Pioneer DVR-111D Reset occured

vbimport

#1

I am aware that there have been similar posts but I need a recommendation on how to proceed. I just bought a new PC and I put on it my DVR-111D which worked just fine on the old PC. As I can see from the log

CdRomPeripheral : PIONEER DVD-RW DVR-111D atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SDM2012C atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX230E atapi Port 1 ID 1 DMA: On
DiskPeripheral : WDC WD1600JS-22MHB0 SiSRaid2 Port 2 ID 0 DMA: Off

DMA is off on my hard drive. However in the Device Manager under RAID controllers it says

UDMA Supported: 6 (UDMA 133)
Device Current Used: UDMA mode 6

So I’m wondering if it is Nero that cannot identify the DMA (Nero 6.6.1.4) or do I need to enable the DMA for the hard drive (which I think already is). Any help would be appreciated. Thanks.


#2

Hi,

Nero is not able to detect DMA mode on drives, that are connected to controllers that run with drivers from their manufacturers.
So there is nothing to be worried about.

Michael