NEX 2500a cant write cd's or dvd's

vbimport

#1

Please can somebody direct me, i got a new nec 2500a but dont seem to be able write cd’s or dvd’s ant any speed, fails on the simulation. cheers

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘E:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Nero version: 6.3.1.15
Recorder: <_NEC DVD_RW ND-2500A> Version: 1.06 - HA 0 TA 1 - 6.3.1.15
Adapter driver: <nvidesm> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD_RW ND-2500A >Version: 1.06 - HA 0 TA 1 - 6.3.1.15
Adapter driver: <nvidesm> HA 0

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y200P0 YAR4 nvidesm Port 0 ID 0 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-2500A 1.06 nvidesm Port 0 ID 1 DMA: Off
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-2500A D: CDRom0
NERO IMAGEDRIVE2 F: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 253MB (259992kB)
Memory in use : 50 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

2.7.2004
CueSheet
17:53:19 #1 Phase 90 File dlgbrnst.cpp, Line 1845
Buffer Underrun Protection activated

17:53:19 #2 Text 0 File Reader.cpp, Line 118
Reader running

17:53:19 #3 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD_RW ND-2500A running

17:53:19 #4 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-at-once, using CD-R/RW media

17:53:19 #5 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 108777 ( 24:12.27)

17:53:19 #6 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

17:53:19 #7 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: _NEC DVD_RW ND-2500A;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 2B 00 D0 (invalid), 2: 3D B8 00 (invalid), 3: 21 98 80 (invalid)

17:53:19 #8 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================

17:53:19 #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_RAW_MODE1 (Cue Sheet Track)
2 indices, index0 (150) provided
original disc pos #0 + 108778 (108778) = #108778/24:10.28
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 108778 blocks [_NEC DVD_RW ND-2500A ]
--------------------------------------------------------------

17:53:19 #10 Text 0 File ThreadedTransferInterface.cpp, Line 983
Prepare recorder [_NEC DVD_RW ND-2500A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 223084544, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
108778 | lead-out | 1 | 0x00 | 0x41

17:53:19 #11 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started

17:53:19 #12 Text 0 File Burncd.cpp, Line 4177
Cache writing successful.

17:53:19 #13 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed

17:53:19 #14 Phase 28 File dlgbrnst.cpp, Line 1845
Speed measurement started

17:53:19 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2343
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

17:53:24 #16 Text 0 File WriterStatus.cpp, Line 115
<_NEC DVD_RW ND-2500A > start writing Lead-Out at LBA 108778 (1A8EAh), lenght 0 blocks

17:53:24 #17 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

17:53:24 #18 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

17:53:24 #19 Phase 29 File dlgbrnst.cpp, Line 1796
Speed measurement completed: 438.5x (65,776 KB/s)

17:53:24 #20 Phase 32 File dlgbrnst.cpp, Line 1845
Simulation started at 4x (600 KB/s)

17:53:24 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2343
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

17:53:24 #22 Text 0 File Mmc.cpp, Line 15624
StartDAO : CD-Text - Off

17:53:24 #23 Text 0 File Mmc.cpp, Line 20239
Set BUFE: supported -> ON

17:53:24 #24 Text 0 File Mmc.cpp, Line 15911
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 18 0c 1c

17:53:35 #25 SCSI -500 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03B60000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

17:53:35 #26 CDR -500 File Writer.cpp, Line 304
SCSI command aborted
_NEC DVD_RW ND-2500A\H0 T1

17:53:54 #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

17:53:54 #28 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

17:53:58 #29 SCSI -500 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

17:54:17 #30 CDR -500 File WriterStatus.cpp, Line 164
SCSI command aborted
_NEC DVD_RW ND-2500A\H0 T1

17:54:17 #31 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once

17:54:17 #32 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

17:54:17 #33 Phase 34 File dlgbrnst.cpp, Line 1845
Simulation failed at 4x (600 KB/s)

Existing drivers:
File ‘Drivers\InCDfs.SYS’: Ver=4, 2, 9, 1, size=90880 bytes, created 24/05/2004 13:57:34 (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=4, 2, 9, 1, size=25600 bytes, created 24/05/2004 13:57:52 (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=4, 2, 9, 1, size=5760 bytes, created 24/05/2004 13:59:24 (InCD4 driver for win NT/2K/XP)
File ‘Drivers
videsm.sys’: Ver=5.10.2600.0307 built by: WinDDK, size=20224 bytes, created 13/11/2002 08:10:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)