Nero Recode Burn Failure

vbimport

#1

Hello all, please bear with a newbie for a few moments, if you will. I have been using Nero Recode quite successfully for some time now. But, a couple nights ago I started getting burn errors every time I use it. The process works works perfectly up until about the last 30 seconds of burning, then stops, and I get “INVALID FIELD IN COMMAND, BURN PROCESS FAILED”. This NEVER happened to me before the other night, and since then I’ve made 5 coasters out of 5 dvds. The software has been reinstalled several times, and I have updated my drive’s firmware as well. One of the error logs is pasted below- any and all help would be greatly appreciated.

Thank You

********** Nero Recode 2 **********

Version: 2.0.0.18

<serial snipped>

Project type: Remake a DVD
Target size: DVD5 (2282925)

Burn settings:
Target: PLEXTOR DVDR PX-708A
Number of copies: 1
Write speed: 0 KB/s
Temp folder: E:\VIDEO_TS (39641559040 bytes free)
Direct burning: false
Target media: DVD
Shutdown when finished: false
Advanced Analysis: true

22:52:55 File burn_dvdfiles.cpp, Line 235
Compile DVD: init

VTS_01 Title Vobs [10589 vobus] 3156.66MB -> 2716.74MB [R 1.00]
Video: 2387.33MB, extra: 329.41MB
Audio: 3 streams
0. Dolby Digital 5.1-ch English 306.66MB [enabled]

  1. Dolby Digital 5.1-ch French 306.66MB [disabled]
  2. Dolby Digital 2-ch English 131.47MB [disabled]
    Subpicture: 2 streams
  3. English 2.07MB [enabled]
  4. French 1.79MB [disabled]

22:52:55 File burn_dvdfiles.cpp, Line 677
Compile DVD: begin deep analysis

23:12:39 File burn_dvdfiles.cpp, Line 765
Compile DVD: analysis changed size 2716.87MB -> 2743.30MB

23:12:39 File burn_dvdfiles.cpp, Line 649
Compile DVD: adjust target size to 2716.87MB (2716.87MB obtained)

23:12:39 File burn_dvdfiles.cpp, Line 1146
Compile DVD: begin copy 1

23:12:39 File burn_dvdfiles.cpp, Line 452
Compile DVD: burning 2282925 sectors (1391035 required)

23:12:39 File burn_dvdfiles.cpp, Line 649
Compile DVD: adjust target size to 4458.84MB (2743.30MB obtained)

23:12:39 File burn_dvdfiles.cpp, Line 522
Compiling DVD Volume started

23:32:33 File burn_dvdfiles.cpp, Line 1061
Compile DVD: finished VTS_01 Title Vobs

VTS_01 Title Vobs:
Original 3156.66MB -> Expected 2743.18MB -> Output 2743.18MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 10589
Slide encoded = 0
StillImage encoded = 0
Output extra size = 311.08MB
Source video size = 2432.10MB
Pictures Modified [I 0] [P 0] [B 0]

23:32:36 File burn_dvdfiles.cpp, Line 545
Compile DVD: completed successfuly (2743.30MB)

23:32:40 File NeroRecorderBase.cpp, Line 1099
Burning 7 files with total size of 2876563456 bytes on hard disk

23:32:40 File burn_dvdfiles.cpp, Line 1146
Compile DVD: begin copy 1

23:33:38 File NeroRecorderBase.cpp, Line 534
Writing to disc: DVD+R

1A23-0009-3030-1923-2385-5265

Windows XP 5.1

IA32

WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0001), size=45056 bytes, created 5/28/2003 6:53:46 PM

ahead WinASPI: File ‘D:\Programs\Ahead\NeroVision\NeroFiles\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM

