Nero v. 6.3.1.25 burner process failure message

Just got a new batch of Fujifilm DVD-Rs and experienced a burn error on a few occasions. Previously used Sony DVD-Rs and all was fine.

Could it be that this brand of DVD is incompatible with my burner (NEC DVD-+RW ND-3450A)?

Here is a copy of the burn error log – thanks in advance:

Nero version 6.3.1.25

1A23-0006-7130-1888-1041-4644

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.57 (1008), size=48128 bytes, created 12/22/1997 5:23:24 PM
ahead WinASPI: File ‘C:\Program Files\Ahead
ero\Wnaspi32.dll’: Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 6:33:44 PM
Nero version: 6.3.1.25
Recorder: <_NEC DVD±RW ND-3450A> Version: 102B - HA 0 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD±RW ND-3450A>Version: 102B - HA 0 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : _NEC DVD±RW ND-3450A atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1600JD-75HBB0 atapi Port 1 ID 0 DMA: On
ScannerPeripheral : scanner 330CS 2.06 SMPLSCSI Port 2 ID 5 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD±RW ND-3450A D: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 509MB (522220kB)
Free physical memory: 244MB (250264kB)
Memory in use : 52 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.4.2006
===== Disc-Copy over image - 1st step : Copy to image …

7:40:17 PM #1 Text 0 File Reader.cpp, Line 126
Reader running

7:40:17 PM #2 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running

7:40:17 PM #3 Text 0 File DVDCopy.cpp, Line 271
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 12272 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)
S01 T02 Con 0x14 Start 12288 Len 176 (gap 16) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)
S01 T03 Con 0x14 Start 12480 Len 579216 (gap 16) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)
S01 T04 Con 0x14 Start 591712 Len 16 (gap 16) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)

7:40:17 PM #4 Text 0 File DVDCopy.cpp, Line 374
Max -1 tracks of 4 allowed to copy
1: 0 - 12272 = 12272, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
2: 12288 - 12464 = 176, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
3: 12480 - 591696 = 579216, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
4: 591712 - 591728 = 16, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

7:40:17 PM #5 Text 0 File Burncd.cpp, Line 3152
Turn on Track-at-once, using DVD-R/RW media

7:40:17 PM #6 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
Last address to be written: 591727 (131:29.52, 1155MB)

7:40:17 PM #7 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)

7:40:17 PM #8 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

7:40:17 PM #9 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

7:40:17 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 12288 (12288) = #12288/2:43.63
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 12288 blocks [ Image Recorder ]
1: TRM_DATA_MODE1 (2 - Data (mode 1))
2 indices, index0 (0) not provided
original disc pos #12288 + 192 (192) = #12480/2:46.30
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 192 blocks [ Image Recorder ]
2: TRM_DATA_MODE1 (3 - Data (mode 1))
2 indices, index0 (0) not provided
original disc pos #12480 + 579232 (579232) = #591712/131:29.37
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 579232 blocks [ Image Recorder ]
3: TRM_DATA_MODE1 (4 - Data (mode 1))
2 indices, index0 (0) not provided
original disc pos #591712 + 16 (16) = #591728/131:29.53
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 16 blocks [ Image Recorder ]
--------------------------------------------------------------

7:40:17 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [ Image Recorder ] for write in TAO
DAO infos:
==========
MCN: “”
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 4:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 25473024, ISRC “”
2: TRM_DATA_MODE1, 2048/0x00, FilePos 25473024 25473024 25866240, ISRC “”
3: TRM_DATA_MODE1, 2048/0x00, FilePos 25866240 25866240 1212133376, ISRC “”
4: TRM_DATA_MODE1, 2048/0x00, FilePos 1212133376 1212133376 1212166144, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
12288 | 2 | 0 | 0x00 | 0x41
12288 | 2 | 1 | 0x00 | 0x41
12480 | 3 | 0 | 0x00 | 0x41
12480 | 3 | 1 | 0x00 | 0x41
591712 | 4 | 0 | 0x00 | 0x41
591712 | 4 | 1 | 0x00 | 0x41
591728 | lead-out | 1 | 0x00 | 0x41

7:40:17 PM #12 Phase 120 File dlgbrnst.cpp, Line 1855
Creating the image for burning

7:40:17 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

7:40:26 PM #14 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

7:40:26 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #12288): write at #12288

7:40:26 PM #16 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

7:40:26 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 2 (not relocatable, no disc pos, no patch infos, orig at #12480): write at #12480

7:45:58 PM #18 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

7:45:58 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 3 (not relocatable, no disc pos, no patch infos, orig at #591712): write at #591712

7:45:58 PM #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

7:45:59 PM #21 Phase 121 File dlgbrnst.cpp, Line 1855
Creating Image completed successfully

===== Disc-Copy over image - 2nd step : Burn the image …

7:46:14 PM #1 Text 0 File Reader.cpp, Line 126
Reader running

7:46:14 PM #2 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD±RW ND-3450A running

7:46:16 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as TAO.
MTYP: Mediumtype = DVD-R/RW (0x6)
Image file name: <C:\Documents and Settings\Tony Berberabe\My Documents\TempImage.nrg>

