New Sohw-1693s Major Issues

vbimport

#1

I replaced a MD8X DVD CD-RW burner when the cd died. The DVR works perfectly even now though it was retired for the new SOHW-1693S. I burned 4 disks clean beautiful clear as a crystal. To get it to do this I changed the DVD9 (double layer) to DVD5 single layer and each disk to be burned was less that the capacity of the disk. Then it stoped burning leaving me this message: DVD GENERATING HIGH COMPATIBILITY BORDERS FOLLOWED BY DVD GENERATING HIGH COMPATIBILITY BORDERS SUCCESSFULLY BURN FAILED @ 16x. Below is the log can someone give me a clue please? Thanks.

C A Williams Jr

1A20-0202-0330-1727-0458-7779

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:03:20 AM
ahead WinASPI: File ‘C:\Program Files\Ahead
ero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS0B - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVDRW SOHW-1693S>Version: KS0B - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800JB-00ETA0 atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : LITE-ON DVDRW SOHW-1693S atapi Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1693S D: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 759MB (777780kB)
Free physical memory: 193MB (197672kB)
Memory in use : 74 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

29.3.2006
UDF/ISO compilation
10:31:28 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started

10:31:28 PM #2 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)

10:31:28 PM #3 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

10:31:28 PM #4 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted

10:31:28 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

10:31:28 PM #6 Text 0 File Reader.cpp, Line 124
Reader running

10:31:28 PM #7 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1693S running

10:31:28 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

10:31:29 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

10:31:29 PM #10 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

10:31:29 PM #11 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2212719 (491:42.69, 4321MB)

10:31:29 PM #12 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

10:31:29 PM #13 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

10:31:29 PM #14 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:31:29 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2212720 (2212720) = #2212720/491:42.70
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2212720 blocks [LITE-ON DVDRW SOHW-1693S]
--------------------------------------------------------------

10:31:29 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [LITE-ON DVDRW SOHW-1693S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4531650560, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2212720 | lead-out | 1 | 0x41 | 0x00

10:31:29 PM #17 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

10:31:29 PM #18 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

10:31:29 PM #19 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

10:31:29 PM #20 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

10:31:29 PM #21 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

10:31:29 PM #22 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 16x (22,160 KB/s)

10:31:30 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:31:30 PM #24 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC…
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16…63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 …MCC…004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7…Tl…_…
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 …

10:31:30 PM #25 Text 0 File DVDR.cpp, Line 6036
Drive: LITE-ON DVDRW SOHW-1693S
Book Type request [LO], rev 3: DVD-ROM
Changing the Book Type was finished successfully, return code 0

10:31:30 PM #26 CDR -1207 File DVDR.cpp, Line 5463
Book Type automatically set to: DVD-ROM

10:31:30 PM #27 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

10:38:01 PM #28 SPTI -1135 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 E1 C0 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x072a0000: Len x10000
0x00 00 01 BA 44 0F 7E 8C 5D C9 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 13 59 66 D3 6C 0F B2 8D 45
0x45 3A 04 B6 5F 28 54 5C 85 05 C9 06 86 B4 20 65

10:38:01 PM #29 CDR -1135 File Writer.cpp, Line 311
Write error
D: LITE-ON DVDRW SOHW-1693S

10:38:01 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:38:01 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

10:38:01 PM #32 Phase 127 File dlgbrnst.cpp, Line 1685
Generating DVD high compatibility borders

10:38:01 PM #33 Phase 129 File dlgbrnst.cpp, Line 1685
Generating DVD borders completed successfully

10:38:01 PM #34 Text 0 File DVDR.cpp, Line 6036
Drive: LITE-ON DVDRW SOHW-1693S
Book Type request [LO], rev 3: DVD+R
Changing the Book Type was finished successfully, return code 0

10:38:34 PM #35 SPTI -600 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x55 10 00 00 00 00 00 00 3C 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x02de5a00: Len x3c
0x00 00 00 00 00 00 00 00 05 32 01 C4 08 00 00 00
0x00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

10:38:34 PM #36 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 16x (22,160 KB/s)

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 9:05:10 AM
File ‘Drivers\InCDfs.SYS’: Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

P.S. I STOP ALL APPLICATIONS WHEN BURNING OR DECRYPTING OR RECODING.