Nero API version: 6.3.1.17

Using interface version: 6.3.0.6

Installed in: D:\Programs\Ahead\NeroVision\NeroFiles\

Application: Ahead\Nero Recode

Recorder: <PLEXTOR DVDR PX-708A> Version: 1.00 - HA 1 TA 0 - 6.3.1.17

Adapter driver: <atapi> HA 1

Drive buffer : 2048kB

Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===

DiskPeripheral : WDC WD1000BB-32CCB0 atapi Port 0 ID 0 DMA: On

DiskPeripheral : Maxtor 54098H8 atapi Port 0 ID 1 DMA: On

CdRomPeripheral : PLEXTOR DVDR PX-708A atapi Port 1 ID 0 DMA: On

CdRomPeripheral : PLEXTOR CD-R PX-320A atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===

PLEXTOR DVDR PX-708A G: CDRom0

PLEXTOR CD-R PX-320A H: CDRom1

=======================

AutoRun : 1

Excluded drive IDs:

WriteBufferSize: 83886080 (0) Byte

ShowDrvBufStat : 0

BUFE : 0

Physical memory : 1022MB (1047280kB)

Free physical memory: 636MB (651928kB)

Memory in use : 37

Uncached PFiles: 0x0

Use Static Write Speed Table: 0

Use Inquiry : 1

Global Bus Type: default (0)

Check supported media : Disabled (0)

28.7.2004

NeroAPI

11:33:38 PM #1 Phase 112 File APIProgress.cpp, Line 273

DVD-Video files reallocation started

11:33:38 PM #2 Phase 114 File APIProgress.cpp, Line 273

DVD-Video files reallocation completed (no file modified)

11:33:38 PM #3 Phase 111 File APIProgress.cpp, Line 273

DVD-Video files sorted

11:33:38 PM #4 Text 0 File Reader.cpp, Line 118

Reader running

11:33:38 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817

DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)

DRM: Beginning burn process.

11:33:38 PM #6 Text 0 File Writer.cpp, Line 124

Writer PLEXTOR  DVDR   PX-708A   running

11:33:38 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899

First writeable address = 0 (0x00000000)

11:33:38 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899

First writeable address = 0 (0x00000000)

11:33:38 PM #9 Text 0 File Burncd.cpp, Line 3172

Turn on Disc-At-Once, using DVD media

11:33:38 PM #10 Text 0 File DlgWaitCD.cpp, Line 245

Last possible write address on media:  2295103 (510:01.28, 4482MB)

Last address to be written:            1405119 (312:14.69, 2744MB)

11:33:38 PM #11 Text 0 File DlgWaitCD.cpp, Line 257

Write in overburning mode: NO (enabled: CD)

11:33:38 PM #12 Text 0 File DlgWaitCD.cpp, Line 2137

Recorder: PLEXTOR DVDR   PX-708A, Media type: DVD+R

11:33:38 PM #13 Text 0 File DlgWaitCD.cpp, Line 418

&gt;&gt;&gt; Protocol of DlgWaitCD activities: &lt;&lt;&lt;

=========================================

11:33:38 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813

Setup items (after recorder preparation)

 0: TRM_DATA_MODE1 (CTransferItem)

    2 indices, index0 (150) not provided

    original disc pos #0 + 1405120 (1405120) = #1405120/312:14.70

    relocatable, disc pos for caching/writing not required/required, no patch infos 

    -&gt; TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1405120 blocks [PLEXTOR  DVDR   PX-708A  ]

--------------------------------------------------------------

11:33:38 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984

Prepare recorder [PLEXTOR  DVDR   PX-708A  ] for write in CUE-sheet-DAO

DAO infos:

==========

 MCN: ""

 TOCType: 0x00; Session Closed, disc fixated

 Tracks 1 to 1:

   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    2877685760, ISRC ""

DAO layout:

===========

 __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_

       0 |  lead-in |   0 |   0x00 |  0x41

       0 |        1 |   0 |   0x00 |  0x41

       0 |        1 |   1 |   0x00 |  0x41

 1405120 | lead-out |   1 |   0x00 |  0x41

11:33:38 PM #16 Phase 24 File APIProgress.cpp, Line 273

Caching of files started

11:33:38 PM #17 Text 0 File Burncd.cpp, Line 4182

Cache writing successful.

