Pioneer 106D - Internal Target Failure

vbimport

#1

My previously working setup has deteriorated to the point that it rarely succeeds. I can write CDs ok but not DVDs. I don’t think it’s media as I have two different types that have worked in the past (and even recently). Not software either I think as have tried with several. I’ve been fighting with it for so long and am very close to just buying new writer but am still hopeful of a solution. I saw advice on a forum to change some ErrorControl entry in the registry and my next burn was successful but then back to failure.

Eternal gratitude awaits anyone who can help.

Thanks,

odh

Here’s the Nero dump:

Windows 2000 5.0
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 11:06:00
ahead WinASPI: File ‘C:\Program Files\ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.56, size=163910 bytes, created
Nero version: 6.0.0.0
Recorder: <PIONEER DVD-RW DVR-106D>Version: 1.08 - HA 1 TA 0 - 6.0.0.0
Adapter driver: <nvatabus> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-ROM DVD-120S>Version: 1.01 - HA 1 TA 1 - 6.0.0.0
Adapter driver: <nvatabus> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3120026AS 3.05 si3112r Port 0 ID 0 DMA: ?
DiskPeripheral : Maxtor 4D040H2 DAK0 si3112r Port 0 ID 0 DMA: ?
CdRomPeripheral : PIONEER DVD-RW DVR-106D nvatabus Port 1 ID 0 DMA: ?
CdRomPeripheral : PIONEER DVD-ROM DVD-120S nvatabus Port 1 ID 1 DMA: ?

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 672MB (688716kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.2.2005
DVD-Video
15:00:56 #1 Phase 112 File dlgbrnst.cpp, Line 1818
DVD-Video files reallocation started

15:00:56 #2 Text 0 File DVDVideoCompilation.cpp, Line 540
Content of VIDEO_TS.IFO has been modified

15:00:56 #3 Text 0 File DVDVideoCompilation.cpp, Line 540
Content of VIDEO_TS.BUP has been modified

15:00:56 #4 Text 0 File DVDVideoCompilation.cpp, Line 540
Content of VTS_01_0.IFO has been modified

15:00:56 #5 Text 0 File DVDVideoCompilation.cpp, Line 540
Content of VTS_01_0.BUP has been modified

15:00:56 #6 Phase 113 File dlgbrnst.cpp, Line 1818
DVD-Video files reallocation completed

15:00:56 #7 Text 0 File Isodoc.cpp, Line 5451
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

15:00:56 #8 Phase 111 File dlgbrnst.cpp, Line 1818
DVD-Video files sorted

15:00:56 #9 Text 0 File Reader.cpp, Line 118
Reader running

15:00:56 #10 Text 0 File Writer.cpp, Line 127
Writer PIONEER DVD-RW DVR-106D running

15:00:56 #11 ISO9660GEN -11 File geniso.cpp, Line 3814
First writeable address = 0 (0x00000000)

15:00:56 #12 ISO9660GEN -11 File geniso.cpp, Line 3814
First writeable address = 0 (0x00000000)

15:00:56 #13 Text 0 File Burncd.cpp, Line 3081
Turn on Disc-at-once, using DVD media

15:00:57 #14 Text 0 File DlgWaitCD.cpp, Line 224
Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 474703 (105:29.28)

15:00:57 #15 Text 0 File DlgWaitCD.cpp, Line 229
Write in overburning mode: FALSE

15:00:57 #16 Text 0 File DlgWaitCD.cpp, Line 1688
Recorder: PIONEER DVD-RW DVR-106D, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193

15:00:57 #17 Text 0 File ThreadedTransferInterface.cpp, Line 757
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 474704 (474704) = #474704/105:29.29
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 474704 blocks [PIONEER DVD-RW DVR-106D]
--------------------------------------------------------------

15:00:57 #18 Text 0 File Burncd.cpp, Line 3318
Recorder and media-info

=======================

Burning to PIONEER DVD-RW  DVR-106D on a DVD-R media

15:00:57 #19 Text 0 File ThreadedTransferInterface.cpp, Line 910
Prepare recorder PIONEER DVD-RW DVR-106D for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC “”, FilePos 0 307200 972500992

15:00:57 #20 Phase 24 File dlgbrnst.cpp, Line 1818
Caching of files started

15:00:57 #21 Phase 25 File dlgbrnst.cpp, Line 1818
Caching of files completed

15:00:57 #22 Phase 28 File dlgbrnst.cpp, Line 1818
Speed measurement started

15:00:57 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2104
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

15:02:17 #24 Text 0 File WriterStatus.cpp, Line 112
<PIONEER DVD-RW DVR-106D> start writing Lead-Out at LBA 474704 (73E50h), lenght 0 blocks

15:02:17 #25 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion

15:02:17 #26 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 0:00,000 (0ms) -> OK

15:02:17 #27 Phase 29 File dlgbrnst.cpp, Line 1768
Speed measurement completed: 8.6x (11,868 KB/s)

15:02:17 #28 Phase 36 File dlgbrnst.cpp, Line 1818
Burn process started at 4x (5,520 KB/s)

15:02:17 #29 Text 0 File ThreadedTransferInterface.cpp, Line 2104
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

15:02:17 #30 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 3:17,335 (197335ms) -> OK

15:02:18 #31 Text 0 File DVDR.cpp, Line 1407
Recording mode: Sequential Recording Mode

15:02:18 #32 Text 0 File Mmc.cpp, Line 18119
Set BUFE: supported -> ON

15:02:18 #33 Text 0 File DVDR.cpp, Line 1522
Start write address at LBA 0
DVD high compatibility mode: Yes

15:02:18 #34 Text 0 File Cdrdrv.cpp, Line 7827
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

15:02:18 #35 Text 0 File Writer.cpp, Line 318
15:02:18.484 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

15:02:22 #36 SCSI -1061 File Cdrdrv.cpp, Line 1361
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0A080000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0xD9
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x44 0xD9

15:02:22 #37 CDR -1061 File Writer.cpp, Line 335
Internal target failure

15:02:23 #38 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion

15:02:23 #39 Text 0 File ThreadedTransfer.cpp, Line 221
conversion idle, stopping reader

15:02:23 #40 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 0:00,000 (0ms) -> OK

15:02:23 #41 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 0:00,000 (0ms) -> OK

15:02:23 #42 Phase 38 File dlgbrnst.cpp, Line 1818
Burn process failed at 4x (5,520 KB/s)

Existing drivers:
File ‘Drivers\CDR4_2K.SYS’: Ver=5.3.2.31, size=58000 bytes, created 09/08/2003 11:05:43
File ‘Drivers\CDRALW2K.SYS’: Ver=5.3.2.31, size=23420 bytes, created 09/08/2003 11:05:43
File ‘Drivers\ASPI32.SYS’: Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 11:06:00
File ‘Drivers
vatabus.sys’: Ver=5.10.2600.0366 built by: WinDDK, size=54656 bytes, created 02/09/2003 15:51:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======


#2

This Nero version is very obsolete! Update it if you can.

You are using Nero, it’s FAQ is very helpful:


#3

Thanks for the reply - upgraded to no avail - exact same error.

Running out of ideas, guess I’ll just have to bite the bullet and buy new drive.


#4

You shouldn’t give up that easily.

Have you read the FAQ carefully?

What does the command “DVRFlash -v X:” give as output (replace X: with the correct driveletter)?

Does the drive recognize CD or DVD media at all (eg. in Nero)?