No seek complete error on LG 4167b

Hiya guys - I have recently had an error appear when burning.
Im guessing it coincides with my sister trying to open the dvd drive while it is still burning - using the emergency hole :frowning:
It is a LG HL-DT-ST DVDRAM GSA-4167B

If you need more information - please ask for Nero History etc

Cheers in advance from down under

does anybody have any idea how this would be affected by the emergency release mechanism?

[QUOTE=bandi123;1939989]Hiya guys - I have recently had an error appear when burning.
[B]Im guessing it coincides with my sister trying to open the dvd drive while it is still burning - using the emergency hole :([/B]
It is a LG HL-DT-ST DVDRAM GSA-4167B

If you need more information - please ask for Nero History etc

Cheers in advance from down under[/QUOTE]

Really stupid idea that was…

Please post a log.

[quote=bandi123;1944361]does anybody have any idea how this would be affected by the emergency release mechanism?[/quote]2 of the possibilities:

Somehow, the optical pickup was in just the position to get scraped by the tray going out. Thus, there is some form of physical damage, and the drive can’t seek, can’t focus, or some other issue.

Disc spinning very fast is forced into the tray, thus forcing the spindle servo to slow while still poswered up, burning spindle servo up. The drive can no longer spin discs up to full speed properly.

But if you post the log like [B]chef[/B] suggested, maybe we can see just where it fails. :iagree:

In regards to your “stupid idea” remark, she is just a kid, and doesnt know any better.
Please find the log below.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘F:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 2:54:32 PM

NT-SPTI used
Nero Version: 7.2.7.0
Internal Version: 7, 2, 7, 0
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL11 - HA 1 TA 0 - 7.2.7.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <COMPAQ DVD-ROM GD-5000 >Version: 0210 - HA 1 TA 1 - 7.2.7.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3160811AS atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4167B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : COMPAQ DVD-ROM GD-5000 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
COMPAQ DVD-ROM GD-5000 R: CDRom1
HL-DT-ST DVDRAM GSA-4167B W: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 324MB (332092kB)
Memory in use : 68
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.11.2007
ISO compilation
8:42:25 AM #1 Text 0 File Isodoc.cpp, Line 6440
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

8:42:26 AM #2 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 81920KB of Memory

8:42:26 AM #3 Text 0 File Reader.cpp, Line 124
Reader running

8:42:26 AM #4 Text 0 File Writer.cpp, Line 113
Writer W: HL-DT-ST DVDRAM GSA-4167B running

8:42:26 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

8:42:26 AM #6 Text 0 File Burncd.cpp, Line 3405
Turn on Disc-At-Once, using DVD media

8:42:44 AM #7 Text 0 File DlgWaitCD.cpp, Line 298
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 359135 ( 79:48.35, 701MB)

8:42:44 AM #8 Text 0 File DlgWaitCD.cpp, Line 310
Write in overburning mode: NO (enabled: CD)

8:42:44 AM #9 Text 0 File DlgWaitCD.cpp, Line 2842
Recorder: HL-DT-ST DVDRAM GSA-4167B, Media type: DVD-RW
Disc Manufacturer: CMCW03 -
Disc Application Code: 2, Disc Physical Code: 214

8:42:44 AM #10 Text 0 File DlgWaitCD.cpp, Line 482
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: DVD-RW. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)
This disc is not empty.
(Medium in drive: DVD-RW. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)
VMS. Disc was erased successfully.
Accessing disc…
(Medium in drive: DVD-RW. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)

8:42:44 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 848
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 359136 (359136) = #359136/79:48.36
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 359136 blocks [W: HL-DT-ST DVDRAM GSA-4167B]
--------------------------------------------------------------

8:42:44 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1063
Prepare recorder [W: HL-DT-ST DVDRAM GSA-4167B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 735510528, ISRC ""
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 359136 | 0 | 0x00
0 | 1 | 1 | 0x41 | 359136 | 0 | 0x00
359136 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

8:42:45 AM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

8:42:45 AM #14 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

8:42:45 AM #15 Text 0 File Burncd.cpp, Line 4236
Cache writing successful.

8:42:45 AM #16 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

8:42:45 AM #17 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)

8:42:45 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2722
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:42:45 AM #19 Text 0 File DVDR.cpp, Line 2965
Recording mode: Restricted Overwrite Mode

8:42:45 AM #20 Text 0 File DVDR.cpp, Line 3121
Start write address at LBA 0
DVD high compatibility mode: Yes

8:42:45 AM #21 Text 0 File Cdrdrv.cpp, Line 9096
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Extended Part Version: 1.2 (18)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 20 10 00 00 00 00 00 - 00 00 03 12 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

8:45:00 AM #22 Text 0 File WriterStatus.cpp, Line 116
<W: HL-DT-ST DVDRAM GSA-4167B> start writing Lead-Out at LBA 359136 (57AE0h), length 0 blocks

8:45:00 AM #23 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

8:45:01 AM #24 Text 0 File DVDR.cpp, Line 3337
EndDAO: Last written address was 359135

8:45:03 AM #25 Phase 133 File dlgbrnst.cpp, Line 1730
Writing short lead-out

8:45:39 AM #26 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 4x (5,540 KB/s)

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.32a, size=20640 bytes, created 25/4/2005 8:03:00 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\InCDfs.SYS’: Ver=5, 1, 0, 15, size=102912 bytes, created 22/8/2006 11:40:46 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=5, 1, 0, 15, size=29568 bytes, created 22/8/2006 11:41:04 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=5, 1, 0, 15, size=9984 bytes, created 22/8/2006 11:41:20 AM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
David Clements

