Nero Stops Working at 85% or 100%

vbimport

#1

I’ve been burning a lot of data cds lately, because I wanted to free up some space on my harddrive. Yesterday all of the sudden, Nero stops working at 85% or 100%. It just freezes sometimes, but the last time I tried to burn a cd It had a bunch of errors. I burned cds at 40x before with Nero wth no problem, but when I burned ds today at 4X it works fine but at 40x it doesn’t. What’s the deal.

Here’s the log file I got to save.

eorge Pate
Home
1A23-0809-9030-2074-1105-6681

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <MITSUMI CR-48XGTE> Version: 1.0G - HA 3 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <MITSUMI CR-48XGTE >Version: 1.0G - HA 3 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-00EVA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : MITSUMI CR-48XGTE atapi Port 3 ID 0 DMA: On
CdRomPeripheral : ATAPI DVD DUAL 4XMax atapi Port 3 ID 1 DMA: On

=== CDRom-Device-Map ===
MITSUMI CR-48XGTE D: CDRom0
ATAPI DVD DUAL 4XMax E: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047216kB)
Free physical memory: 653MB (669156kB)
Memory in use : 36 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.8.2005
CD-ROM (ISO)
7:51:38 PM #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

7:51:38 PM #2 Text 0 File Burncd.cpp, Line 2882
MITSUMI CR-48XGTE
ExacLink activated

7:51:38 PM #3 Text 0 File Reader.cpp, Line 127
Reader running

7:51:38 PM #4 Text 0 File Writer.cpp, Line 122
Writer MITSUMI CR-48XGTE running

7:51:38 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

7:51:38 PM #6 Text 0 File Burncd.cpp, Line 3167
Turn on Track-At-Once, using CD-R/RW media

7:51:38 PM #7 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 347460 ( 77:14.60)

7:51:38 PM #8 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

7:51:38 PM #9 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: MITSUMI CR-48XGTE;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

7:51:38 PM #10 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

7:51:38 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 347461 (347461) = #347461/77:12.61
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 347459 blocks [MITSUMI CR-48XGTE]
--------------------------------------------------------------

7:51:38 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [MITSUMI CR-48XGTE] for write in TAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 711907328, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
347461 | lead-out | 1 | 0x41 | 0x00

7:51:38 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 2 run-out blocks from end of track 1. Length: 347461 -> 347459.

7:51:39 PM #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

7:51:39 PM #15 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.

7:51:39 PM #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

7:51:39 PM #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 40x (6,000 KB/s)

7:51:39 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

7:51:39 PM #19 Text 0 File Mmc.cpp, Line 21469
Set BUFE: ExacLink -> ON

7:55:12 PM #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

7:59:13 PM #21 SCSI -1169 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x03965E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x07
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x07

8:04:13 PM #22 TRANSFER -18 File ThreadedTransferInterface.cpp, Line 2054
Could not perform EndTrack

8:04:43 PM #23 CDR -1175 File Cdrdrv.cpp, Line 1240
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 55 10 00 00 00 00 00 00 3C 00 00 00

8:04:43 PM #24 SCSI -1169 File Cdrdrv.cpp, Line 1241
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x0012B068
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x07
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x07
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x41 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x

8:04:43 PM #25 CDR -1169 File WriterStatus.cpp, Line 249
Logical unit not ready, operation in progress

8:04:43 PM #26 TRANSFER -19 File WriterStatus.cpp, Line 249
Could not perform Fixation

8:04:43 PM #27 Text 0 File WriterStatus.cpp, Line 258
falling back to disc fixation

8:05:13 PM #28 CDR -1175 File Cdrdrv.cpp, Line 1240
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 55 10 00 00 00 00 00 00 3C 00 00 00

8:05:13 PM #29 SCSI -1169 File Cdrdrv.cpp, Line 1241
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x0012A988
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x07
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x07
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x41 0x04 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x

8:05:13 PM #30 CDR -1169 File WriterStatus.cpp, Line 249
Logical unit not ready, operation in progress

8:05:13 PM #31 TRANSFER -19 File WriterStatus.cpp, Line 249
Could not perform Fixation

8:05:43 PM #32 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 40x (6,000 KB/s)

8:06:13 PM #33 SCSI -1169 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x07
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x07

8:06:43 PM #34 CDR -1175 File Cdrdrv.cpp, Line 1240
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 1E 00 00 00 00 00 00 00 00 00 00 00

8:06:43 PM #35 SCSI -1169 File Cdrdrv.cpp, Line 1241
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x07
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x07

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.28a, size=20640 bytes, created 3/11/2005 6:28:09 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\InCDfs.SYS’: Ver=4, 3, 14, 1, size=99456 bytes, created 4/12/2005 11:07:50 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=4, 3, 14, 1, size=29056 bytes, created 4/12/2005 11:07:30 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=4, 3, 14, 1, size=8704 bytes, created 4/12/2005 11:07:54 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:44 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Thanks a lot. Any help is appericated.


#2

edit your post and remove your key.


#3

When I burn multisession i always use data iso level 2xa,File name length max of 31 characters(level 2),with iso level 1 nero doesnt recognise file format and errors.