7:46:16 PM #4 Text 0 File Burncd.cpp, Line 3152
Turn on Track-at-once, using DVD-R/RW media

7:46:25 PM #5 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 592177 (131:35.52, 1156MB)

7:46:25 PM #6 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)

7:46:26 PM #7 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: _NEC DVD±RW ND-3450A, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193

7:46:26 PM #8 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

7:46:26 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 12288 (12288) = #12288/2:43.63
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 12272 blocks [_NEC DVD±RW ND-3450A]
1: TRM_DATA_MODE1 (2 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #12288 + 192 (192) = #12480/2:46.30
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 176 blocks [_NEC DVD±RW ND-3450A]
2: TRM_DATA_MODE1 (3 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #12480 + 579232 (579232) = #591712/131:29.37
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 579216 blocks [_NEC DVD±RW ND-3450A]
3: TRM_DATA_MODE1 (4 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #591712 + 16 (16) = #591728/131:29.53
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 16 blocks [_NEC DVD±RW ND-3450A]
--------------------------------------------------------------

7:46:26 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [_NEC DVD±RW ND-3450A] for write in TAO
DAO infos:
==========
MCN: “”
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 4:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 25165824, ISRC “”
2: TRM_DATA_MODE1, 2048/0x00, FilePos 25165824 25473024 25866240, ISRC “”
3: TRM_DATA_MODE1, 2048/0x00, FilePos 25866240 26173440 1212440576, ISRC “”
4: TRM_DATA_MODE1, 2048/0x00, FilePos 1212440576 1212747776 1212780544, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
12288 | 2 | 0 | 0x00 | 0x41
12438 | 2 | 1 | 0x00 | 0x41
12630 | 3 | 0 | 0x00 | 0x41
12780 | 3 | 1 | 0x00 | 0x41
592012 | 4 | 0 | 0x00 | 0x41
592162 | 4 | 1 | 0x00 | 0x41
592178 | lead-out | 1 | 0x00 | 0x41

7:46:26 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1030
Removed 16 run-out blocks from end of track 1. Length: 12288 -> 12272.

7:46:26 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1030
Removed 16 run-out blocks from end of track 2. Length: 192 -> 176.

7:46:26 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030
Removed 16 run-out blocks from end of track 3. Length: 579232 -> 579216.

7:46:26 PM #14 Phase 28 File dlgbrnst.cpp, Line 1855
Speed measurement started

7:46:26 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

7:46:27 PM #16 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

7:46:27 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #12288): target disc position #0 differs (ignored in speed test), write at #0

7:46:27 PM #18 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

7:46:27 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 2 (not relocatable, no disc pos, no patch infos, orig at #12480): target disc position #0 differs (ignored in speed test), write at #0

7:47:01 PM #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

7:47:01 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 3 (not relocatable, no disc pos, no patch infos, orig at #591712): target disc position #0 differs (ignored in speed test), write at #0

7:47:01 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

7:47:01 PM #23 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

7:47:01 PM #24 Phase 29 File dlgbrnst.cpp, Line 1806
Speed measurement completed: 28.4x (39,310 KB/s)

7:47:01 PM #25 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 2.4x (3,324 KB/s)

7:47:01 PM #26 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

7:47:01 PM #27 Text 0 File DVDR.cpp, Line 2000
Recording mode: Sequential Recording Mode for Multisession

7:47:01 PM #28 Text 0 File Mmc.cpp, Line 20660
Set BUFE: JustLink -> ON

7:47:01 PM #29 Text 0 File DVDR.cpp, Line 2141
Start write address at LBA 0
DVD high compatibility mode: No

7:47:01 PM #30 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16…63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`…0@P…!..
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

7:47:01 PM #31 SCSI -1046 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x00 0x2F 0xF0 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

7:47:01 PM #32 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799
Illegal disc

7:47:01 PM #33 TRANSFER -16 File ThreadedTransferInterface.cpp, Line 1799
Could not perform StartTrack

7:47:02 PM #34 SCSI -1046 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0xEC 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

7:47:02 PM #35 CDR -1046 File WriterStatus.cpp, Line 245
Illegal disc

7:47:02 PM #36 TRANSFER -19 File WriterStatus.cpp, Line 245
Could not perform Fixation

7:47:02 PM #37 Text 0 File WriterStatus.cpp, Line 254
falling back to disc fixation

7:47:02 PM #38 SCSI -1046 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x00 0x00 0x00 0x6C 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

7:47:02 PM #39 CDR -1046 File WriterStatus.cpp, Line 245
Illegal disc

7:47:02 PM #40 TRANSFER -19 File WriterStatus.cpp, Line 245
Could not perform Fixation

7:47:02 PM #41 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

7:47:02 PM #42 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 2.4x (3,324 KB/s)

Existing drivers:
File ‘Drivers\ADPU160M.SYS’: Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 4:07:32 PM
File ‘Drivers\ASPI32.SYS’: Ver=4.57 (1008), size=23936 bytes, created 12/22/1997 6:02:46 PM
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.32a, size=20640 bytes, created 11/17/2005 12:19:28 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:44 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)