1C82-0000-19E5-MAAX-4003-8591-****

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘F:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 2:54:32 PM

NT-SPTI used
Nero Version: 7.2.7.0
Internal Version: 7, 2, 7, 0
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL11 - HA 1 TA 0 - 7.2.7.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <COMPAQ DVD-ROM GD-5000 >Version: 0210 - HA 1 TA 1 - 7.2.7.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3160811AS atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4167B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : COMPAQ DVD-ROM GD-5000 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
COMPAQ DVD-ROM GD-5000 R: CDRom1
HL-DT-ST DVDRAM GSA-4167B W: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 382MB (391544kB)
Memory in use : 62
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.11.2007
ISO compilation
9:01:02 AM #1 Text 0 File Isodoc.cpp, Line 6440
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

9:01:03 AM #2 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 81920KB of Memory

9:01:03 AM #3 Text 0 File Reader.cpp, Line 124
Reader running

9:01:03 AM #4 Text 0 File Writer.cpp, Line 113
Writer W: HL-DT-ST DVDRAM GSA-4167B running

9:01:03 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

9:01:03 AM #6 Text 0 File Burncd.cpp, Line 3405
Turn on Disc-At-Once, using DVD media

9:07:03 AM #7 Text 0 File DlgWaitCD.cpp, Line 298
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 359135 ( 79:48.35, 701MB)

9:07:03 AM #8 Text 0 File DlgWaitCD.cpp, Line 310
Write in overburning mode: NO (enabled: CD)

9:07:03 AM #9 Text 0 File DlgWaitCD.cpp, Line 2842
Recorder: HL-DT-ST DVDRAM GSA-4167B, Media type: DVD-RW
Disc Manufacturer: CMCW03 -
Disc Application Code: 2, Disc Physical Code: 214

9:07:03 AM #10 Text 0 File DlgWaitCD.cpp, Line 482
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: DVD-RW. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)
This disc is not empty.
(Medium in drive: DVD-RW. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)
VMS. Disc was erased successfully.
Accessing disc…
(Medium in drive: DVD-RW. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)

9:07:03 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 848
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 359136 (359136) = #359136/79:48.36
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 359136 blocks [W: HL-DT-ST DVDRAM GSA-4167B]
--------------------------------------------------------------

9:07:03 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1063
Prepare recorder [W: HL-DT-ST DVDRAM GSA-4167B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 735510528, ISRC ""
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 359136 | 0 | 0x00
0 | 1 | 1 | 0x41 | 359136 | 0 | 0x00
359136 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

9:07:03 AM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

9:07:04 AM #14 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

9:07:04 AM #15 Text 0 File Burncd.cpp, Line 4236
Cache writing successful.

9:07:04 AM #16 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

9:07:04 AM #17 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)

9:07:04 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2722
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:07:04 AM #19 Text 0 File DVDR.cpp, Line 2965
Recording mode: Restricted Overwrite Mode

9:07:04 AM #20 Text 0 File DVDR.cpp, Line 3121
Start write address at LBA 0
DVD high compatibility mode: Yes

9:07:04 AM #21 Text 0 File Cdrdrv.cpp, Line 9096
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Extended Part Version: 1.2 (18)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 20 10 00 00 00 00 00 - 00 00 03 12 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

9:09:20 AM #22 Text 0 File WriterStatus.cpp, Line 116
<W: HL-DT-ST DVDRAM GSA-4167B> start writing Lead-Out at LBA 359136 (57AE0h), length 0 blocks

9:09:20 AM #23 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

9:09:20 AM #24 Text 0 File DVDR.cpp, Line 3337
EndDAO: Last written address was 359135

9:09:22 AM #25 Phase 133 File dlgbrnst.cpp, Line 1730
Writing short lead-out

9:09:58 AM #26 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 4x (5,540 KB/s)

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.32a, size=20640 bytes, created 25/4/2005 8:03:00 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\InCDfs.SYS’: Ver=5, 1, 0, 15, size=102912 bytes, created 22/8/2006 11:40:46 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=5, 1, 0, 15, size=29568 bytes, created 22/8/2006 11:41:04 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=5, 1, 0, 15, size=9984 bytes, created 22/8/2006 11:41:20 AM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
David Clements

1C82-0000-19E5-MAAX-4003-8591-****

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘F:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 2:54:32 PM

NT-SPTI used
Nero Version: 7.2.7.0
Internal Version: 7, 2, 7, 0
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL11 - HA 1 TA 0 - 7.2.7.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <COMPAQ DVD-ROM GD-5000 >Version: 0210 - HA 1 TA 1 - 7.2.7.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3160811AS atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4167B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : COMPAQ DVD-ROM GD-5000 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
COMPAQ DVD-ROM GD-5000 R: CDRom1
HL-DT-ST DVDRAM GSA-4167B W: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 323MB (330952kB)
Memory in use : 68
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.11.2007
ISO compilation
4:42:34 PM #1 Text 0 File Isodoc.cpp, Line 6440
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

4:42:34 PM #2 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 81920KB of Memory

4:42:34 PM #3 Text 0 File Reader.cpp, Line 124
Reader running

4:42:34 PM #4 Text 0 File Writer.cpp, Line 113
Writer W: HL-DT-ST DVDRAM GSA-4167B running

4:42:34 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

4:42:34 PM #6 Text 0 File Burncd.cpp, Line 3405
Turn on Disc-At-Once, using DVD media