11:33:38 PM #18 Phase 25 File APIProgress.cpp, Line 273

Caching of files completed

11:33:38 PM #19 Phase 36 File APIProgress.cpp, Line 273

Burn process started at 4x (5,540 KB/s)

11:33:38 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344

Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:33:38 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1188

SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02506000

Status:     0x04 (0x01, SCSI_ERR)

HA-Status   0x00 (0x00, OK)

TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)

Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x24

Sense Qual: 0x00

CDB Data:   0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 

Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 

            0x00 0x00 0x00 0x00 0x24 0x00 

11:33:38 PM #22 Text 0 File DVDPlusRW.cpp, Line 613

Start write address at LBA 0

DVD high compatibility mode: No

11:42:26 PM #23 Text 0 File WriterStatus.cpp, Line 115

&lt;PLEXTOR  DVDR   PX-708A  &gt; start writing Lead-Out at LBA 1405120 (1570C0h), lenght 0 blocks

11:42:26 PM #24 Text 0 File ThreadedTransfer.cpp, Line 229

all writers idle, stopping conversion

11:42:29 PM #25 SCSI -1066 File Cdrdrv.cpp, Line 1188

SCSI Exec, HA 1, TA 0, LUN 0

Status:     0x04 (0x01, SCSI_ERR)

HA-Status   0x00 (0x00, OK)

TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)

Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x24

Sense Qual: 0x00

CDB Data:   0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 

Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 

            0x00 0x00 0x00 0x00 0x24 0x00 

11:42:29 PM #26 SCSI -1066 File Cdrdrv.cpp, Line 1188

SCSI Exec, HA 1, TA 0, LUN 0

Status:     0x04 (0x01, SCSI_ERR)

HA-Status   0x00 (0x00, OK)

TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)

Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x24

Sense Qual: 0x00

CDB Data:   0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 

Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 

            0x00 0x00 0x00 0x00 0x24 0x00 

11:42:29 PM #27 CDR -1066 File ThreadedTransferInterface.cpp, Line 1708

Invalid field in command

11:42:29 PM #28 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1708

Could not perform end of Disc-at-once

11:42:29 PM #29 SCSI -1066 File Cdrdrv.cpp, Line 1188

SCSI Exec, HA 1, TA 0, LUN 0

Status:     0x04 (0x01, SCSI_ERR)

HA-Status   0x00 (0x00, OK)

TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)

Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x24

Sense Qual: 0x00

CDB Data:   0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 

Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 

            0x00 0x00 0x00 0x00 0x24 0x00 

11:42:29 PM #30 SCSI -1066 File Cdrdrv.cpp, Line 1188

SCSI Exec, HA 1, TA 0, LUN 0

Status:     0x04 (0x01, SCSI_ERR)

HA-Status   0x00 (0x00, OK)

TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)

Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x24

Sense Qual: 0x00

CDB Data:   0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 

Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 

            0x00 0x00 0x00 0x00 0x24 0x00 

11:42:29 PM #31 CDR -1066 File WriterStatus.cpp, Line 164

Invalid field in command

11:42:29 PM #32 TRANSFER -24 File WriterStatus.cpp, Line 164

Could not perform end of Disc-at-once

11:42:29 PM #33 Phase 38 File APIProgress.cpp, Line 273

Burn process failed at 4x (5,540 KB/s)

11:42:29 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 828

DRM: DRM burn session terminated.

11:42:29 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 857

DRM: Closing entire DRM handling. Bye.

Existing drivers:

File ‘Drivers\CDRALW2K.SYS’: Ver=6.0.0.171 , size=24839 bytes, created 1/13/2003 10:19:26 AM

File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0001), size=17005 bytes, created 5/28/2003 6:53:46 PM

Registry Keys:

HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

23:42:38 File NeroRecorder.cpp, Line 3072
Disc info:

23:42:38 File burn_dvdfiles.cpp, Line 304
Compile DVD: exit


#2

Your version of firmware for your burner is 1.0 - latest version is 1.07. Try to update your burner.

http://www.plextor.be/technicalservices/downloads/firmw_708a.asp?choice=DVD-Recorders