Problem burning iso

vbimport

#1

Hi there. I’m using DVDFab Platinum 4.0.6.2.
I bought a couple of concert videos and wanted to make backups. Both are double layer. The process of making the ISO’s went fine with no errors using Clone. When I tried to burn them, both went to 44% then stopped. I’m using Verbatim DVD+R DL. Here is the log:

00:23:31: Burn DVD image (C:\Documents and Settings\funlog\My Documents\DVDFab\ISO\THE EAGLES DISC 1.iso) started
00:39:07: Task_2 failed! Error=116
00:39:08: Process failed!

Any help you could give me would be appreciated! :slight_smile:


#2

Sorry, forgot to mention that I mounted the ISO on a virtual drive, and everything was there, it looks like it ripped perfectly. Also, I did another ISO, this time with compression to fit on a DVD 5, and it burned no problem. But I would like to get the full DVD as it was meant to be.
Thanks again.


#3

Have you tried using video files and setting the target the same as the destination and letting DVDFab do the rip and burn? I think maybe something is going wrong with handling the layer break in the ISO the way you describe the issue. :confused:


#4

Thanks 90312, I tried what you recommended. This time it went to 54.36% then got the same error. Again it had ripped with no errors, and I checked the temp files folder, and all the vob’s played fine. This has me stumped. Thanks again for trying. :bigsmile:


#5

Sorry you’re having trouble. Please post the burn log, which can be found at C:\Documents and Settings…username…\My Documents\DVDFab\Log. This is a text file that you can open with Notepad and copy and paste into a reply post.


#6

Thanks for responding, here it is:

18/02/2008 2:35:11 PM info ******************** Report session closed *********************
18/02/2008 2:34:42 PM error Write error at 1862528 (16) - Code 04 09 03 [HW error, Spindle servo failure]
18/02/2008 2:21:39 PM info Lead-in burning time (mS) 0
18/02/2008 2:21:05 PM info Write started 3129216 sectors to write
18/02/2008 2:21:05 PM info Layer change set to LBA 1929456 (3.68 Gb.)
18/02/2008 2:21:05 PM info Writing speed requested x4.0, effective x4.0
18/02/2008 2:21:05 PM info layer break set by filesystem builder at 1929456
18/02/2008 2:21:05 PM info Available write speed: 4x
18/02/2008 2:21:05 PM info Media ID: MKM-001-00
18/02/2008 2:21:05 PM info Media type: Dual Layer DVD+R
18/02/2008 2:21:05 PM info Ultra DMA mode 4 (ATA66)
18/02/2008 2:21:03 PM info Optimal Layer Break is in cell 15, around 01:01:00
18/02/2008 2:21:02 PM info Scanned files #15, folder #2 - total size 6407491584 b. (5.97 Gb.)
18/02/2008 2:21:02 PM info Inserted media type : DL DVD+R
18/02/2008 2:21:02 PM info Write started
18/02/2008 2:20:57 PM info New media inserted. Burning layer is ready to write
18/02/2008 2:00:14 PM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
18/02/2008 2:00:14 PM info New Drive selected : 3:0:0 - HL-DT-ST DVD-RAM GSA-H55L 1.05 [D] (Ide)
18/02/2008 1:58:50 PM info Current Drive selected : 3:0:0 - HL-DT-ST DVD-RAM GSA-H55L 1.05 [D] (Ide)
18/02/2008 1:58:50 PM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
18/02/2008 1:58:50 PM info User default language : 4105 (0x1009h) - English (Canadian)
18/02/2008 1:58:50 PM info System default language : 1033 (0x0409h) - English (United States)
18/02/2008 1:58:50 PM info DLL Version 2.1.7.338
18/02/2008 1:58:50 PM info DLL C:\Program Files\DVDFab Platinum 4\vso_hwe.dll
18/02/2008 1:58:50 PM info Version 4, 0, 6, 2
18/02/2008 1:58:50 PM info ExeName : "C:\Program Files\DVDFab Platinum 4\DVDFabPlatinum.exe"
18/02/2008 1:58:50 PM info OS : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
18/02/2008 1:58:50 PM info ******************** Report session started ********************

#7

To further compicate things, I thought I would try a different program to burn the data. Using ImgBurn, I made two perfect copies using the ISO that failed on DVDFab. No errors and they play great. Go figure! Does that mean DVDFab is having problems writing the file? Here is the log from that session:

