New Burning Problem with ConvertXtoDVD

PROBLEM LISTED BELOW:

Can someone out there please help me with this weird problem that came up all of the sudden?

  1. EVERYTHING is correct and compatible.

  2. Recently converted files AND repeatedly burnt discs successfully

  3. Have a PURCHASED, latest version (3.0.0.9)

  4. Sony DVD-R nice media with my Sony drive…no problems there.

  5. Settings are DEFINITELY correct on all tabs

  6. Windows XP, Intel 4 cpu…plenty of room on my Hard Drive…as i said…NO problems EVER…UNTIL the other day.

This has been my ‘Log Readings’(there has never been any ‘Burn Error’ indicated) for every single Burn Project SINCE the problem:

4/6/2008 4:45:54 PM info BURN: Finalization Time 00:00:27 - Total completion time 00:11:43
4/6/2008 4:45:54 PM info BURN: WRITE SUCCESS
4/6/2008 4:45:26 PM info BURN: Write finished in 00:11:16 - Finalization start here. Avg. burn rate 4.08
4/6/2008 4:34:26 PM info BURN: Lead-in burning time (mS) 16267
4/6/2008 4:34:10 PM info BURN: Write started 1698880 sectors to write
4/6/2008 4:34:10 PM info BURN: Init success: DVD-R DAO
4/6/2008 4:34:10 PM info BURN: Writing speed requested x4.0, effective x4.0
4/6/2008 4:34:09 PM info BURN: Available write speed: 8x, 6x, 4x
4/6/2008 4:34:09 PM info BURN: Media ID: TYG02
4/6/2008 4:34:09 PM info BURN: Media type: DVD-R
4/6/2008 4:34:09 PM info BURN: Ultra DMA mode 4 (ATA66)
4/6/2008 4:34:06 PM info BURN: Scanned files #10, folder #2 - total size 3478183936 b. (3.24 Gb.)
4/6/2008 4:34:06 PM info BURN: Inserted media type : DVD-R
4/6/2008 4:34:06 PM info BURN: Write started

Since problem, I have done UNsuccessful Burns, as I have tried MANY times - changing ALL the settings and trying a Burn each time after trying ALL the different settings.

As I said, ALL my settings and my past Conversions and Burns were always successful, so I have all that hard stuff DONE.

And again, have ENTIRELY uninstalled and installed three times.

HOWEVER…THE PROBLEM:

I put the Disc in, select all my ‘settings’…

Choose the folder with the three files(AUDIO_TS, ORIGINAL, and VIDEO_TS) as always.

As you can see by the Log, everything is recognized and ready to start the Burn.

THEN…The ‘Burn Progression Bar’(right above the Log window) starts Loading as usual, BUT, as you can see, the Log shows NO chapters being burnt, No Burning is happening.

THEN…The Mystery…

The ‘Burn Progression Bar’ immediately starts dropping from ‘1 hour remaining’ down to ‘37 minutes remaining’, to ‘20 minutes remaining’, to ‘14 minutes remaining’ then finalizes and ejects my Disc…THE WHOLE PROCESS taking only about 11 minutes.

…and obviously not Burning ‘ANYTHING’ to the Disc.

Sounds to me like this is a new problem, probably only experienced by a few of us…

But I can’t do a thing to fix this.

Even entered my ‘KEY’ in each time too.

So, can anyone, the Techs included, please shed some light on this for me?

It’s been vexing to say the least.

Many Thanks,
Rob

I’m waiting for you Camaro and Joe…|-)