No Audio In .AVI Sample

This leads me to believe there is no audio in the movie file. I’d like to post a screenshot because of all the info in GSpot, but I can give the highlights here…

(SVCD2DVD 2.0 Stats)

Size : 14.1 mb
Video Type : Mpeg4
TV Standard : NTSC (Film)
Resolution : 640x352
Total Bitrate: 1845 kbps
Audio Type : AC3
Sample Rate : 48,000Khz
Audio Bitrate: 448 kbps
Duration : 00:01:04.4

(GSpot 2.70a Stats)

Sample.avi
Size : 14.1 MB (14,528 KB / 14,876,672 bytes)

[Container]
File Length Correct
OpenDML (AVI v2.0)
Interleave: 1 vid frame (42 ms), preload=480
Audio frames: Split across interleaves
Video: 10.6 MB (75.16%)
Audio: 3.44 MB (24.28%)
AVI Overhead: 82.4 KB (0.57%)

[User Data/Metadata]
[ISFT] VirtualDubMod 1.5.4.1 (build 2178/release)
[IAS1] English
[JUNK] VirtualDubMod build 2178/release
[USER] XviD0037

[Audio]
0x2000 (Dolby AC3) AC3…{CBR}
48000Hz 448 kb/s tot , 6 chnls (3/2 .1)
1 codec installed

[Video c,S]
Codec: XVID
Name: XviD 1.0.3
{MPG4}
{PVOP}

[Video t]
Avg/Max Keyframe (I-frame) Distance: 140.5 avg / 240 max
Duration: 1:04.481
Frame Count: 1,546
Avg Bitrate: 1387
Frame Quality: 0.257
Pics/s: 23.976
Frames/s: 23.976

[Video d]
pic (w x 640x352)
sar: 1.818 (20:11)
par: 1.000 (1:1)
dar: 1.818 (20:11)

[Proposed Codec Solutions and Tests]

{GSpot Vid 1 & 2}
(Src)–>>–(A)–>[AVI Splitter]>–(B)–>[XviD MPEG-4 Video Decoder ]>–©-->[Video Renderer ]
Video Render OK. Use [3] to play
(Src)–>>–(A)–>[AVI Splitter]>–(B)–>[DivX Decoder Filter ]>–©-->[Video Renderer ]
Failed to connect Output pin 0x00931c8c (“Stream 00”) on AVI Splitter to input pin 0x009369fc (“XForm In”) on filter 0x020fcd76 (“DivX Decoder Filter”).ConnectDirect() failed. Error: 0x80040207: [unknown]
(Src)–>>–(A)–>[AVI Splitter]>–(B)–>[VFW:XviD MPEG-4 Codec ]>–©-->[Video Renderer ]
Video Render OK. Use [3] to play

{GSpot Aud 1 & 2}
(Src)–>>–(A)–>[AVI Splitter ]>–(B)–>[InterVideo Audio Decoder ]>–©-->[Default DirectSound Device ]
Failed to connect Output pin 0x0093657c (“Stream 01”) on AVI Splitter to input pin 0x0094301c (“XForm In”) on filter 0x02129758 (“InterVideo Audio Decoder”).ConnectDirect() failed. Error: 0x80040207: [unknown]
(Src)–>>–(A)–>[AVI Splitter ]>–(B)–>[Nero Digital Audio Decoder ]>–©-->[Default DirectSound Device ]
Failed to create instance of Nero Digital Audio Decoder. CoCreateInstance() failed. Error: 0x80004005: [unknown]

{MS A/V}
Partial Render Failure: Following is the error reported by DirectShow:
0x00040242: [unknown]
More specifically, video could be rendered, but the audio could not:
(Src)–>>–(A)–>[AVI Splitter]>–(B)–>[XviD MPEG-4 Video Decoder ]>–©-->[Video Renderer ]

That’s it folks, hope it gives a clue why no audio other than it has “failed”.

CG

DirectShow is having a problem with playing the audio, maybe because it’s Dolby AC3 and possibly you don’t have such a codec installed on your PC?

It’s unusual to find AC3 audio in an XviD encoding; normally it is MPEG1 Layer III (.mp3), but I guess it should play if you have the appropriate AC3 audio decoder.

That was exactly it. I only assumed that the 20 or so editing programs I have should have at least come with all the codecs I would need…

 Thanks for the quick fix!

CG

No probs. Made easy by you including an error log file :flower: