Problem TDK DVD-R (TTG01) with 411@811

How to make correctly my media TDK DVD-R 4x by my 411@811. It are taken only in 2X. With Omnipatcher, I do not manage to add new media!?.

“Smart burn Medai Check 3.1.7”
Drive Type = DVD DUAL
Disc Type = DVD-R (Single Layer)
Disc MID = 54 54 47 30 31 00 (TTG01.)
Disc TID = 00 00 00 00 00 00 (…)
Nominal Capacity = 4.38GB
Manufacturer Maybe = TDK Corporation
SMART-BURN Speed Limit = 2.0X (Write) it’s not OK the real speed write is 4X

Here is some specially patch firmware with TTG01 in HS0Q. You can get it here.

I replace the TYG02 strategy, which might work for this media. You can try others by using OmniPatcher.

Thank’s C0deking but “You can try others by using OmniPatcher” I do not know how to make with omnipatcher.


It is very simple, But you should read up a lot on write strategy swapping before making any coasters.

Get OmniPatcher for LiteOn DVD-Writers (v1.3.10) and run it and it shows a window like this, Go up to TTG01 way down and click on it and it opens a second window on which other media id you want to use now. Save the file and run the saved file to flash you drive with the new changes.

First just try to burn the thing @ 2x and see if you get good results. Then go to 4x. If they work then you are already done.