Problem burning DVD with BTC DRW-1108IM

vbimport

#1

Hey…

Im having a problem with my burner…
I have BTC DRW-1108IM and have, had it for 10month or so…
In the beginning it worked fine. Both with DVD and CD…

But not, i can burn CD and read CD…

But i cant Burn DVD…
Im trying to burn with nero 6.3 (i have tried with older and new version) same error. I have tried with different media… (still same)
And i have now tried installing windows all over. (Still same)
I have also tried with different files. Both burning image, or just burn data or sound. (still same error)…
And have updated the drive with latest firmware according to www.drvupdate.com

My error is, that it burns fine, but only until it reaches 19% When it burns fine, its flashing orange on front… Then when it reaches 19% it starts flashing green. And the disk spinns up… And then it stays there for 9min. before it spit out an error…

I have copied log file, so you all can see… And hopefully tell me what im doing wrong…

cains

1A23-0097-7030-1393-4803-6544

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead
ero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 11/11/2003 2:49:52 PM 
Nero version: 6.3.0.0 (Nero Express)
Recorder:             <DVDRW IDE1108>           Version: B430 - HA 1 TA 1 - 6.3.0.0
 Adapter driver:      <IdeChnDr>                HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               <DVDRW    IDE1108         >Version: B430 - HA 1 TA 1 - 6.3.0.0
 Adapter driver:      <IdeChnDr>                HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : HDS728040PLAT20               IdeChnDr Port 1 ID 0  DMA: On 
CdRomPeripheral      : DVDRW IDE1108                 IdeChnDr Port 1 ID 1  DMA: Off
DiskPeripheral       : WDC WD1200BB-00DAA0           IdeChnDr Port 2 ID 0  DMA: On 
DiskPeripheral       : HDS722512VLAT20               IdeChnDr Port 2 ID 1  DMA: Off
DiskPeripheral       : Promise 1+0 Stripe/RAID01.10  fasttx2k Port 3 ID 0  DMA: Off

=== CDRom-Device-Map ===
DVDRW IDE1108              F:   CDRom0
=======================

AutoRun : 1
Excluded drive IDs: 
CmdQueuing     : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed     : 0
BUFE           : 0
Physical memory     : 511MB (523732kB)
Free physical memory: 280MB (287144kB)
Memory in use       : 45 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

15.7.2005
Burn DVD Image
8:00:24 AM	#1 Text 0 File Reader.cpp, Line 118
	Reader running
	
8:00:24 AM	#2 Text 0 File Writer.cpp, Line 124
	Writer DVDRW    IDE1108          running
	
8:00:24 AM	#3 Text 0 File Burncd.cpp, Line 3094
	Turn on Disc-at-once, using DVD media
	
8:00:51 AM	#4 Text 0 File DlgWaitCD.cpp, Line 239
	Last possible write address on media:  2298495 (510:46.45)
	Last address to be written:            2282500 (507:13.25)
	
8:00:51 AM	#5 Text 0 File DlgWaitCD.cpp, Line 244
	Write in overburning mode: FALSE
	
8:00:51 AM	#6 Text 0 File DlgWaitCD.cpp, Line 2068
	Recorder: DVDRW IDE1108, Media type: DVD-R
	 Disc Manufacturer: RITEKG - 05
	 Disc Application Code: 64, Disc Physical Code: 193
	
8:00:51 AM	#7 Text 0 File DlgWaitCD.cpp, Line 405
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	Insert empty disc to write to.
		(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)
	
8:00:51 AM	#8 Text 0 File ThreadedTransferInterface.cpp, Line 779
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 2282501 (2282501) = #2282501/507:13.26
	    not relocatable, disc pos for caching/writing not required/not required, no patch infos 
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2282501 blocks [DVDRW    IDE1108         ]
	--------------------------------------------------------------
	
8:00:51 AM	#9 Text 0 File ThreadedTransferInterface.cpp, Line 948
	Prepare recorder [DVDRW    IDE1108         ] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4674562048, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
	       0 |  lead-in |   0 |   0x00 |  0x41
	       0 |        1 |   0 |   0x00 |  0x41
	       0 |        1 |   1 |   0x00 |  0x41
	 2282501 | lead-out |   1 |   0x00 |  0x41
	
8:00:51 AM	#10 Phase 24 File dlgbrnst.cpp, Line 1800
	Caching of files started
	
8:00:51 AM	#11 Text 0 File Burncd.cpp, Line 4061
	Cache writing successful.
	
8:00:51 AM	#12 Phase 25 File dlgbrnst.cpp, Line 1800
	Caching of files completed
	
8:00:51 AM	#13 Phase 36 File dlgbrnst.cpp, Line 1800
	Burn process started at 8x (11,040 KB/s)
	
8:00:51 AM	#14 Text 0 File ThreadedTransferInterface.cpp, Line 2264
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
8:00:51 AM	#15 Text 0 File dlgbrnst.cpp, Line 1658
	Set remaining time: 14:08,970 (848970ms) -> OK
	
8:00:51 AM	#16 Text 0 File DVDR.cpp, Line 1424
	Recording mode: Sequential Recording Mode
	
8:00:51 AM	#17 Text 0 File Mmc.cpp, Line 19397
	Set BUFE: Super Link -> ON 
	
8:00:51 AM	#18 Text 0 File DVDR.cpp, Line 1539
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
8:00:51 AM	#19 Text 0 File Cdrdrv.cpp, Line 7912
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R   (2), Part Version: 5
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      0 h
	 End Sector Number in Layer 0:                 0 h
	 Data in Burst Cutting Area (BCA) does not exist
	 Media Specific:
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	
8:00:58 AM	#20 Text 0 File Cdrdrv.cpp, Line 1276
	08:00:58.206 - DVDRW IDE1108\H1 T1 : Queue again later
	
8:13:06 AM	#21 SCSI -1135 File Cdrdrv.cpp, Line 1430
	SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04280000
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x0C
	Sense Qual: 0x00
	CDB Data:   0x2A 0x00 0x00 0x06 0x67 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 
	Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 
	            0x00 0x00 0x00 0x00 0x0C 0x00 
	
8:13:06 AM	#22 CDR -1135 File Writer.cpp, Line 301
	Write error
	
8:13:06 AM	#23 Text 0 File ThreadedTransfer.cpp, Line 229
	all writers idle, stopping conversion
	
8:13:07 AM	#24 Text 0 File ThreadedTransfer.cpp, Line 223
	conversion idle, stopping reader
	
8:13:07 AM	#25 Text 0 File DVDR.cpp, Line 1743
	EndDAO: Last written address was 419775
	
8:13:07 AM	#26 Text 0 File dlgbrnst.cpp, Line 1658
	Set remaining time: 0:00,000 (0ms) -> OK
	
8:13:07 AM	#27 Text 0 File dlgbrnst.cpp, Line 1658
	Set remaining time: 0:00,000 (0ms) -> OK
	
8:13:07 AM	#28 Phase 38 File dlgbrnst.cpp, Line 1800
	Burn process failed at 8x (11,040 KB/s)
	

Existing drivers:
File 'Drivers\IdeChnDr.sys': Ver=2.3.0.2160, 10/01/2002, size=101431 bytes, created 10/15/2002 12:00:00 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

This is how it looks… Hope someone can help me… And if you need more info. Just write… Im happy for help the help i can get…

Thanks in advance…

/ cains