4:42:54 PM #7 Text 0 File DlgWaitCD.cpp, Line 298
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 179439 ( 39:52.39, 350MB)

4:42:54 PM #8 Text 0 File DlgWaitCD.cpp, Line 310
Write in overburning mode: NO (enabled: CD)

4:42:54 PM #9 Text 0 File DlgWaitCD.cpp, Line 2842
Recorder: HL-DT-ST DVDRAM GSA-4167B, Media type: DVD-RW
Disc Manufacturer: CMCW03 -
Disc Application Code: 2, Disc Physical Code: 214

4:42:54 PM #10 Text 0 File DlgWaitCD.cpp, Line 482
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: DVD-RW. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)
This disc is not empty.
(Medium in drive: DVD-RW. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)
VMS. Disc was erased successfully.
Accessing disc…
(Medium in drive: DVD-RW. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)

4:42:54 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 848
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 179440 (179440) = #179440/39:52.40
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 179440 blocks [W: HL-DT-ST DVDRAM GSA-4167B]
--------------------------------------------------------------

4:42:54 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1063
Prepare recorder [W: HL-DT-ST DVDRAM GSA-4167B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 367493120, ISRC ""
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 179440 | 0 | 0x00
0 | 1 | 1 | 0x41 | 179440 | 0 | 0x00
179440 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

4:42:55 PM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

4:42:56 PM #14 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

4:42:56 PM #15 Text 0 File Burncd.cpp, Line 4236
Cache writing successful.

4:42:56 PM #16 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

4:42:56 PM #17 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)

4:42:56 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2722
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:42:56 PM #19 Text 0 File DVDR.cpp, Line 2965
Recording mode: Restricted Overwrite Mode

4:42:56 PM #20 Text 0 File DVDR.cpp, Line 3121
Start write address at LBA 0
DVD high compatibility mode: Yes

4:42:56 PM #21 Text 0 File Cdrdrv.cpp, Line 9096
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Extended Part Version: 1.2 (18)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 20 10 00 00 00 00 00 - 00 00 03 12 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

4:44:06 PM #22 Text 0 File WriterStatus.cpp, Line 116
<W: HL-DT-ST DVDRAM GSA-4167B> start writing Lead-Out at LBA 179440 (2BCF0h), length 0 blocks

4:44:06 PM #23 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

4:44:06 PM #24 Text 0 File DVDR.cpp, Line 3337
EndDAO: Last written address was 179439

4:44:08 PM #25 Phase 133 File dlgbrnst.cpp, Line 1730
Writing short lead-out

4:44:42 PM #26 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 4x (5,540 KB/s)

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.32a, size=20640 bytes, created 25/4/2005 8:03:00 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\InCDfs.SYS’: Ver=5, 1, 0, 15, size=102912 bytes, created 22/8/2006 11:40:46 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=5, 1, 0, 15, size=29568 bytes, created 22/8/2006 11:41:04 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=5, 1, 0, 15, size=9984 bytes, created 22/8/2006 11:41:20 AM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
David Clements

1C82-0000-19E5-MAAX-4003-8591-****

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘F:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 2:54:32 PM

NT-SPTI used
Nero Version: 7.2.7.0
Internal Version: 7, 2, 7, 0
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL11 - HA 1 TA 0 - 7.2.7.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <COMPAQ DVD-ROM GD-5000 >Version: 0210 - HA 1 TA 1 - 7.2.7.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3160811AS atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4167B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : COMPAQ DVD-ROM GD-5000 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
COMPAQ DVD-ROM GD-5000 R: CDRom1
HL-DT-ST DVDRAM GSA-4167B W: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 359MB (368240kB)
Memory in use : 64
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.11.2007
ISO compilation
7:52:02 AM #1 Text 0 File Isodoc.cpp, Line 6440
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

7:52:02 AM #2 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 81920KB of Memory

7:52:02 AM #3 Text 0 File Reader.cpp, Line 124
Reader running

7:52:02 AM #4 Text 0 File Writer.cpp, Line 113
Writer W: HL-DT-ST DVDRAM GSA-4167B running

7:52:02 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

7:52:02 AM #6 Text 0 File Burncd.cpp, Line 3405
Turn on Disc-At-Once, using DVD media

7:52:22 AM #7 Text 0 File DlgWaitCD.cpp, Line 298
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 358383 ( 79:38.33, 699MB)

7:52:22 AM #8 Text 0 File DlgWaitCD.cpp, Line 310
Write in overburning mode: NO (enabled: CD)

7:52:22 AM #9 Text 0 File DlgWaitCD.cpp, Line 2842
Recorder: HL-DT-ST DVDRAM GSA-4167B, Media type: DVD-RW
Disc Manufacturer: CMCW03 -
Disc Application Code: 2, Disc Physical Code: 214

7:52:22 AM #10 Text 0 File DlgWaitCD.cpp, Line 482
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: DVD-RW. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)
This disc is not empty.
(Medium in drive: DVD-RW. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)
VMS. Disc was erased successfully.
Accessing disc…
(Medium in drive: DVD-RW. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)

7:52:22 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 848
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 358384 (358384) = #358384/79:38.34
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358384 blocks [W: HL-DT-ST DVDRAM GSA-4167B]
--------------------------------------------------------------

7:52:22 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1063
Prepare recorder [W: HL-DT-ST DVDRAM GSA-4167B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 733970432, ISRC ""
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 358384 | 0 | 0x00
0 | 1 | 1 | 0x41 | 358384 | 0 | 0x00
358384 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

7:52:23 AM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

7:52:23 AM #14 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

7:52:23 AM #15 Text 0 File Burncd.cpp, Line 4236
Cache writing successful.

