PMA update failure with Sony 710A

vbimport

#1

Hi,

I got my new Sony 710A & tried to burn a movie with DVDShrink 3.2 & Nero 6.3 Sony edition, at the last step of Nero burning I got “PMA update failure”. The media which I used was Maxell 8x DVD-R, pls suggest what might be the cause of this kind of error?

This was the first DVD drive for me… would be helpful if I can get any clue & suggestions to overcome such errors…

Log file content:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead
ero\Wnaspi32.dll’: Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero version: 6.3.1.19 (Nero Express)
Recorder: <SONY DVD RW DRU-710A> Version: BY03 - HA 2 TA 0 - 6.3.1.19
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SAMSUNG CDRW/DVD SN-324F>Version: U203 - HA 0 TA 0 - 6.3.1.19
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : SAMSUNG CDRW/DVD SN-324F atapi Port 0 ID 0 DMA: On
DiskPeripheral : IC25N040ATMR04-0 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
SAMSUNG CDRW/DVD SN-324F D: CDRom0
SONY DVD RW DRU-710A E: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523604kB)
Free physical memory: 221MB (226924kB)
Memory in use : 56 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.2.2005
Burn DVD Image
5:49:24 AM #1 Phase 94 File dlgbrnst.cpp, Line 1865
Power-Burn activated

5:49:24 AM #2 Text 0 File Reader.cpp, Line 118
Reader running

5:49:24 AM #3 Text 0 File Writer.cpp, Line 124
Writer SONY DVD RW DRU-710A running

5:49:24 AM #4 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-at-once, using DVD media

5:49:24 AM #5 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286072 (508:00.72, 4464MB)

5:49:24 AM #6 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)

5:49:24 AM #7 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: SONY DVD RW DRU-710A, Media type: DVD-R
Disc Manufacturer: MXL RG - 03
Disc Application Code: 64, Disc Physical Code: 193

5:49:24 AM #8 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<

5:49:24 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286073 (2286073) = #2286073/508:0.73
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286073 blocks [SONY DVD RW DRU-710A ]

5:49:24 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [SONY DVD RW DRU-710A ] for write in CUE-sheet-DAO
DAO infos:

MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681877504, ISRC “”
DAO layout:

_Start|___Track|Idx|RecDep|CtrlAdr
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286073 | lead-out | 1 | 0x00 | 0x41

5:49:25 AM #11 Phase 24 File dlgbrnst.cpp, Line 1865
Caching of files started

5:49:25 AM #12 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.

5:49:25 AM #13 Phase 25 File dlgbrnst.cpp, Line 1865
Caching of files completed

5:49:25 AM #14 Phase 36 File dlgbrnst.cpp, Line 1865
Burn process started at 8x (11,080 KB/s)

5:49:25 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

5:49:25 AM #16 Text 0 File dlgbrnst.cpp, Line 1723
Set remaining time: 7:07,629 (427629ms) -> OK

5:49:25 AM #17 Text 0 File DVDR.cpp, Line 1932
Recording mode: Sequential Recording Mode

5:49:25 AM #18 Text 0 File Mmc.cpp, Line 20464
Set BUFE: Power-Burn -> ON , Generic write control : ON

5:49:25 AM #19 Text 0 File DVDR.cpp, Line 2073
Start write address at LBA 0
DVD high compatibility mode: Yes

5:49:25 AM #20 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

5:49:50 AM #21 Text 0 File Cdrdrv.cpp, Line 1294
05:49:50.938 - SONY DVD RW DRU-710A\H2 T0 : Queue again later

5:58:42 AM #22 Text 0 File WriterStatus.cpp, Line 115
<SONY DVD RW DRU-710A > start writing Lead-Out at LBA 2286073 (22E1F9h), lenght 0 blocks

5:58:42 AM #23 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

5:58:42 AM #24 Text 0 File DVDR.cpp, Line 2315
EndDAO: Last written address was 2286079

5:59:09 AM #25 SCSI -1194 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x04

5:59:09 AM #26 Text 0 File dlgbrnst.cpp, Line 1723
Set remaining time: 0:00,000 (0ms) -> OK

5:59:09 AM #27 CDR -1194 File ThreadedTransferInterface.cpp, Line 1708
PMA update failure

5:59:09 AM #28 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1708
Could not perform end of Disc-at-once

5:59:09 AM #29 Text 0 File DVDR.cpp, Line 2315
EndDAO: Last written address was -1

5:59:09 AM #30 Text 0 File dlgbrnst.cpp, Line 1723
Set remaining time: 0:00,000 (0ms) -> OK

5:59:09 AM #31 Text 0 File dlgbrnst.cpp, Line 1723
Set remaining time: 0:00,000 (0ms) -> OK

5:59:09 AM #32 Phase 38 File dlgbrnst.cpp, Line 1865
Burn process failed at 8x (11,080 KB/s)

Existing drivers:
File ‘Drivers\ADPU160M.SYS’: Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 1:37:32 AM
File ‘Drivers\PXHELP20.SYS’: Ver=2.02.62a, size=20016 bytes, created 10/28/2003 3:32:00 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 11:29:42 AM

(Adapter driver for src)

Thanks,
Ambi