Philips SPD2414T doesn't burn DVDs

vbimport

#1

[qanda]This thread is about the Philips SPD2414. Click here to see full specs[/qanda]Hi,

My half year old Philips SPD2414T DVD burner doesn’t burn DVDs anymore. It was working fine until last week, but then started to make trouble. It started with DVDs burned with errors - usually a few sectors at end of the disc. Now it does’t even start to burn.

It takes a lot of time to write a Lead-In, and when it is finished, burning status rises to 2%. Buffer Level goes to 97% and the discs spins like crazy for a minute or two. In 95% of cases nothing happens, and Nero ejects the disc and reports a write error. In that case I can burn the same disc on my laptop. In 5% of cases the recording process goes to 3-100% and then there comes a write error report and that disc can’t be used anymore.

I’m using Nero 8, and TraxData DVD-R media. Since the trouble started I tried also with Verbatim and Philips DVD-Rs. Always the same.

The drive reads fine.

I hope someone can help. This is not a very old drive. I burned 100 DVDs at most.

Thank you in advance

PS This is Nero report:

Windows Vista 6.0
AMD64
Wow64Process
WinAspi: -

NT-SPTI used
Nero Version: 8.3.6.0
Internal Version: 8, 3, 6, 0

Recorder: <PHILIPS SPD2414T> Version: P1.0 - HA 1 TA 0 - 8.3.6.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <PHILIPS SPD2414T >Version: P1.0 - HA 1 TA 0 - 8.3.6.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : SBU 4H6VS96J 1.03 aa8dsno0 Port 6 ID 0 DMA: Off

=== CDRom-Device-Map ===
PHILIPS SPD2414T E: CdRom0
SBU 4H6VS96J F: CdRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 4094MB (4192724kB)
Free physical memory: 2329MB (2385152kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.8.2008
ISO compilation
12:03:21 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

12:03:21 #2 Text 0 File Isodoc.cpp, Line 6713
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

12:03:21 #3 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)

12:03:22 #4 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using DVD media

12:03:22 #5 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator ‘CUDFSettingsValidatorDVD’
ParamMode = ‘automatic’, changing UDF partition type from ‘physical’ to ‘physical’
Changing UDF revision from ‘1.02’ to ‘1.02’

12:03:22 #6 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2283615 (507:28.15, 4460MB)

12:03:22 #7 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)

12:03:22 #8 Text 0 File DlgWaitCD.cpp, Line 2948
Recorder: PHILIPS SPD2414T, Media type: DVD+R
Disc Manufacturer ID: <MCC>, Media Type ID: <004>, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

12:03:22 #9 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:03:22 #10 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2283616 (2283616) = #2283616/507:28.16
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283616 blocks [E: PHILIPS SPD2414T]
--------------------------------------------------------------

12:03:22 #11 Text 0 File ThreadedTransferInterface.cpp, Line 956
Prepare [E: PHILIPS SPD2414T] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4676845568, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2283616 | 0 | 0x00
2283616 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

12:03:22 #12 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

12:03:22 #13 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

12:03:22 #14 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

12:03:22 #15 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.

12:03:22 #16 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

12:03:22 #17 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 8x (11.080 KB/s)

12:03:22 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:03:22 #19 Text 0 File Cdrdrv.cpp, Line 10187
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC…
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16…783]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 …MCC…004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7…Tl…_…
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 …
01 00 38 38 02 2C 5A 1A - 05 2E 23 10 04 1E 1D 01 …88.,Z…#…
00 00 02 2C 5A 1A 05 2E - 23 10 04 1E 1D 01 00 00 …,Z…#…
02 00 54 70 02 30 63 3C - 24 14 0C 0C 01 20 00 00 …Tp.0c<$…
00 00 02 40 66 42 24 14 - 0C 0C 01 20 00 00 00 2B …@fB$…+
03 00 54 DF 02 30 63 3C - 24 14 0C 0C 01 20 00 00 …T…0c<$…
00 00 02 75 5E 58 24 14 - 0A 0A 01 20 00 00 00 59 …u^X$…Y
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

12:03:22 #20 SPTI -1065 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
CDB Data: 0xDF 00 0F 00 00 01 00 00 00 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x06203240: Len x80

12:03:22 #21 SPTI -1065 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
CDB Data: 0xDF 00 0F 00 00 01 00 00 00 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x06203240: Len x80

12:03:22 #22 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes

12:03:22 #23 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

12:04:26 #24 SPTI -1135 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
CDB Data: 0x2A 00 00 00 37 C0 00 00 20 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x1ac96fc0: Len x10000
0xBF 5C 06 01 63 47 D2 EE 73 90 B7 39 2E E7 38 8F
0x91 1D 2B 1F 17 6D DC 93 9C FB FC 0A 08 3E 12 3E
0x5F C0 87 F8 5F 47 8A A3 FC 08 56 7B 67 EA 62 41

12:04:26 #25 CDR -1135 File Writer.cpp, Line 306
Write error
E: PHILIPS SPD2414T

12:04:27 #26 Phase 127 File dlgbrnst.cpp, Line 1767
Generating DVD high compatibility borders

12:04:36 #27 Text 0 File DVDPlusRW.cpp, Line 943
EndDAO: Last written address 14272

12:04:36 #28 SPTI -1065 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
CDB Data: 0xDF 00 0F 00 00 01 00 00 00 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x06203240: Len x80

12:04:36 #29 SPTI -1065 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
CDB Data: 0xDF 00 0F 00 00 01 00 00 00 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x06203240: Len x80

12:04:36 #30 CDR -1176 File WriterStatus.cpp, Line 292
Session fixation error
E: PHILIPS SPD2414T

12:04:36 #31 TRANSFER -24 File WriterStatus.cpp, Line 292
Could not perform end of Disc-at-once

12:04:36 #32 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 8x (11.080 KB/s)

12:04:36 #33 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

12:04:40 #34 Text 0 File Cdrdrv.cpp, Line 11450
DriveLocker: UnLockVolume completed

12:04:40 #35 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon


#2

Make sure DMA is turned on.


#3

DMA was on all the time.


#4

I would really appreciate at least some kind of diagnosis. I can’t return the drive to the store, so should I just toss it away?

There must be someone who knows what’s going on.