Pioneer 116 - Lose auto-bitset after patch?

vbimport

#1

I patched my Pioneer DVR-116D with MCSE (rpc1, read speed, and ‘enable bitsetting’)

I burned a DVD with ImgBurn but it’s showing up as DVD+R DL in the booktype. Did I lose the ‘autobitset on +R DL’ that comes stock on the Pioneer 116 1.09 firmware?

I figured I’d hit ‘enable bitsetting’ when I patched to give me the option, but then ImgBurn didn’t have a way for Pioneer drives to be bitset (unless it’s under a different name?)…so i’m not quite sure what i’ve done here :slight_smile:

Thanks


#2

Sorry, I think I was confusing it for something else. This is correct, right?

PIONEER DVD-RW DVR-116D 1.09 (ATA)
Current Profile: DVD+R DL

Disc Information:
Status: Complete
Erasable: No
Sessions: 1
Sectors: 3,964,576
Size: 8,119,451,648 bytes
Time: 881:03:01 (MM:SS:FF)

TOC Information:
Session 1… (LBA: 0)
-> Track 01 (Mode 1, LBA: 0 - 3964575)
-> LeadOut (LBA: 3964576)

Track Information:
Session 1…
-> Track 01 (LTSA: 0, TS: 3964576, LRA: 0)

Disc Control Blocks Information:
PIONEER DVR-116D

Physical Format Information (ADIP):
Disc ID: MKM-001-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519

Physical Format Information (Last Recorded - L0):
Disc ID: MKM-001-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,178,895

Physical Format Information (Last Recorded - L1):
Disc ID: MKM-001-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,178,895

Layer Information:
Layer 0 Sectors: 1,982,288 (50%)
Layer 1 Sectors: 1,982,288 (50%)


#3

That’s correct. Your discs are still being bitset. The second [and third, since it’s DL] item you bolded is what you want to look for. :slight_smile:


#4

Albert, thank you :slight_smile:

It’s always humbling to be a newbie again.