7:52:23 AM #16 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

7:52:23 AM #17 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)

7:52:23 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2722
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

7:52:23 AM #19 Text 0 File DVDR.cpp, Line 2965
Recording mode: Restricted Overwrite Mode

7:52:23 AM #20 Text 0 File DVDR.cpp, Line 3121
Start write address at LBA 0
DVD high compatibility mode: Yes

7:52:24 AM #21 Text 0 File Cdrdrv.cpp, Line 9096
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Extended Part Version: 1.2 (18)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 20 10 00 00 00 00 00 - 00 00 03 12 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

7:54:39 AM #22 Text 0 File WriterStatus.cpp, Line 116
<W: HL-DT-ST DVDRAM GSA-4167B> start writing Lead-Out at LBA 358384 (577F0h), length 0 blocks

7:54:39 AM #23 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

7:54:39 AM #24 Text 0 File DVDR.cpp, Line 3337
EndDAO: Last written address was 358383

7:54:41 AM #25 Phase 133 File dlgbrnst.cpp, Line 1730
Writing short lead-out

7:55:17 AM #26 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 4x (5,540 KB/s)

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.32a, size=20640 bytes, created 25/4/2005 8:03:00 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\InCDfs.SYS’: Ver=5, 1, 0, 15, size=102912 bytes, created 22/8/2006 11:40:46 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=5, 1, 0, 15, size=29568 bytes, created 22/8/2006 11:41:04 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=5, 1, 0, 15, size=9984 bytes, created 22/8/2006 11:41:20 AM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
David Clements

1C82-0000-19E5-MAAX-4003-8591-****

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘F:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 2:54:32 PM

NT-SPTI used
Nero Version: 7.2.7.0
Internal Version: 7, 2, 7, 0
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL11 - HA 1 TA 0 - 7.2.7.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <COMPAQ DVD-ROM GD-5000 >Version: 0210 - HA 1 TA 1 - 7.2.7.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3160811AS atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4167B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : COMPAQ DVD-ROM GD-5000 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
COMPAQ DVD-ROM GD-5000 R: CDRom1
HL-DT-ST DVDRAM GSA-4167B W: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 309MB (317268kB)
Memory in use : 69
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.11.2007
ISO compilation
10:18:39 AM #1 Text 0 File Isodoc.cpp, Line 6440
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:18:39 AM #2 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 81920KB of Memory

10:18:39 AM #3 Text 0 File Reader.cpp, Line 124
Reader running

10:18:39 AM #4 Text 0 File Writer.cpp, Line 113
Writer W: HL-DT-ST DVDRAM GSA-4167B running

10:18:39 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

10:18:39 AM #6 Text 0 File Burncd.cpp, Line 3405
Turn on Disc-At-Once, using DVD media

10:18:55 AM #7 Text 0 File DlgWaitCD.cpp, Line 298
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 361391 ( 80:18.41, 705MB)

10:18:55 AM #8 Text 0 File DlgWaitCD.cpp, Line 310
Write in overburning mode: NO (enabled: CD)

10:18:55 AM #9 Text 0 File DlgWaitCD.cpp, Line 2842
Recorder: HL-DT-ST DVDRAM GSA-4167B, Media type: DVD-RW
Disc Manufacturer: CMCW03 -
Disc Application Code: 2, Disc Physical Code: 214

10:18:55 AM #10 Text 0 File DlgWaitCD.cpp, Line 482
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: DVD-RW. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)
This disc is not empty.
(Medium in drive: DVD-RW. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)
VMS. Disc was erased successfully.
Accessing disc…
(Medium in drive: DVD-RW. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)

10:18:55 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 848
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 361392 (361392) = #361392/80:18.42
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 361392 blocks [W: HL-DT-ST DVDRAM GSA-4167B]
--------------------------------------------------------------

10:18:55 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1063
Prepare recorder [W: HL-DT-ST DVDRAM GSA-4167B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 740130816, ISRC ""
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 361392 | 0 | 0x00
0 | 1 | 1 | 0x41 | 361392 | 0 | 0x00
361392 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

10:18:56 AM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

10:18:56 AM #14 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

10:18:56 AM #15 Text 0 File Burncd.cpp, Line 4236
Cache writing successful.

10:18:56 AM #16 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

10:18:56 AM #17 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)

10:18:56 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2722
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:18:56 AM #19 Text 0 File DVDR.cpp, Line 2965
Recording mode: Restricted Overwrite Mode

10:18:56 AM #20 Text 0 File DVDR.cpp, Line 3121
Start write address at LBA 0
DVD high compatibility mode: Yes

10:18:56 AM #21 Text 0 File Cdrdrv.cpp, Line 9096
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Extended Part Version: 1.2 (18)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 20 10 00 00 00 00 00 - 00 00 03 12 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

10:21:14 AM #22 Text 0 File WriterStatus.cpp, Line 116
<W: HL-DT-ST DVDRAM GSA-4167B> start writing Lead-Out at LBA 361392 (583B0h), length 0 blocks

10:21:14 AM #23 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

10:21:14 AM #24 Text 0 File DVDR.cpp, Line 3337
EndDAO: Last written address was 361391

10:21:17 AM #25 Phase 133 File dlgbrnst.cpp, Line 1730
Writing short lead-out

10:21:53 AM #26 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 4x (5,540 KB/s)

