Pioneer 111D Firmware Upgraded now problems

vbimport

#1

Hi guys just upgraded my pioneer dvd drive to 1.29 from 1.23 from the offical website.

Been burning ritek and tdk discs fine . Since updating i burned 3 discs and 2 failed within the first few percent. Only burning at 4x speed using nero.

Any ideas as to what my problem is please.

Thanks


#2

copy of the log error …

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4

Recorder: <PIONEER DVD-RW DVR-111D>Version: 1.29 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 1 TA 1 - 7.0.1.4
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : NVIDIA STRIPE 465.77G nvraid Port 0 ID 1 DMA: Off
CdRomPeripheral : PIONEER DVD-RW DVR-111D atapi Port 1 ID 0 DMA: On
DiskPeripheral : WDC WD2500KS-22MJB0 nvatabus Port 3 ID 0 DMA: Off
DiskPeripheral : WDC WD2500KS-00MJB0 nvatabus Port 3 ID 2 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 6 ID 0 DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-111D H: CDRom0
Generic DVD-ROM I: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2096608kB)
Free physical memory: 1534MB (1571528kB)
Memory in use : 25 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

30.3.2007
Burn DVD Image
23:08:02 #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory

23:08:02 #2 Text 0 File Reader.cpp, Line 124
Reader running

23:08:02 #3 Text 0 File Writer.cpp, Line 113
Writer H: PIONEER DVD-RW DVR-111D running

23:08:02 #4 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media

23:08:02 #5 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2295061 (510:00.61, 4482MB)

23:08:02 #6 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

23:08:02 #7 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: PIONEER DVD-RW DVR-111D, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

23:08:02 #8 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

23:08:02 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1)
2 indices, index0 (150) not provided
original disc pos #0 + 2295062 (2295062) = #2295062/510:0.62
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2295062 blocks [H: PIONEER DVD-RW DVR-111D]
--------------------------------------------------------------

23:08:02 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [H: PIONEER DVD-RW DVR-111D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4700286976, ISRC ""
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2295062 | lead-out | 1 | 0x41 | 0x00

23:08:02 #11 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

23:08:02 #12 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started

23:08:02 #13 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.

23:08:02 #14 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed

23:08:02 #15 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5,540 KB/s)

23:08:02 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

23:08:02 #17 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode

23:08:02 #18 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON

23:08:02 #19 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes

23:08:02 #20 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`…0@P…!..
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

23:08:03 #21 CDR -1 File Writer.cpp, Line 302
Unspecified Recorder Error
H: PIONEER DVD-RW DVR-111D

23:08:04 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

23:08:04 #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

23:08:04 #24 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 767

23:08:34 #25 CDR -1 File WriterStatus.cpp, Line 167
Unspecified Recorder Error
H: PIONEER DVD-RW DVR-111D

23:08:34 #26 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

23:08:34 #27 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 4x (5,540 KB/s)

Existing drivers:
File ‘Drivers\scsiport.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 04/08/2004 02:07:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#3

I read about cross flashing to 111L would this help?


#4

Crossflash to 111L because the 111L its the best… and stop using crap media like Ritek and TDK… Use VERBATIM… :bigsmile: :bigsmile: :bigsmile:


#5

Yup, media problem.

How is the burner exactly connected? To an IDE RAID controller?