Power calibration error, couldnt perform end track

[manchester_united]

i have been trying to burn microsoft fligh imsulator 2004 iso images (4 images on to 4 cds) but i get error messages. below is my log file please read it and tell me what it is i am doing wrong. i have been using nero 6 and this is the log file it gave me.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b

Recorder: <_NEC DVD+RW ND-1100A> Version: 1.90 - HA 3 TA 1 - 6.6.0.16
Adapter driver: HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: Version: F310 - HA 3 TA 0 - 6.6.0.16
Adapter driver: HA 3

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-75CAA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 3 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+RW ND-1100A atapi Port 3 ID 1 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a vax347s Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616T D: CDRom0
_NEC DVD+RW ND-1100A E: CDRom1
SCSIVAX DVD/CD-ROM G: CDRom2

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523244kB)
Free physical memory: 280MB (287700kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

2.11.2005
CD Image
18:33:45 #1 Text 0 File Burncd.cpp, Line 2948
_NEC DVD+RW ND-1100A
Buffer underrun protection activated

18:33:45 #2 Text 0 File Reader.cpp, Line 127
Reader running

18:33:45 #3 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD+RW ND-1100A running

18:33:45 #4 Text 0 File Burncd.cpp, Line 3233
Turn on Track-At-Once, using CD-R/RW media

18:33:46 #5 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: -151 (954437:10.45)
Last address to be written: 1631 ( 0:23.56)

18:33:46 #6 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

18:33:46 #7 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD+RW ND-1100A;
CDRW code: 00 00 00 00; CD manufacturer unknown
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

18:33:46 #8 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<

18:33:46 #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 1632 (1632) = #1632/0:21.57
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1630 blocks [_NEC DVD+RW ND-1100A]

18:33:46 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD+RW ND-1100A] for write in TAO
DAO infos:

MCN: “”
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 3649536, ISRC “”
DAO layout:

Start|Track|Idx|CtrlAdr|RecDep_____
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1632 | lead-out | 1 | 0x41 | 0x00

18:33:46 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 2 run-out blocks from end of track 1. Length: 1632 -> 1630.

18:33:46 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

18:33:46 #13 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

18:33:46 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

18:33:46 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (600 KB/s)

18:33:46 #16 SCSI -1189 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 3, TA 1, LUN 0, buffer 0x036A5A00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x02

18:33:46 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

18:33:46 #18 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON

18:34:16 #19 SCSI -1106 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 3, TA 1, LUN 0, buffer 0x042E0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

18:34:16 #20 CDR -1106 File Writer.cpp, Line 311
Power calibration error

18:34:16 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

18:34:16 #22 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
_NEC DVD+RW ND-1100A\H3 T1

18:34:16 #23 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack

18:34:16 #24 Text 0 File Mmc.cpp, Line 16352
<_NEC DVD+RW ND-1100A > start Close Session

18:34:16 #25 SCSI -1176 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 3, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x04

18:34:16 #26 CDR -1176 File WriterStatus.cpp, Line 249
Session fixation error

18:34:16 #27 TRANSFER -19 File WriterStatus.cpp, Line 249
Could not perform Fixation

18:34:16 #28 Text 0 File WriterStatus.cpp, Line 258
falling back to disc fixation

18:34:16 #29 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (600 KB/s)

Existing drivers:
File ‘WNASPINT.DLL’: Ver=V1.18, size=57344 bytes, created 30/10/2005 13:26:12
File ‘Drivers\atapi.sys’: Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 16/07/2003 20:24:25 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

I have tried using 2 different media types (cd brands). i have usd phillips and this other one. please help me!

[wilyliam]

Greetings!

I’ve been struggling with this “power calibration error” for several weeks now, and accidentally discovered something interesting yesterday.

First of all: The built in CDR on my Tecra M4 is a Matshita - and trying to burn with Nero 6 or 7 and this bad boy is the first time I ever encountered such an error. Ever. Tried at least four kinds of media - no difference (it’s been suggested by MANY people, to INCLUDE Nero tech support, to change media.) There is no updated firmware for this thing yet, and it’s brand new, so I know it’s not dirty.

So I tried purchasing a Plextor external DVD burner. The Cadillac of drives - and I got the exact same error.

However - since yesterday, I noticed that I only really got the error whenever I try to burn IMAGE files. This morning, I tried putting together multiple compilations of various kinds of files (just randomly from My Documents) and burned about 5 CDs at 48x on the Plextor without a single reported error. Then try to burn a .iso, and it fails.

Then I tried using Alcohol120% to burn some .iso files - burned about 5 without any trouble.

So - I seem to be able to use Nero 7 with my Plextor to burn anything except .iso files? And yet I can burn all the .iso I want in either the Plextor or the Matshita with Alcohol120% without any trouble.

So I’m thinking it’s a fairly isolated Nero problem . . .

Hope this gets the conversation rolling . . .

Wily

[TimC]

@manchester united.

The NEC1100 is a poor CD writer, at least mine was. Try using DVD Decrypter or ImgBurn to burn the image. These 2 might do a better job.