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.32a, size=20640 bytes, created 25/4/2005 8:03:00 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\InCDfs.SYS’: Ver=5, 1, 0, 15, size=102912 bytes, created 22/8/2006 11:40:46 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=5, 1, 0, 15, size=29568 bytes, created 22/8/2006 11:41:04 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=5, 1, 0, 15, size=9984 bytes, created 22/8/2006 11:41:20 AM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
David Clements

1C82-0000-19E5-MAAX-4003-8591-****

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘F:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 2:54:32 PM

NT-SPTI used
Nero Version: 7.2.7.0
Internal Version: 7, 2, 7, 0
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL11 - HA 1 TA 0 - 7.2.7.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <COMPAQ DVD-ROM GD-5000 >Version: 0210 - HA 1 TA 1 - 7.2.7.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3160811AS atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4167B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : COMPAQ DVD-ROM GD-5000 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
COMPAQ DVD-ROM GD-5000 R: CDRom1
HL-DT-ST DVDRAM GSA-4167B W: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 434MB (445252kB)
Memory in use : 57
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.11.2007
ISO compilation
10:52:43 AM #1 Text 0 File Isodoc.cpp, Line 6440
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:52:43 AM #2 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 81920KB of Memory

10:52:43 AM #3 Text 0 File Reader.cpp, Line 124
Reader running

10:52:43 AM #4 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

10:52:43 AM #5 Text 0 File Burncd.cpp, Line 3405
Turn on Disc-At-Once, using DVD media

10:52:44 AM #6 Text 0 File DlgWaitCD.cpp, Line 298
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 298111 ( 66:14.61, 582MB)

10:52:44 AM #7 Text 0 File DlgWaitCD.cpp, Line 310
Write in overburning mode: NO (enabled: CD)

10:52:44 AM #8 Text 0 File DlgWaitCD.cpp, Line 2842
Recorder: HL-DT-ST DVDRAM GSA-4167B, Media type: DVD-RW
Disc Manufacturer: CMCW03 -
Disc Application Code: 2, Disc Physical Code: 214

10:52:44 AM #9 Text 0 File DlgWaitCD.cpp, Line 482
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:52:44 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 848
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 298112 (298112) = #298112/66:14.62
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 298112 blocks [W: HL-DT-ST DVDRAM GSA-4167B]
--------------------------------------------------------------

10:52:44 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1063
Prepare recorder [W: HL-DT-ST DVDRAM GSA-4167B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 610533376, ISRC ""
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 298112 | 0 | 0x00
0 | 1 | 1 | 0x41 | 298112 | 0 | 0x00
298112 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

10:52:44 AM #12 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

10:52:44 AM #13 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

10:52:45 AM #14 Text 0 File Burncd.cpp, Line 4236
Cache writing successful.

10:52:45 AM #15 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

10:52:45 AM #16 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)

10:52:45 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2722
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:52:45 AM #18 Text 0 File DVDMinusRW.cpp, Line 260
Perform ‘Quick Format’ (type 15h) to set disc in ‘Restricted Overwrite Mode’.

10:52:45 AM #19 Phase 136 File dlgbrnst.cpp, Line 1730
Quick Format DVD-RW

10:56:48 AM #20 SPTI -1169 File SCSIPassThrough.cpp, Line 291
W: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 10 00 00 00 0D 04 04 00 80

10:56:48 AM #21 CDR -1169 File ThreadedTransferInterface.cpp, Line 1805
Logical unit not ready, operation in progress
W: HL-DT-ST DVDRAM GSA-4167B

10:56:48 AM #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1805
Could not perform start of Disc-at-once

10:56:48 AM #23 SPTI -1169 File SCSIPassThrough.cpp, Line 291
W: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 10 00 00 00 0D 04 04 00 80
Buffer x05054800: Len x48

10:56:48 AM #24 SPTI -1169 File SCSIPassThrough.cpp, Line 291
W: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 10 00 00 00 0D 04 04 00 80
Buffer x05054800: Len x48

10:56:49 AM #25 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (5,540 KB/s)

10:56:49 AM #26 SPTI -1169 File SCSIPassThrough.cpp, Line 291
W: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 10 00 00 00 0D 04 04 00 80

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.32a, size=20640 bytes, created 25/4/2005 8:03:00 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\InCDfs.SYS’: Ver=5, 1, 0, 15, size=102912 bytes, created 22/8/2006 11:40:46 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=5, 1, 0, 15, size=29568 bytes, created 22/8/2006 11:41:04 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=5, 1, 0, 15, size=9984 bytes, created 22/8/2006 11:41:20 AM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
David Clements

1C82-0000-19E5-MAAX-4003-8591-****

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘F:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 2:54:32 PM

NT-SPTI used
Nero Version: 7.2.7.0
Internal Version: 7, 2, 7, 0
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL11 - HA 1 TA 0 - 7.2.7.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <COMPAQ DVD-ROM GD-5000 >Version: 0210 - HA 1 TA 1 - 7.2.7.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3160811AS atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4167B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : COMPAQ DVD-ROM GD-5000 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
COMPAQ DVD-ROM GD-5000 R: CDRom1
HL-DT-ST DVDRAM GSA-4167B W: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 285MB (292616kB)
Memory in use : 72
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.11.2007
ISO compilation
11:01:59 AM #1 Text 0 File Isodoc.cpp, Line 6440
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Continue multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:01:59 AM #2 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 81920KB of Memory

11:01:59 AM #3 Text 0 File Reader.cpp, Line 124
Reader running

11:01:59 AM #4 Text 0 File Writer.cpp, Line 113
Writer W: HL-DT-ST DVDRAM GSA-4167B running

