Hi, is there anybody using 4084N? I hardly find informations about it. I bought one which OEM for HP. Where can I find its crack firmware?
We've run into KQ09, what version do you have. Please post a summary (File, Save) from DiscInfo. http://discinfo.rpc1.org/
Yes, I've also run into KQ09. And I find the same problem as when I use NEC ND-6650A. My toshiba can't recognize it when booting. And windows can only recognize as secondary slave with DMA off(I read these info from NERO). Does the way that connecting 45 and 47 pin work with HL drivers as NEC's? Is there anyone have the same problem?
Another question, does 4084N support -R DL?
that'`s because your drive is a slimline and has not the appropriate firmware for your lappy.
Chef , you are not right! !
I found almost toshiba laptop CDROM BIOS setting is SLAVE JUMP. but HLDS 4084N is master setting.
you can try TEAC W28EA , this type is SLAVE
another way is change 47 pin setting . it need a little hardware knowledge.one article FYI: http://www.xlr8yourmac.com/tips/Pioneer_K04L_master_mod.html
Switch to the right topic,Master Vlad. it really need your help , I found firmware KQ09 version have big problem. lots of disk cannot be recognized
DISCINFO VERSION : 18.104.22.168VENDOR : HL-DT-STMODEL : DVDRAM GSA-4084NREVISION : KQ09VENDOR SPECIFIC : LOADING MECHANISM : TraySERIAL NUMBER : 5AA85B82763ANUMBER VOL. LEVELS : 256BUFFER SIZE : 2048KBINTERFACE : ATAPIRPC2 SCHEME : YESSTATUS : Not SetUSER CHANGES : 5VENDOR CHANGES : 4CURRENT REGION : Not setANALOG AUDIO PLAY : YESCOMPOSITE OUTPUT : NODIGITAL PORT-PORT1 : NODIGITAL PORT-PORT2 : NOREAD UPC CODE : YESMULTISESSION READ : YESMODE 2 FORM 1 : YESMODE 2 FORM 2 : YESREAD ISRC CODE : YESREAD BAD CODE : NOBUFFER UNDER-RUN : YESMT. RAINIER : NOCAN READ CDR : YESCAN READ CDRW : YESCAN READ CDRM2 : YESCAN WRITE CDR : YESCAN WRITE CDRW : YESCAN TEST WRITE : YESCAN READ DVD-ROM : YESCAN READ DVD-R : YESCAN READ DVD-RW : YESCAN READ DVD-RAM : YESCAN READ DVD+R : YESCAN READ DVD+RW : YESCAN WRITE DVD-R : YESCAN WRITE DVD-RW : YESCAN WRITE DVD-RAM : YESCAN WRITE DVD+R : YESCAN WRITE DVD+RW : YESMAX CDR READ SPEED : 24MAX CDR WRITE SPEED: 24
I just switched out my stock burner in my dell Insiron 6000 to the 4048n. Windows allows me to use the drive in read mode. But I can not burn straight to the drive from windows to a CD. Any thoughts? Thanks in advance.