Newbie need some help, pls

vbimport

#1

Hi, i am a newbie and just got my benq 1620 retail and flash the firmware to B7T9. I use neroto burn the dvd with the following Disc Quality Test :

media = benq 8x dvd+R

General Information burn at 8x
Drive: BENQ DVD DD DW1620
Firmware: B7T9
Disc: DVD+R (DAXON AZ2)
Selected speed: 8 X

PI errors
Maximum: 29
Average: 8.77
Total: 105757 <--------

PI failures
Maximum: 6
Average: 0.13
Total: 1436 <--------

PO failures: 0

Jitter
Maximum: 10.6 %
Average: 8.47 %

Scanning statistics
Elapsed time: 9:44
Number of samples: 17851
Average scanning interval: 8.01 ECC
Glitches removed: 0

Reading from the thread, people said that…
PI Failures should not exceed 16.
PI Errors should not exceed 280.
jitter max <12.0%

however should i be concern if the total error pi / po is high?
Please advice, thanks


#2

Looks like a decent burn to me…not the best but not bad. If it were me, I would probably use a little better quality media in the future, but I don’t think you’ll have any playback problems with that disc at all.

Welcome!

Jeff


#3

Reading from the thread, people said that…
PI Failures should not exceed 16.
PI Errors should not exceed 280.
jitter max <12.0%

The PIF and PIE numbers you list refer to “maximum”. Your disc is well under these, so there shouldn’t be any problems.


#4

Thank for the fast reply. I was wondering what media brand do you suggest?

Regarding the error total, I am referring to
PI errors
Total: 105757 <--------

PI failures
Total: 1436 <--------


#5

use Fuji (TAIYO YUDEN), Maxell media code MAXELL 002 or RICOH, VERBATIM & TDK media code TTG01 or TTG02.