11:01:59 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

11:01:59 AM #6 Text 0 File Burncd.cpp, Line 3405
Turn on Disc-At-Once, using DVD media

11:02:00 AM #7 Text 0 File DlgWaitCD.cpp, Line 298
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 656515 (145:53.40, 1282MB)

11:02:00 AM #8 Text 0 File DlgWaitCD.cpp, Line 310
Write in overburning mode: NO (enabled: CD)

11:02:00 AM #9 Text 0 File DlgWaitCD.cpp, Line 2842
Recorder: HL-DT-ST DVDRAM GSA-4167B, Media type: DVD-RW
Disc Manufacturer: CMCW03 -
Disc Application Code: 2, Disc Physical Code: 214

11:02:00 AM #10 Text 0 File DlgWaitCD.cpp, Line 482
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:02:00 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 848
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 298128 (298128) = #298128/66:15.3
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 298128 blocks [W: HL-DT-ST DVDRAM GSA-4167B]
1: TRM_DATA_MODE1 ()
2 indices, index0 (0) not provided
original disc pos #15 + 4 (4) = #19/0:0.19
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4 blocks [W: HL-DT-ST DVDRAM GSA-4167B]
--------------------------------------------------------------

11:02:00 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1063
Prepare recorder [W: HL-DT-ST DVDRAM GSA-4167B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 2: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 610566144, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos 610566144 610566144 610574336, ISRC ""
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
358384 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
358384 | 1 | 0 | 0x41 | 298128 | 358384 | 0x00
358384 | 1 | 1 | 0x41 | 298128 | 358384 | 0x00
656512 | 2 | 0 | 0x41 | 4 | 656512 | 0x00
656512 | 2 | 1 | 0x41 | 4 | 656512 | 0x00
656516 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

11:02:01 AM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

11:02:01 AM #14 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

11:02:01 AM #15 Text 0 File Burncd.cpp, Line 4236
Cache writing successful.

11:02:01 AM #16 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

11:02:01 AM #17 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)

11:02:01 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2722
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #358384

11:02:01 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2722
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #15): write at #15

11:02:01 AM #20 Text 0 File DVDR.cpp, Line 2965
Recording mode: Restricted Overwrite Mode

11:02:01 AM #21 Phase 134 File dlgbrnst.cpp, Line 1730
Quick Grow last Border

11:02:14 AM #22 Phase 65 File dlgbrnst.cpp, Line 1730
Burn process started

11:02:14 AM #23 Text 0 File DVDR.cpp, Line 3121
Start write address at LBA 358384
DVD high compatibility mode: Yes

11:02:14 AM #24 Text 0 File Cdrdrv.cpp, Line 9096
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Extended Part Version: 1.2 (18)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 20 10 00 00 00 00 00 - 00 00 03 12 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

11:04:48 AM #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

11:04:50 AM #26 Text 0 File WriterStatus.cpp, Line 116
<W: HL-DT-ST DVDRAM GSA-4167B> start writing Lead-Out at LBA 358388 (577F4h), length 0 blocks

11:04:54 AM #27 SPTI -1128 File SCSIPassThrough.cpp, Line 291
W: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0xF0 00 03 00 00 00 00 10 00 00 03 0D 11
Buffer x0510a200: Len x10000

11:04:54 AM #28 CDR -1128 File Writer.cpp, Line 302
Unrecoverable read error
W: HL-DT-ST DVDRAM GSA-4167B

11:04:54 AM #29 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

11:04:54 AM #30 Text 0 File DVDR.cpp, Line 3337
EndDAO: Last written address was 14

11:04:55 AM #31 Phase 133 File dlgbrnst.cpp, Line 1730
Writing short lead-out

11:05:37 AM #32 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (5,540 KB/s)

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.32a, size=20640 bytes, created 25/4/2005 8:03:00 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\InCDfs.SYS’: Ver=5, 1, 0, 15, size=102912 bytes, created 22/8/2006 11:40:46 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=5, 1, 0, 15, size=29568 bytes, created 22/8/2006 11:41:04 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=5, 1, 0, 15, size=9984 bytes, created 22/8/2006 11:41:20 AM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
David Clements

1C82-0000-19E5-MAAX-4003-8591-****

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘F:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 2:54:32 PM

NT-SPTI used
Nero Version: 7.2.7.0
Internal Version: 7, 2, 7, 0
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL11 - HA 1 TA 0 - 7.2.7.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <COMPAQ DVD-ROM GD-5000 >Version: 0210 - HA 1 TA 1 - 7.2.7.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3160811AS atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4167B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : COMPAQ DVD-ROM GD-5000 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
COMPAQ DVD-ROM GD-5000 R: CDRom1
HL-DT-ST DVDRAM GSA-4167B W: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 516MB (528988kB)
Memory in use : 49
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.11.2007
ISO compilation
11:20:42 AM #1 Text 0 File Isodoc.cpp, Line 6440
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:20:43 AM #2 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 81920KB of Memory

11:20:43 AM #3 Text 0 File Reader.cpp, Line 124
Reader running

11:20:43 AM #4 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

11:20:43 AM #5 Text 0 File Burncd.cpp, Line 3405
Turn on Disc-At-Once, using DVD media

11:20:44 AM #6 Text 0 File DlgWaitCD.cpp, Line 298
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 390623 ( 86:48.23, 762MB)

11:20:44 AM #7 Text 0 File DlgWaitCD.cpp, Line 310
Write in overburning mode: NO (enabled: CD)

