New Smartburn v 3.1.6 + PDF

vbimport

#1

Dated 2003/11/11.

Smartburn 3.1.6

There's even a pdf now: Smartburn PDF


#2

Thanx for this info -thibouille-

Is there any “changelog” for this new version?

For all of you with problem getting the pdf-file down, try a dl-manager like flashGet or ReGet.

This “new” prog is straight forword (as xx.5) so you should´t need this file. (One page with 2pics and 2 rows of text!)


#3

Nothing else than usual “This utility bla bla bla…” :bigsmile:


#4

Originally posted by thibouille

There’s even a pdf
It’s the same as before.

Most importantly, there was a bug concerning the manufacturer ID
( both MInfo 1.6 and KProbe 1.1.26 ID-ed it correctly ! ),
which now seems to be fixed :


#5

Thanx for the info -BoSkin-
/Tack-:slight_smile:


#6

I can’t use this program with my 851?



#7

Not many people out there with an 851S yet because it’s so new. I would imagine it should work. But perhaps LiteOn needs to release a new version to be compatible with that new drive.
Hopefully there is someone else out there with the 851S that can try it out (or because the tool is from LiteOn you could try sending them an email asking them if 851S works with it).

For the time being try using one of the other two tools for scanning media. Check the guide in my sig. They are mentioned with the Kprobe tool area and have a link there.

(one last idea, are you sure you have the right drive selected from the drop down menu?)


#8

The SmartBurn Utility supports the LDW-851S. Whenever you see that error it is likely because of an improper installation of ASPI drivers. I used killaspi.bat from ForceASPI to uninstall ASPI altogether and this let SmartBurn use SPTI instead. If you have Windows XP/2000, then you can do the same, but if you have Windows 98/ME then you don’t have the option of using SPTI and you’ll need to reinstall ASPI or try another version or something.

ASPI and SPTI are just different “drivers” that let software communicate with hardware.

See here for info on ASPI: http://aspi.radified.com


#9

Originally posted by BoSkin
[B]It’s the same as before.

Most importantly, there was a bug concerning the manufacturer ID
( both MInfo 1.6 and KProbe 1.1.26 ID-ed it correctly ! ),
which now seems to be fixed :

[/B]

But hang on, isn’t 97:27:00 one of the “generic” unassigned ATIP codes? KProbe/SmartBurn should read “Manufacturer Unknown” in this case.


#10

how come I get no drive detected ? 811s with HSTQ
Used DVD Identifier with no prob. Also KProbe

Thx


#11

Originally posted by ahgc

how come I get no drive detected ?
Have you read dhc014’s post carefully ?


#12

Originally posted by terminalvelocd

KProbe/SmartBurn should read “Manufacturer Unknown” in this case.
Should they ?
I remember someone saying about their ID info being the most up-to-date. :wink:

KProb 1.1.28 :

Disc Type = NORMAL CD-RW
Manufacturer = Ricoh Company Limited
Lead-in Start Time of Last Session = 97:27:00(61:1B:00h)
Last Possible Start Time for Startof Lead-out = 74:12:00(4A:0C:00h)

SB v3.16 :

Disc Type = NORMAL CD-RW
Material = Phase Change
Lead In = 97:27:00
Lead Out = 74:12:00
Nominal Capacity = 651.86MB
Manufacturer Maybe = Ricoh Company Limited
SMART-BURN Speed Limit = 4X (Write)

MInfo v.1.6 :

Disc Type = NORMAL CD-RW
Lead In = 97:27:00
Lead Out = 74:12:00
Nominal = 651.86MB (74m 12s 00f/LBA:333750)
Manufacturer = Ricoh Company Limited
Cur. Speed = Wrt(4X),Rd(12X)

SB v.2.0 :

Disc Type, Material = CD-RW, Phase Change
ATIP Lead-in = 97m 27s 00f
Norminal Capacity = 651.86MB (74m 12s 00f)
Disc Manufacturer maybe = RICOH,MCW,Maxell
SMART-BURN Speed Limit = 4X

CD Doctor v.1.2.0b :

Manufacturer: DIGITAL STORAGE TECHNOLOGY CO.,LTD
Lead-In start (ATIP): 97:27:00 (-11625)
Media Type: CD-RW
Lead-Out Maximum: 74:12:00 (333750)
Dye Type: Unknown
Capacity: 651.86[MB]

CDR Id 1.63 :

ATIP: 97m 27s 00f
Disc Manufacturer: Disc ID not allowed
Reflective layer: Phase change
Media type: CD-ReWritable
Recording Speeds: min. unknown - max. 4X
nominal Capacity: 651.86MB (74m 12s 00f / LBA: 333750)

CDR ATIP Reader 0.92 :

Media : CD-RW media
Subtype: Standard Speed CD-RW
DiscB[/B] Manufacturer : Digital Storage Technology Co.,Ltd
Recording Characteristics : Long Strategy Type (ex. Cyanine type media)
Indicative Target Writing Power : 6 mW
Use : Restricted
Capacity (nominal) : 651.86 Mb
Highest Usable CLV Recording Speed : 4X

Nero CD-DVD Speed 2.11 :

Manufacturer : unknown
Code : 97m27s00f
Disc Type : CD-RW
Usage : General
Recording Layer : Phase Change
Recording Speed : 1 X - 4 X
Capacity : 74:12.00 652 MB
Additional Capacity : n/a
Overburn Capacity : not tested

ATIP info from disk - Read by Feurio 1.66.6ß

ATIP start of lead in: -02:33:00 (sector: -11475)
ATIP start of lead out: 74:12:00 (sector: 333900)
Manufacturer code: 97 27 00
Disc type: Rewriteable
Disc subtype: Normal CD-RW (max. 4x)


Go figure ! :wink:


#13

Smartburn works great!

Thank you LiteOn development!

and thank you thibouille for posting :wink:


#14

Originally posted by wesociety

Thank you LiteOn development!

and thank you thibouille for posting :wink:
…and thank you for thanking all, lol. :bigsmile:


#15

Originally posted by BoSkin
…and thank you for thanking all, lol. :bigsmile:

Yeah, somethin’ like that :bigsmile:


#16

It thinks a 4x media (MCC-002) 8x, but the drive produces a coaster. I had to manually override with 4x to get it work.

see post http://club.cdfreaks.com/showthread.php?threadid=86455