Nero stops at 10% or 13%

Hello,

My burner used to work fine and Nero burned DVD-Rs properly as well. Lately, this hasn’t been the case and most of the time, the burning just halts at 10% or 13% (usually at these percentages)

Here’s the error log generated by Nero:

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 9.0.9.100
Internal Version: 9, 0, 9, 100
(Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-H652L>Version: 0803 - HA 1 TA 0 - 9.0.9.100
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <ASUS DVD-E616A2 >Version: CP02 - HA 1 TA 1 - 9.0.9.100
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
: WDC WD2500JS-60NCB1 10.0 nvstor32 Port 2 ID 0 DMA: Off
CdRomPeripheral : ULEN QJS1ENCH 1.03 aoag5z1m Port 5 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H652L E: CdRom0
ASUS DVD-E616A2 F: CdRom1
ULEN QJS1ENCH K: CdRom2

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048575kB)
Free physical memory: 964MB (987932kB)
Memory in use : 52 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.2.2009
UDF/ISO compilation
9:43:51 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

9:43:52 PM #2 Phase 112 File dlgbrnst.cpp, Line 1767
DVD-Video files reallocation started

9:43:52 PM #3 Phase 114 File dlgbrnst.cpp, Line 1767
DVD-Video files reallocation completed (no file modified)

9:43:52 PM #4 Text 0 File Isodoc.cpp, Line 6789
UDF document burn settings

Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

9:43:52 PM #5 Phase 111 File dlgbrnst.cpp, Line 1767
DVD-Video files sorted

9:43:52 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)

9:43:52 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)

9:43:52 PM #8 Text 0 File Burncd.cpp, Line 3563
Turn on Disc-At-Once, using DVD media

9:43:52 PM #9 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator ‘CUDFSettingsValidatorDVD’
ParamMode = ‘automatic’, changing UDF partition type from ‘physical’ to ‘physical’
Changing UDF revision from ‘1.02’ to ‘1.02’

9:43:52 PM #10 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)

9:43:52 PM #11 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)

9:43:52 PM #12 Text 0 File DlgWaitCD.cpp, Line 312
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1081967 (240:26.17, 2113MB)

9:43:52 PM #13 Text 0 File DlgWaitCD.cpp, Line 324
Write in overburning mode: NO (enabled: CD)

9:43:52 PM #14 Text 0 File DlgWaitCD.cpp, Line 2951
Recorder: TSSTcorp CD/DVDW TS-H652L, Media type: DVD-R
Disc Manufacturer ID: <DAXON0> <16S>
Disc Application Code: 64, Disc Physical Code: 193

9:43:52 PM #15 Text 0 File DlgWaitCD.cpp, Line 499
>>> Protocol of DlgWaitCD activities: <<<

9:43:52 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 756
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1081968 (1081968) = #1081968/240:26.18
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1081968 blocks [E: TSSTcorp CD/DVDW TS-H652L]

9:43:52 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 958
Prepare [E: TSSTcorp CD/DVDW TS-H652L] for write in CUE-sheet-DAO
DAO infos:

MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2215870464, ISRC “”
DAO layout:

__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1081968 | 0 | 0x00
1081968 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

9:43:52 PM #18 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

9:43:52 PM #19 Text 0 File Burncd.cpp, Line 4362
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

9:43:52 PM #20 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

9:43:52 PM #21 Text 0 File Burncd.cpp, Line 4484
Cache writing successful.

9:43:52 PM #22 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

9:43:52 PM #23 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 16x (22,160 KB/s)

9:43:52 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2675
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:43:52 PM #25 Text 0 File DVDR.cpp, Line 3259
Recording mode: Sequential Recording Mode

9:43:52 PM #26 Text 0 File DVDR.cpp, Line 3413
Start write address at LBA 0
DVD high compatibility mode: Yes

9:43:52 PM #27 Text 0 File Cdrdrv.cpp, Line 10187
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 0 h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0, Extended part version: 33
Start PSN of the Extra Border Zone: 0 h
Start PSN of Physical format information blocks in Extra Border Zone: 0 h
Media Specific [16…783]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`…0@P…!..
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
01 40 C1 FD 9E D8 52 00 - 02 84 0E 10 87 88 80 00 .@…R…
03 44 41 58 4F 4E 30 00 - 04 31 36 53 00 00 00 00 .DAXON0…16S…
05 88 80 00 00 00 01 00 - 06 09 0B 12 A8 88 90 00 …
07 88 80 00 00 00 00 00 - 08 06 13 0A 0E 08 04 00 …
09 96 06 0C 0B 70 88 00 - 0A 80 00 00 00 00 10 00 …p…
0B 08 18 17 B8 88 85 00 - 0C B6 79 0B B0 33 03 00 …y…3…
0D 30 00 D0 00 00 00 00 - 0E 0A 20 3B 37 29 1E 00 .0…;7)…
0F 50 1D 2B 15 AA B5 00 - 10 88 80 00 00 00 00 00 .P.+…
11 00 00 00 00 00 00 00 - 12 0A 2D 39 35 2B 1D 00 …-95+…
13 50 1F 2D 19 98 B5 00 - 14 88 80 00 00 00 00 00 .P.-…
15 00 00 00 00 00 00 00 - 16 09 3A 45 40 2E 27 00 …:E@.’.
17 80 21 2E 1F 78 B5 00 - 18 88 8C 00 0C 00 0C 00 …!..x…
19 00 00 00 00 00 00 00 - 1A 09 4F 47 46 38 26 00 …OGF8&.
1B 70 21 2D 1B 67 C5 00 - 1C 88 84 00 04 00 04 00 .p!-.g…
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

9:43:52 PM #28 Text 0 File DVDR.cpp, Line 3551
Reserved Track size: 1081968 (108270h, 2113MB) -> return code 0

9:43:52 PM #29 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

9:44:10 PM #30 Text 0 File Cdrdrv.cpp, Line 1411
21:44:10.002 - E: TSSTcorp CD/DVDW TS-H652L : Queue again later

9:54:49 PM #31 SPTI -1114 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
CDB Data: 0x2A 00 00 01 5C E0 00 00 20 00 00 00
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x19f63b00: Len x10000
0x00 00 01 BA 44 22 FF 64 94 AB 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 62 BD CE 51 D6 40 4C A2 C3
0xEC 20 7B 88 B6 81 42 4D 88 35 45 4C 0A 1D E3 D8

9:54:49 PM #32 CDR -1114 File Writer.cpp, Line 306
Reset occurred
E: TSSTcorp CD/DVDW TS-H652L

9:54:50 PM #33 Text 0 File DVDR.cpp, Line 3819
EndDAO: Last written address was 89311 (15CDFh)

9:54:50 PM #34 Text 0 File DVDPlusDualLayer.cpp, Line 1424
SetDriveCaps: Set LAST LBA of layer 1 to 0

9:54:50 PM #35 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 16x (22,160 KB/s)

9:54:50 PM #36 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

9:54:59 PM #37 Text 0 File Cdrdrv.cpp, Line 11444
DriveLocker: UnLockVolume completed

9:54:59 PM #38 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon

Turn on DMA.

Hi,[QUOTE=pfloyd1;2228022]Turn on DMA.[/QUOTE]Why do you think, DMA is not enabled?

I think, the problem is here:

9:54:49 PM #32 CDR -1114 File Writer.cpp, Line 306
[B]Reset occurred[/B]
E: TSSTcorp CD/DVDW TS-H652L

Perhaps some PSU related issue? :confused: No idea.

Michael

Try burning slower or use other media.