11:20:44 AM #8 Text 0 File DlgWaitCD.cpp, Line 2842
Recorder: HL-DT-ST DVDRAM GSA-4167B, Media type: DVD-RW
Disc Manufacturer: CMCW03 -
Disc Application Code: 2, Disc Physical Code: 214

11:20:44 AM #9 Text 0 File DlgWaitCD.cpp, Line 482
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:20:44 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 848
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 390624 (390624) = #390624/86:48.24
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 390624 blocks [W: HL-DT-ST DVDRAM GSA-4167B]
--------------------------------------------------------------

11:20:44 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1063
Prepare recorder [W: HL-DT-ST DVDRAM GSA-4167B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 799997952, ISRC ""
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 390624 | 0 | 0x00
0 | 1 | 1 | 0x41 | 390624 | 0 | 0x00
390624 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

11:20:44 AM #12 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

11:20:45 AM #13 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

11:20:45 AM #14 Text 0 File Burncd.cpp, Line 4236
Cache writing successful.

11:20:45 AM #15 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

11:20:45 AM #16 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)

11:20:45 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2722
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:20:45 AM #18 Text 0 File DVDMinusRW.cpp, Line 260
Perform ‘Quick Format’ (type 15h) to set disc in ‘Restricted Overwrite Mode’.

11:20:45 AM #19 Phase 136 File dlgbrnst.cpp, Line 1730
Quick Format DVD-RW

11:24:47 AM #20 SPTI -1169 File SCSIPassThrough.cpp, Line 291
W: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 10 00 00 00 0D 04 04 00 80

11:24:47 AM #21 CDR -1169 File ThreadedTransferInterface.cpp, Line 1805
Logical unit not ready, operation in progress
W: HL-DT-ST DVDRAM GSA-4167B

11:24:47 AM #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1805
Could not perform start of Disc-at-once

11:24:47 AM #23 SPTI -1169 File SCSIPassThrough.cpp, Line 291
W: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 10 00 00 00 0D 04 04 00 80
Buffer x0397aa00: Len x48

11:24:48 AM #24 SPTI -1169 File SCSIPassThrough.cpp, Line 291
W: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 10 00 00 00 0D 04 04 00 80
Buffer x0397aa00: Len x48

11:24:48 AM #25 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (5,540 KB/s)

11:24:48 AM #26 SPTI -1169 File SCSIPassThrough.cpp, Line 291
W: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 10 00 00 00 0D 04 04 00 80

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.32a, size=20640 bytes, created 25/4/2005 8:03:00 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\InCDfs.SYS’: Ver=5, 1, 0, 15, size=102912 bytes, created 22/8/2006 11:40:46 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=5, 1, 0, 15, size=29568 bytes, created 22/8/2006 11:41:04 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=5, 1, 0, 15, size=9984 bytes, created 22/8/2006 11:41:20 AM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
David Clements

1C82-0000-19E5-MAAX-4003-8591-****

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘F:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 2:54:32 PM

NT-SPTI used
Nero Version: 7.2.7.0
Internal Version: 7, 2, 7, 0
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL11 - HA 1 TA 0 - 7.2.7.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <COMPAQ DVD-ROM GD-5000 >Version: 0210 - HA 1 TA 1 - 7.2.7.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3160811AS atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4167B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : COMPAQ DVD-ROM GD-5000 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
COMPAQ DVD-ROM GD-5000 R: CDRom1
HL-DT-ST DVDRAM GSA-4167B W: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 551MB (565148kB)
Memory in use : 46
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.11.2007
CD-ROM (ISO)
2:51:47 PM #1 Text 0 File Isodoc.cpp, Line 6440
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : TRUE
Multisession type: : Continue multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

2:51:47 PM #2 Text 0 File Burncd.cpp, Line 3091
HL-DT-ST DVDRAM GSA-4167B
Buffer underrun protection activated

2:51:47 PM #3 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 81920KB of Memory

2:51:47 PM #4 Text 0 File Reader.cpp, Line 124
Reader running

2:51:47 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

2:51:47 PM #6 Text 0 File Burncd.cpp, Line 3405
Turn on Track-At-Once, using CD-R/RW media

2:51:52 PM #7 Phase 40 File dlgbrnst.cpp, Line 1730
Aborted by user

2:51:52 PM #8 Text 0 File DlgWaitCD.cpp, Line 298
Disc check failed: Initializing Disc Info

2:51:52 PM #9 Text 0 File DlgWaitCD.cpp, Line 310
Write in overburning mode: NO (enabled: CD)

2:51:52 PM #10 Text 0 File DlgWaitCD.cpp, Line 2842
Recorder: HL-DT-ST DVDRAM GSA-4167B
Medium not present

2:51:52 PM #11 Text 0 File DlgWaitCD.cpp, Line 482
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Reading of disc information failed.
(Medium in drive: DVD-RW. Medium required by compilation: CD-R/RW.)

