New ffdshow how to set it up to work with bd rebuilder

vbimport

#1

i went and downloaded the new ffdshow and it has a new look i want to set it up to work with bd-rebuilder but i am not sure what to set like i tried to do a copy of my perfect getaway and bd rebuilder failed here is a copy of what failed -----------------------
[17:58:12] BD Rebuilder v0.31.06 (beta)

  • Source: A_PER_GETAWAY
  • Input BD size: 22.78 GB
  • Approximate total content: [01:47:39.661]
  • Target BD size: 7.72 GB
  • Windows Version: 5.1 [2600]
  • MOVIE-ONLY mode enabled
  • Audio Settings: AC3=1 DTS=1 HD=0 Kbs=640
    [17:58:12] PHASE ONE, Encoding
  • [17:58:12] Extracting A/V streams [VID_00124]
  • [19:05:39] Reencoding: VID_00124 (1 of 1)
  • [19:05:39] Collecting video information
    • Source Video: VC-1, 1920x1080
    • Rate/Length: 23.976fps, 154,877 frames
    • Bitrate: 8,717 Kbs
  • [19:05:39] Reencoding: VID_00124, Pass 1 of 2
  • Encode failed. Retrying.
  • Encode failed. Retrying.
  • Reached retry limit. Aborting.
  • FFDSHOW Revision: (3133)
    [19:08:44] - Failed video encode, aborted

[19:31:15] BD Rebuilder v0.31.06 (beta)

  • Source: A_PER_GETAWAY
  • Input BD size: 22.78 GB
  • Approximate total content: [01:47:39.661]
  • Target BD size: 7.72 GB
  • Windows Version: 5.1 [2600]
  • MOVIE-ONLY mode enabled
  • Audio Settings: AC3=1 DTS=1 HD=0 Kbs=640
    [19:31:23] PHASE ONE, Encoding
  • [19:31:23] Extracting A/V streams [VID_00124]
  • [20:30:33] Reencoding: VID_00124 (1 of 1)
  • [20:30:33] Collecting video information
    • Source Video: VC-1, 1920x1080
    • Rate/Length: 23.976fps, 154,877 frames
    • Bitrate: 8,717 Kbs
  • [20:30:33] Reencoding: VID_00124, Pass 1 of 2
  • Encode failed. Retrying.
  • Encode failed. Retrying.
  • Reached retry limit. Aborting.
  • FFDSHOW Revision: (0)
  • FFDSHOW: VC-1 not set to wmv9
  • FFDSHOW: MPEG-2 is not set to libavcodec
  • FFDSHOW: AVC is not set to libavcodec
    [20:30:36] - Failed video encode, aborted

[20:49:59] BD Rebuilder v0.31.06 (beta)

  • Source: A_PER_GETAWAY
  • Input BD size: 44.90 GB
  • Approximate total content: [03:27:29.645]
  • Target BD size: 22.46 GB
  • Windows Version: 5.1 [2600]
  • Audio Settings: AC3=1 DTS=1 HD=0 Kbs=640
    [20:50:00] PHASE ONE, Encoding
  • [20:50:00] Extracting A/V streams [VID_00011]
  • [20:50:23] Reencoding: VID_00011 (1 of 3)
  • [20:50:23] Collecting video information
    • Source Video: VC-1, 1920x1080
    • Rate/Length: 23.976fps, 3,816 frames
  • [20:50:23] Reencoding: VID_00011, Pass 1 of 1
  • Encode failed. Retrying.
  • Encode failed. Retrying.
  • Reached retry limit. Aborting.
  • FFDSHOW Revision: (0)
  • FFDSHOW: VC-1 not set to wmv9
  • FFDSHOW: MPEG-2 is not set to libavcodec
  • FFDSHOW: AVC is not set to libavcodec
    [20:50:25] - Failed video encode, aborted
    now i don’t see anywher the vc-1 or the other stuff so any help would be thankful keep up the good work

#2

Which operating system are you using? If you are still on XP, jdobbs recommends installing WMV11 (comes with Windows Media Player 11) and disabling ffdshow for VC-1. For Vista and Win7 select wmv9.

You can adjust settings for ffdshow by going to Programs–>ffdshow–>Video decoder configuration–>Codecs. Go to the decoder used for VC-1 and change to disabled, mpeg-2 to libavcodec and H264/AVC to libavcodec (or ffmpeg-mt which shows to be still experimental)

There is a new version of BD-Rebuilder by the way. Released today.

Edit: Oops, corrected mistake.