Next bunch of patched firmwares

vbimport

#1

The following firmwares have been added:

[ul]
[li]NEC ND-3570A - Firmware 104B
[/li] [li]Optiarc AD-5260S - Firmware 1.Z9
[/li] [li]Optiarc AD-5280S - Firmware 1.G8 and 1.Z8
[/li] [li]Optiarc AD-7200S - Firmware 102A and 1.52
[/li] [li]Optiarc AD-7203S - Firmware 1.W2
[/li] [li]Optiarc AD-7283S - Firmware 1.01 - include support for second generation drives
[/li] [li]Optiarc AD-7290H - Firmware 10D3 and 1H44
[/li] [li]Optiarc AD-7700H - Firmware 100A
[/li] [li]Optiarc AD-7740H - Firmware 1.X0
[/li] [li]LiteOn iHAS124 W - Firmware HL03 - Flashing these drives is yet untested and RPC1 patch might be broken - in that case please use the auto-reset firmware instead
[/li][/ul]

All the firmwares include RPC1 and Auto-Reset patches, several firmwares also have bitsetting patches. Please check the firmware details page on the drive overview


#2

Thanks Liggy.


#3

Thanks again Liggy, good to see you. Hope you’re feeling better and issues at work are manageable if not better?

A good co-incidence to see the 1.52 for the 7200S as I just managed to get a default 1.52 drive today.

I had tried a few other fw’s which had produced DRM errors - likely due to it being OEM. I then found an old thread here which suggested using the 10b which is working fine.

Would you suggest using the updated 1.52 fw like for like over the 10b?

Best regards.


#4

Thank you very much Liggy


#5

[QUOTE=V1rtual;2679908]Would you suggest using the updated 1.52 fw like for like over the 10b?[/QUOTE]
1.0B is newer than 1.52 so that’s what I would use.


#6

Thank you kindly!


#7

Thank your very much!


#8

Special thanks for 100A. Firmware 1.FA had some annoyances i didn’t like, so now i can continue using “original” firmware;)


#9

Liggy, just sorting mate’s 7201S, it’s currently 1H0B. Have not seen it listed, do you need a 1H0B dump? I can see you have 1H9K and a 1H0E.

Which is the latest / preferred fw for 7201S for auto/bt?

Thanks

Edit: Just noticed looking through 1.09, 1H9K and 1H0E that 1.09 is the only one out of the fw’s that has auto/bt so will try 1.09…


#10

I’m always interested in firmwares that are not on my site and that haven’t been sent to me already. 1H0B to me please :wink:


#11

Liggy i have a 7203s original firmware 1bo


#12

Why didn’t you already send it to me? :bigsmile:


#13

Liggy pm sent


#14

Couldn’t find the old upload link, so have emailed… :wink:

[QUOTE=Liggy;2680915]I’m always interested in firmwares that are not on my site and that haven’t been sent to me already. 1H0B to me please ;)[/QUOTE]


#15

Had to remove the upload link as I can no longer verify users against the forum users.

Another option to provide firmwares would be using filehosters, but mail is good too


#17

What about firmware Optiarc AD-7203S - Firmware 1.W2

Is this newer than 1.09? I’m asking that because strategies seem older.


#18

Liggy, just checking whether you received the email with 1H0B OK or not?


#19

Yes got it. But currently quite busy with all kind of “projects” - so not much time for firmwares.


#20

Cheers, no problem at all, just making sure it did arrive. I was not hinting or prompting as all good with the 1.0B.

I know from your previous comments work has been hectic. Hope things got resolved.


#21

Liggy… thanks!