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.32a, size=20640 bytes, created 25/4/2005 8:03:00 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\InCDfs.SYS’: Ver=5, 1, 0, 15, size=102912 bytes, created 22/8/2006 11:40:46 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=5, 1, 0, 15, size=29568 bytes, created 22/8/2006 11:41:04 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=5, 1, 0, 15, size=9984 bytes, created 22/8/2006 11:41:20 AM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
David Clements

1C82-0000-19E5-MAAX-4003-8591-****

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘F:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 2:54:32 PM

NT-SPTI used
Nero Version: 7.2.7.0
Internal Version: 7, 2, 7, 0
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL11 - HA 1 TA 0 - 7.2.7.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <COMPAQ DVD-ROM GD-5000 >Version: 0210 - HA 1 TA 1 - 7.2.7.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3160811AS atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4167B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : COMPAQ DVD-ROM GD-5000 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
COMPAQ DVD-ROM GD-5000 R: CDRom1
HL-DT-ST DVDRAM GSA-4167B W: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 478MB (490404kB)
Memory in use : 53
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.11.2007
ISO compilation
2:52:27 PM #1 Text 0 File Isodoc.cpp, Line 6440
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

2:52:27 PM #2 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 81920KB of Memory

2:52:27 PM #3 Text 0 File Reader.cpp, Line 124
Reader running

2:52:27 PM #4 Text 0 File Writer.cpp, Line 113
Writer W: HL-DT-ST DVDRAM GSA-4167B running

2:52:27 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

2:52:27 PM #6 Text 0 File Burncd.cpp, Line 3405
Turn on Disc-At-Once, using DVD media

2:54:05 PM #7 Text 0 File DlgWaitCD.cpp, Line 298
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 358447 ( 79:39.22, 700MB)

2:54:05 PM #8 Text 0 File DlgWaitCD.cpp, Line 310
Write in overburning mode: NO (enabled: CD)

2:54:05 PM #9 Text 0 File DlgWaitCD.cpp, Line 2842
Recorder: HL-DT-ST DVDRAM GSA-4167B, Media type: DVD-RW
Disc Manufacturer: CMCW03 -
Disc Application Code: 2, Disc Physical Code: 214

2:54:05 PM #10 Text 0 File DlgWaitCD.cpp, Line 482
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: DVD-RW. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)
This disc is not empty.
(Medium in drive: DVD-RW. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)
VMS. Disc was erased successfully.
Accessing disc…
(Medium in drive: DVD-RW. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)

2:54:05 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 848
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 358448 (358448) = #358448/79:39.23
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358448 blocks [W: HL-DT-ST DVDRAM GSA-4167B]
--------------------------------------------------------------

2:54:05 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1063
Prepare recorder [W: HL-DT-ST DVDRAM GSA-4167B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 734101504, ISRC ""
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 358448 | 0 | 0x00
0 | 1 | 1 | 0x41 | 358448 | 0 | 0x00
358448 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

2:54:05 PM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

2:54:06 PM #14 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

2:54:06 PM #15 Text 0 File Burncd.cpp, Line 4236
Cache writing successful.

2:54:06 PM #16 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

2:54:06 PM #17 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)

2:54:06 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2722
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

2:54:06 PM #19 Text 0 File DVDR.cpp, Line 2965
Recording mode: Restricted Overwrite Mode

2:54:06 PM #20 Text 0 File DVDR.cpp, Line 3121
Start write address at LBA 0
DVD high compatibility mode: Yes

2:54:06 PM #21 Text 0 File Cdrdrv.cpp, Line 9096
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Extended Part Version: 1.2 (18)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 20 10 00 00 00 00 00 - 00 00 03 12 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

2:55:55 PM #22 SPTI -1093 File SCSIPassThrough.cpp, Line 291
W: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 00 00 03 41 E0 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 37 20 00 0D 02
Buffer x060a0000: Len x10000
0x26 CC AC 44 4A EC 87 06 97 B1 55 CA DD 3A 14 E9
0x54 9D 48 6E F6 A2 B2 D4 E2 BF F3 6D BE 59 FE 9C
0x1D 81 95 7D 4D 0C 0E 5C 4E 08 68 48 64 C6 3D BD

2:55:55 PM #23 CDR -1093 File Writer.cpp, Line 302
No seek complete
W: HL-DT-ST DVDRAM GSA-4167B

2:55:55 PM #24 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

2:55:55 PM #25 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

2:55:56 PM #26 Text 0 File DVDR.cpp, Line 3337
EndDAO: Last written address was 213471

2:55:56 PM #27 Phase 133 File dlgbrnst.cpp, Line 1730
Writing short lead-out

2:56:32 PM #28 CDR -1093 File WriterStatus.cpp, Line 167
No seek complete
W: HL-DT-ST DVDRAM GSA-4167B

2:56:32 PM #29 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

2:56:32 PM #30 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (5,540 KB/s)

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.32a, size=20640 bytes, created 25/4/2005 8:03:00 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\InCDfs.SYS’: Ver=5, 1, 0, 15, size=102912 bytes, created 22/8/2006 11:40:46 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=5, 1, 0, 15, size=29568 bytes, created 22/8/2006 11:41:04 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=5, 1, 0, 15, size=9984 bytes, created 22/8/2006 11:41:20 AM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======

Verbatim are usually the best choice for RW media - from the “(KEY_MEDIUM_ERROR)” I would think the drive doesn’t like that CMC-made RW disc.

Try with some better discs and see how you go. :slight_smile:

yeah i will do - but i havent had a problem with them yet - unless they are just becoming old and worn out

That just makes it clear that kids shouldnt be too near to computers. :wink:

OK, I would disable Multisession mode.
I also would remove InCD (uninstall if you can).
Next, I would try with good media like Verbatim.

[QUOTE=chef;1946735]
OK, I would disable Multisession mode.
I also would remove InCD (uninstall if you can).
Next, I would try with good media like Verbatim.[/QUOTE]

Yep, those three options should set you right. :wink:

And if you’ve had luck with those discs in the past, then you may be right and they’re just getting a little tired or past their prime :wink: