Nero Suite 7.0 Problems! Please help!

vbimport

#1

Hello everyone!

I would appreciate a little help, because i am getting frustrated with my PC!
I’ve been using Nero 6 for quite some time, and i decided to change to Nero 7 Premium 3 months ago. So i got Nero Premium Suite 7.0.8.2 from a friend and installed it, since i was in ignorance about all the problems reffering to the mp3 plugins and stuff i’ve been reading the last 3 hours in this forum. The thing is that i am having various problems with Nero lately and since i am not very familiar with the computer language i can’t fix them on my own.

When i try to burn or copy dvd discs i get lots of read errors (something at LBA 0) or extremely low buffer which ends up in failed burn process and ruined dvd disc. I also got this kind of error when i was using dvd shrink with nero! What can i do about it??

Also when i try to burn data discs, either cds or dvds, i get something like focus or tracking error. This also ends up to a ruined burn process! Can somebody telll me what this means??

My last question is this…should i uninstall Nero 7 and after a good clean up return to Nero 6, or should i get the new version from the official nero site Nero v.7.2.0.3b and everything will be ok!?

Any help would be greatly appreciated since i am not an expert on these stuff!!

Thanks a lot in advance!!


#2

If I was you I would uninstall Nero7 “COMPLETELY”. Use “Nero Clean Tool” (if you google it you’ll find it). After using the clean tool you should go to the registry and delete the folders that has “Ahead” or “Nero” it, and re-install Nero 7.0.8.2

But there’s also a newer version out Nero 7.2.0.3b


#3

And check also if DMA is enabled

http://club.cdfreaks.com/showthread.php?t=101616


#4

If you follow the advise of post #2 you will be fine plus you can get Nero Clean Tools from Nero site (www.nero.com).


#5

Thanks for the advice!
I will get to work and I will send feedback as soon as i get things working!


#6

Arghhhh!!! It’s still not working!

Here’s what i did:
1)Checked if DMA is enabled ->Ok
2)Unistalled Nero 7.0 completely from the system (including registry entries)->ok
3)Used Nero Clean Tool to remove all the Ahead & Nero Software->ok
4)Downloaded the brand new Nero Version 7.2.0.3b and re-installed->ok
5)Tried to copy 2 dvd discs into another dvds-> 1 ok 1 failed (unrecoverable read errors & tracking errors & focus errors)

There must be something wrong with Nero because i used clonedvd2 to copy the disc that has failed in Nero and everything worked fine!

This is the fail log:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3

Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-106D atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3160827AS atapi Port 2 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 0 DMA: Off
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 5 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163B E: CDRom0
PIONEER DVD-RW DVR-106D F: CDRom1
Generic DVD-ROM G: CDRom3
NERO IMAGEDRIVE2 H: CDRom2

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1021MB (1046252kB)
Free physical memory: 576MB (589888kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.5.2006
===== Disc-Copy over image - 1st step : Copy to image …

19:12:27 #1 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

19:12:27 #2 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the original disc.
(Medium in drive: Unknown. Medium required by compilation: DVD.)

19:12:28 #3 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

19:12:28 #4 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

19:12:28 #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 192KB of Memory

19:12:28 #6 Text 0 File Reader.cpp, Line 124
Reader running

19:12:28 #7 Text 0 File Writer.cpp, Line 113
Writer Image Recorder running

19:12:28 #8 Text 0 File DVDCopy.cpp, Line 292
DVD Track-Information from source disc:
Media Type: DVD+R
S01 T01 Con 0x14 Start 0 Len 2286096 (gap 0) Blank 0 Res 1 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

19:12:28 #9 Text 0 File DVDCopy.cpp, Line 405
Max -1 tracks of 1 allowed to copy
1: 0 - 2286096 = 2286096, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

19:12:28 #10 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media

19:12:29 #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 2286095 (508:01.20, 4465MB)

19:12:29 #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

19:12:29 #13 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

19:12:29 #14 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2286096 (2286096) = #2286096/508:1.21
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286096 blocks [Image Recorder]
--------------------------------------------------------------

19:12:29 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681924608, ISRC ""
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286096 | lead-out | 1 | 0x41 | 0x00

19:12:29 #16 Phase 120 File dlgbrnst.cpp, Line 1730
Creating the image for burning

19:12:29 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

19:12:29 #18 SPTI -1128 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0xF0 00 03 00 00 00 30 10 00 00 00 0E 11
Buffer x055ff000: Len x10000

19:12:29 #19 SPTI -1128 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 00 00 00 00 30 00 00 10 00 00 00
Sense Area: 0xF0 00 03 00 00 00 30 10 00 00 00 0E 11
Buffer x05607000: Len x8000

19:12:29 #20 SPTI -1128 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 00 00 00 00 50 00 00 10 00 00 00
Sense Area: 0xF0 00 03 00 00 00 50 10 00 00 00 0E 11
Buffer x055f5000: Len x8000

19:12:29 #21 CDCOPY -12 File DVDReader.cpp, Line 106
Unrecoverable read error at
LBA 48

19:20:14 #22 CDCOPY -12 File DVDReader.cpp, Line 106
Unrecoverable read error at
LBA 80

19:20:14 #23 Text 0 File WriterStatus.cpp, Line 116
<Image Recorder> start writing Lead-Out at LBA 2286096 (22E210h), length 0 blocks

19:20:14 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

19:20:15 #25 Phase 121 File dlgbrnst.cpp, Line 1730
Creating Image completed successfully

===== Disc-Copy over image - 2nd step : Burn the image …

19:20:21 #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

19:20:21 #2 Text 0 File Reader.cpp, Line 124
Reader running

19:20:21 #3 Text 0 File Writer.cpp, Line 113
Writer E: HL-DT-ST DVDRAM GSA-4163B running

19:20:21 #4 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1’
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4681924608
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=508:01.21 ( 2286096) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Administrator\My Documents\TempImage.nrg>

19:20:21 #5 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media

19:20:52 #6 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286095 (508:01.20, 4465MB)

19:20:52 #7 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

19:20:52 #8 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R
Disc Manufacturer ID: MBIPG101, Media Type ID: R04, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 3

19:20:52 #9 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW; DVD-RAM; DVD+R DL.)

19:20:52 #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 2286096 (2286096) = #2286096/508:1.21
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286096 blocks [E: HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------

19:20:52 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681924608, ISRC ""
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286096 | lead-out | 1 | 0x41 | 0x00

19:20:52 #12 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

19:20:52 #13 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

19:20:52 #14 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 8x (11.080 KB/s)

19:20:52 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

19:20:52 #16 Text 0 File Cdrdrv.cpp, Line 8914
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MBIPG101
Media type ID: R04
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16…63]:
00 00 03 4D 42 49 50 47 - 31 30 31 52 30 34 01 38 …MBIPG101R04.8
23 54 37 12 02 42 6E 02 - A8 6B 15 15 0B 0B 08 08 #T7…Bn…k…
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 …

19:20:52 #17 Text 0 File DVDR.cpp, Line 5746
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0

19:20:52 #18 CDR -1207 File DVDR.cpp, Line 5676
Book Type automatically set to: DVD-ROM

19:20:52 #19 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

19:22:25 #20 SPTI -1039 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1039)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 00 00 03 BF 60 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 10 35 01 00 0E 09 01
Buffer x03660000: Len x10000
0x00 00 01 BA 44 43 6E 27 85 E3 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 4A CA 99 B2 A6 3A A9 B8 95
0xB5 D5 53 53 96 CA 60 CA 93 EA 63 A9 BA 6A 4B 00

19:22:25 #21 CDR -1039 File Writer.cpp, Line 302
Focus or tracking error
E: HL-DT-ST DVDRAM GSA-4163B

19:22:25 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

19:22:25 #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

19:22:25 #24 SPTI -1039 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1039)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 04 00 00 00 00 10 35 01 00 0E 09 01

19:22:25 #25 Phase 127 File dlgbrnst.cpp, Line 1730
Generating DVD high compatibility borders

19:22:25 #26 CDR -1039 File WriterStatus.cpp, Line 167
Focus or tracking error
E: HL-DT-ST DVDRAM GSA-4163B

19:22:25 #27 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

19:22:25 #28 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 8x (11.080 KB/s)

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.28a, size=20640 bytes, created 5/12/2005 08:12:26 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3

Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-106D atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3160827AS atapi Port 2 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 0 DMA: Off
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 5 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163B E: CDRom0
PIONEER DVD-RW DVR-106D F: CDRom1
Generic DVD-ROM G: CDRom3
NERO IMAGEDRIVE2 H: CDRom2

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1021MB (1046252kB)
Free physical memory: 356MB (365104kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.5.2006
===== Disc-Copy over image - 1st step : Copy to image …

19:26:57 #1 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

19:26:57 #2 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the original disc.
(Medium in drive: Unknown. Medium required by compilation: DVD.)

19:26:58 #3 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

19:26:58 #4 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

19:26:58 #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 192KB of Memory

19:26:58 #6 Text 0 File Reader.cpp, Line 124
Reader running

19:26:58 #7 Text 0 File Writer.cpp, Line 113
Writer Image Recorder running

19:26:58 #8 Text 0 File DVDCopy.cpp, Line 292
DVD Track-Information from source disc:
Media Type: DVD+R
S01 T01 Con 0x14 Start 0 Len 2286096 (gap 0) Blank 0 Res 1 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

19:26:58 #9 Text 0 File DVDCopy.cpp, Line 405
Max -1 tracks of 1 allowed to copy
1: 0 - 2286096 = 2286096, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

19:26:58 #10 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media

19:26:58 #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 2286095 (508:01.20, 4465MB)

19:26:58 #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

19:26:58 #13 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

19:26:58 #14 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2286096 (2286096) = #2286096/508:1.21
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286096 blocks [Image Recorder]
--------------------------------------------------------------

19:26:58 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681924608, ISRC ""
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286096 | lead-out | 1 | 0x41 | 0x00

19:26:58 #16 Phase 120 File dlgbrnst.cpp, Line 1730
Creating the image for burning

19:26:58 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

19:33:48 #18 SPTI -1128 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 00 00 1D 24 40 00 00 20 00 00 00
Sense Area: 0xF0 00 03 00 1D 24 40 10 00 00 00 0E 11
Buffer x055f2000: Len x10000

19:33:48 #19 SPTI -1128 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 00 00 1D 24 40 00 00 10 00 00 00
Sense Area: 0xF0 00 03 00 1D 24 40 10 00 00 00 0E 11
Buffer x055f2000: Len x8000

19:33:48 #20 SPTI -1128 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 00 00 1D 27 10 00 00 10 00 00 00
Sense Area: 0xF0 00 03 00 1D 27 10 10 00 00 00 0E 11
Buffer x055fa000: Len x8000

19:33:48 #21 CDCOPY -12 File DVDReader.cpp, Line 106
Unrecoverable read error at
LBA 1909824

19:34:44 #22 CDCOPY -12 File DVDReader.cpp, Line 106
Unrecoverable read error at
LBA 1910544

19:34:44 #23 Text 0 File WriterStatus.cpp, Line 116
<Image Recorder> start writing Lead-Out at LBA 2286096 (22E210h), length 0 blocks

19:34:44 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

19:34:44 #25 Phase 121 File dlgbrnst.cpp, Line 1730
Creating Image completed successfully

===== Disc-Copy over image - 2nd step : Burn the image …

19:34:51 #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

19:34:51 #2 Text 0 File Reader.cpp, Line 124
Reader running

19:34:51 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1’
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4681924608
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=508:01.21 ( 2286096) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <D:\TempImage.nrg>

19:34:51 #4 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media

19:44:03 #5 Phase 40 File dlgbrnst.cpp, Line 1730
Aborted by user

19:44:03 #6 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

19:44:03 #7 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: HL-DT-ST DVDRAM GSA-4163B
Medium not present

19:44:03 #8 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW; DVD-RAM; DVD+R DL.)

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.28a, size=20640 bytes, created 5/12/2005 08:12:26 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


Please i desperately need some advice because i am driving nuts with this thing! It all begag going wrong with no reason !!

Thanks in advance!


#7

Then do the following:

  1. Remove your present Nero program (6 or 7 version) using Nero Clean Tools.
  2. Go to the registry and delete any ahead or Nero folder from both HKEY_CURRENT_USER & HKEY_LOCAL_MACHINE.
  3. Go to C:\All Program and delete Ahead or Nero Folder
  4. Go to C:\Document and Setting|userName|LocalSetting\Temp and delete the ahead or Nero folder or even delete complete Temp folder all together.
    Reboote your computer install Nero 6 (since you have valid key for it) and that like solves your problem.

Good Luck