Nero problem

vbimport

#1

Hello everyone!
I have this big problem, happening at the totaly wrong time (school sucks) :sad: .
I already read most of this forum but realy can’t find a good solution.
I must say first i do not know much about computers, per example how to update an IDE driver is like higher logic to me, so please have patience.

I use windows xp, nero 6 edition (at least trying to), have a nec cd rom 3002a and teac cd-w524e writer.I guess the best thing to show my configuration is a log.
Whatever i try to burn (I use simulation cos i can’t afford any more blank cds)i get this:the used red buffer goes to 100, the process stops and i see the error message that says no seek complete, invalid write state, could not perform end track & simulation failed.I can not burn anything.
I don’t use copying directly from cd, i already tried the device troubleshooter but seems like my hardware is o.k.
Here is one of the many logs i saved

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘D:\aaaaaaaa
ero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 20:18:06
Nero version: 6.3.1.17
Recorder: <TEAC CD-W524E> Version: 1.0D - HA 1 TA 1 - 6.3.1.17
Adapter driver: <atapi> HA 1
Drive buffer : 1404kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC CD-ROM CD-3002A >Version: C000 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC CD-ROM CD-3002A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TEAC CD-W524E atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
_NEC CD-ROM CD-3002A E: CDRom0
TEAC CD-W524E F: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 59MB (60944kB)
Memory in use : 76 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

24.7.2004
CD-ROM (ISO)
19:03:12 #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

19:03:12 #2 Text 0 File Reader.cpp, Line 118
Reader running

19:03:12 #3 Text 0 File Writer.cpp, Line 124
Writer TEAC CD-W524E running

19:03:12 #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

19:03:12 #5 Text 0 File Burncd.cpp, Line 3172
Turn on Track-at-once, using CD-R/RW media

19:03:20 #6 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 356629 ( 79:17.04)

19:03:20 #7 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

19:03:20 #8 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: TEAC CD-W524E;
CDR code: 00 97 34 23; OSJ entry from: Mitsubishi Chemical
ATIP Data:
Special Info [hex] 1: C0 00 98, 2: 61 22 17 (LI 97:34.23), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 00 00 (invalid)

19:03:20 #9 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)

19:03:20 #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 356630 (356630) = #356630/79:15.5
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 356628 blocks [TEAC CD-W524E ]
--------------------------------------------------------------

19:03:20 #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TEAC CD-W524E ] for write in TAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 730685440, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
356630 | lead-out | 1 | 0x00 | 0x41

19:03:20 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1030
Removed 2 run-out blocks from end of track 1. Length: 356630 -> 356628.

19:03:20 #13 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started

19:03:20 #14 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.

19:03:20 #15 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed

19:03:20 #16 Phase 32 File dlgbrnst.cpp, Line 1845
Simulation started at 4x (600 KB/s)

19:03:20 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

19:03:20 #18 Text 0 File Mmc.cpp, Line 20401
Set BUFE: BURN-Proof -> OFF

19:04:41 #19 SCSI -1093 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x05830000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x06
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x01 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x06 0x00

19:04:41 #20 CDR -1093 File Writer.cpp, Line 304
No seek complete

19:04:41 #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

19:04:41 #22 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

19:04:42 #23 CDR -201 File WriterStatus.cpp, Line 154
Invalid write state
TEAC CD-W524E\H1 T1

19:04:42 #24 TRANSFER -18 File WriterStatus.cpp, Line 154
Could not perform EndTrack

19:04:42 #25 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

19:04:42 #26 Phase 34 File dlgbrnst.cpp, Line 1845
Simulation failed at 4x (600 KB/s)

Existing drivers:
File ‘Drivers\atapi.sys’: Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 8/23/2001 14:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon

Thank you sooo much if you take time to help me. :bow:


#2

Free physical memory: 59MB. i would make sure all unneeded programs are shutdown before burning. open taskmanager and end process on any apps running in background you don’t need. also, is DMA enabled on both devices ? http://www.2e.org/dma.htm & http://www.blackmaxpc.com/Guides/Enable_DMA.htm also look for fimware update for cd-w524e @ http://forum.rpc1.org/dl_all.php#T

Sun Oct 06, 2002 4:00 pm Teac CD-W524E
Teac CD-W524E (24/10/40) - 1.0C, 1.0D, 1.0E


#3

Must I download all three ( 1.0C, 1.0D, 1.0E) to update firmware?Or only one of those?


#4

OMG. that you need to ask that has me worried. the latest will be 1.0E so just download it. don’t do a thing if you are not sure how to proceed. ask/read here or at those sites i linked to.