Problem Burning Dual Layer Discs with LG GSA-4163B

Burning image file by imgburn. DVD using is Mitsubishi dvd+r dl 2.4x.

HL-DT-ST DVDRAM GSA-4163B A106 (RAID)
Current Profile: DVD+R DL

Disc Information:
Status: Empty
Erasable: No
Free Sectors: 4,173,824
Free Space: 8,547,991,552 bytes
Free Time: 927:32:74 (MM:SS:FF)
Supported Write Speeds: 2.4x

DVD±R DL Boundary Information:
L0 Data Zone Capacity: 2,086,912
Changeable: Yes

Disc Control Blocks Information:
HL-DT-ST GSA-4163B

Physical Format Information (Last Recorded):
Disc ID: CMC MAG-D04-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519

error:

I 17:30:05 Destination Device: [4:0:0] HL-DT-ST DVDRAM GSA-4163B A106 (H:) (RAID)
I 17:30:05 Destination Media Type: DVD+R DL (Disc ID: CMC MAG-D04-00) (Speeds: 2.4x)
I 17:30:05 Destination Media Sectors: 4,173,824
I 17:30:05 Write Mode: DVD
I 17:30:05 Write Type: DAO
I 17:30:05 Write Speed: MAX
I 17:30:05 Link Size: Auto
I 17:30:05 Test Mode: No
I 17:30:05 OPC: No
I 17:30:05 BURN-Proof: Enabled
I 17:30:05 Book Type Setting: N/A
I 17:30:07 Optimal L1 Data Zone Start LBA: 1913968 (VTS_01, PGC: 1, Cell: 31, Vob/Cell ID: 1/31, Time: 01:37:56, SPLIP: No)
I 17:30:07 Optimal L0 Data Zone Capacity: 1,913,968
I 17:30:07 Optimal L0 Data Zone Method: IFO Cell Boundary, ‘SPLIP’ Flag Not Set
E 17:30:12 Failed to set L0 Data Zone Capacity!
E 17:30:12 Reason: Write Error
E 17:30:12 Operation Failed! - Duration: 00:00:07

[QUOTE=JohneCheah;2154077]Burning image file by imgburn. DVD using is Mitsubishi dvd+r dl 2.4x.

HL-DT-ST DVDRAM GSA-4163B A106 [B]U[/U][/B]
Current Profile: DVD+R DL

Disc Information:
Status: Empty
Erasable: No
Free Sectors: 4,173,824
Free Space: 8,547,991,552 bytes
Free Time: 927:32:74 (MM:SS:FF)
Supported Write Speeds: 2.4x

DVD±R DL Boundary Information:
L0 Data Zone Capacity: 2,086,912
Changeable: Yes

Disc Control Blocks Information:
HL-DT-ST GSA-4163B

Physical Format Information (Last Recorded):
Disc ID: [U][B]CMC MAG-D04-00[/B][/U]
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519

error:

I 17:30:05 Destination Device: [4:0:0] HL-DT-ST DVDRAM GSA-4163B A106 (H:) (RAID)
I 17:30:05 Destination Media Type: DVD+R DL (Disc ID: CMC MAG-D04-00) (Speeds: 2.4x)
I 17:30:05 Destination Media Sectors: 4,173,824
I 17:30:05 Write Mode: DVD
I 17:30:05 Write Type: DAO
I 17:30:05 Write Speed: MAX
I 17:30:05 Link Size: Auto
I 17:30:05 Test Mode: No
I 17:30:05 OPC: No
I 17:30:05 BURN-Proof: Enabled
I 17:30:05 Book Type Setting: N/A
I 17:30:07 Optimal L1 Data Zone Start LBA: 1913968 (VTS_01, PGC: 1, Cell: 31, Vob/Cell ID: 1/31, Time: 01:37:56, SPLIP: No)
I 17:30:07 Optimal L0 Data Zone Capacity: 1,913,968
I 17:30:07 Optimal L0 Data Zone Method: IFO Cell Boundary, ‘SPLIP’ Flag Not Set
E 17:30:12 Failed to set L0 Data Zone Capacity!
E 17:30:12 Reason: Write Error
E 17:30:12 Operation Failed! - Duration: 00:00:07[/QUOTE]

Hi JohneCheah

First of all why is your drive in raid more? most drives work fine as IDE, second i dont trust CMC dual layer (i dont like them even in single layer, but thats just me), and third (and final) i would not use other media (especially with an old drive) other than verbatim.