I HAVE THE LATEST SOHW-1693s FIRMWARE UPDATE KSOB INSTALLED


#2

Your DMA is off on both IDE channels, what box are you running.
Try a burn at 8 or 12x when DMA issue is fixed.

Not related to your problem, but uninstalling Nero InCD is recommended.

[I]Moderators, please remove serial[/I]


#3

Thanks Pinto. Problem I think my board is too old to carry DMA or Ultra DMA. If you have a way to enable it tell me where the documentation is and I will locate and do so. By the way my MD8X burned just fine in PIO Transfer mode. Thanks for the 411, I appreciate the insight.

DMA I’ve followed the XP Pro method to enable DMA if available but to no avail, it still show’s PIO Transfer and never toggles to DMA despite following the instructions. Is there something else I need to do?

Thank you.
:sunglasses:


#4

To really use this drive you need a machine capable of handling udma 4. If not you will never really get a good 12 or 16x burn. Also if your computer is older, I really doubt you will have the bus speed to get 16x burns even with dma mode. Unfortunalty either upgrade your motherboard or just keep using your 8x md drive. You could use the 1693 to scan disks and write up to 8x though.

These are the recommended setup of the 1693. Do you have something as good as this? If so you should be able to get udma mode.

Pentium 4 1.3 GHz or higher CPU and 128 MB or higher RAM are required.

May want to try buying a controller card. this is what I use for some of my drives, they all work fine in udma mode except for my benqs with this controller


#5

Hi,

How old is that board? UDMA is supported at least since boards manufactured in the year 2000.

If you have a way to enable it tell me where the documentation is and I will locate and do so.
You’ll have to find out the exact type of your mainboard. To do so, open the computer and have a look at the mainboard. There should be the exact name printed somewhere. Or get a hardware diagnostic tool like Everest. If you know then the right name of your mainboard, you should be able to find a manual on the web, search should be started at the manufacturers website (mostly located in taiwan).

DMA I’ve followed the XP Pro method to enable DMA if available but to no avail, it still show’s PIO Transfer and never toggles to DMA despite following the instructions. Is there something else I need to do?

More generic: Enter your BIOS setup (mostly by pressing “DEL” or “F2” after turning on) and check all options concerning IDE/DMA/PIO/UDMA. Set all to “Auto”. Save settings and reboot.

Also useful is to install latest mainboard chipset drivers. You can get them from mainboard manufacturers website, too.

Maybe that helps,
Michael


#6

I have the following: PcChips M741LMRT / 500 MHZ PIII / 512MB Cache / 100mhz FSB / 80gb HDD WD / 768mb SDRAM / XP Pro OS / MS Office Pro 2K / BIOS shows Ultra DMA mode enabled but not reflected.

In other words it’s doing things it shouldn’t be able to do now so I guess I’m fortunate I got this far.

Thanks everyone for the 411. Time to make the doughnuts I guess (new mobo).


#7

Yes motherboard/cpu combos are quite inexpensive these days. probably for around 150$ you could upgrade your motherboard/cpu to a p4 with 512 meg. of ddr ram if you shop around.


#8

Yup. :confused:


#9

Be blessed guys thanks for the support.
:sunglasses:


#10

GENTLEMAN:
939NF4G-SATA2 (w) 3500 XP ATHLON 64 HT CHIP?
MULTIVERSATILE BOARD INTEGRATED GRAPHICS AND SOUND
NORTH AND SOUTH BRIDGE WITH CAPACITY TO HANDLE XP ATHLON 64 / XP ATHLON 64 FX / XP ATHLON 64 DUAL CORE / ETC.
LARGE MEMORY CAPACITY / 1000 MHZ FSB - FAST?