I 15:13:29 ImgBurn Version 2.3.2.0 started!
I 15:13:30 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 15:13:30 Total Physical Memory: 1,048,048 KB  -  Available: 642,688 KB
I 15:13:30 Initialising SPTI...
I 15:13:30 Searching for SCSI / ATAPI devices...
I 15:13:30 Found 1 DVD-ROM and 1 DVD±RW/RAM!
I 15:16:25 Operation Started!
I 15:16:25 Source File: C:\Documents and Settings\danzig\My Documents\DVDFab\ISO\THE EAGLES DISC 1.iso
I 15:16:25 Source File Sectors: 3,129,200 (MODE1/2048)
I 15:16:25 Source File Size: 6,408,601,600 bytes
I 15:16:25 Source File Volume Identifier: THE EAGLES DISC 1
I 15:16:25 Source File Application Identifier: DVDFAB
I 15:16:25 Source File Implementation Identifier: FENGTAO SOFTWARE
I 15:16:25 Source File File System(s): ISO9660, UDF (1.02)
I 15:16:25 Destination Device: [3:0:0] HL-DT-ST DVD-RAM GSA-H55L 1.05 (D:) (ATA)
I 15:16:25 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 4x)
I 15:16:25 Destination Media Sectors: 4,173,824
I 15:16:25 Write Mode: DVD
I 15:16:25 Write Type: DAO
I 15:16:25 Write Speed: 1x
I 15:16:25 Link Size: Auto
I 15:16:25 Test Mode: No
I 15:16:25 BURN-Proof: Enabled
I 15:17:42 Optimal L1 Data Zone Start LBA: 2073008 (VTS_01, PGC: 1, Cell: 16, Vob/Cell ID: 1/16, Time: 01:05:40, SPLIP: Yes -> No)
I 15:17:42 Optimal L0 Data Zone Capacity: 2,073,008
I 15:17:42 Optimal L0 Data Zone Method: IFO Cell Boundary
I 15:17:43 Filling Buffer... (20 MB)
I 15:17:44 Writing LeadIn...
I 15:18:18 Writing Image... (LBA: 0 - 3129199)
I 15:18:18 Writing Layer 0... (LBA: 0 - 2073007)
I 15:31:49 Writing Layer 1... (LBA: 2073008 - 3129199)
I 15:38:31 Synchronising Cache...
I 15:38:55 Closing Track...
I 15:39:29 Finalising Disc...
I 15:46:00 Image MD5: f7043d72be2c789bce95a8b51ed16bf8
I 15:46:00 Operation Successfully Completed! - Duration: 00:29:34
I 15:46:00 Average Write Rate: 5,163 KB/s (3.7x) - Maximum Write Rate: 5,852 KB/s (4.2x)


#8

Spindle servo error? That sounds bad for the drive huh? Maybe you were trying to write with Fab too fast, looks like 4X and ImgBurn wrote at 1X.


#9

Interesting! I never even looked at that. Also, looking further into the options, I didn’t know you could change burning engines also, I thought they used their own. I was using VSO, but in the drop down menu is ImgBurn. I will try that next time and burn it at 1x and see how it goes. Thanks for the input. :smiley:


#10

looks to me that the layer break has caused the error with VSO. vso has set the layer break at 1929456 and the error occured at 1862528. usually the layer break causes problems with playback not the burning but.

recommended DL write speed is 2.4x.

also there is an update for imgburn. imgburn.com

VSO:

18/02/2008 2:21:05 PM info Writing speed requested x4.0, effective x4.0
18/02/2008 2:21:03 PM info [B]Optimal Layer Break is in cell 15[/B], around 01:01:00
18/02/2008 2:21:05 PM info Layer change set to LBA [B]1929456[/B] (3.68 Gb.)
18/02/2008 2:34:42 PM error Write error at [B]1862528[/B] (16) - Code 04 09 03 [HW error, Spindle servo failure]

imgburn:

I 15:17:42 Optimal L1 Data Zone Start LBA: [B]2073008[/B] (VTS_01, PGC: 1, [B]Cell: 16[/B], Vob/Cell ID: 1/16, Time: 01:05:40, SPLIP: Yes -> No)
I 15:16:25 Write Speed: 1x
I 15:46:00 Average Write Rate: 5,163 KB/s (3.7x) - Maximum Write Rate: 5,852 KB/s (4.2x)


#11

Hmmm, trying to change the engine to ImgBurn, but a pop-up keeps saying “Failed to initialize burning engine” and restart computer or reinstall. So I deleted DVDFab as recommended in another thread to get rid of all the traces left behind and reinstalled. I also upgraded ImgBurn to the latest file. Still I get the same message every time. No big deal, I’ll just rip with DVDFab and write with standalone ImgBurn.


#12

The change log on the latest beta release claims to have corrected this issue. Have you tried 4.0.6.5 yet?