Nero failed to start burning

I think similiar problem was asked for many times, but I haven’t found solution yet. This happens after I reinstalled windows due to secondary IDE stuck with PIO. Before it, my optorite dd1205 was burning fine with nero 6.6.0.1.

After windows reinstallation, though the ide speed problem solved, nero keeps having burning error (can’t even start burning).
same drive, same version of nero, and same type of media (dvd+r).

Please help if anyone knows why.

Below is the error log:

14.11.2004
ISO compilation
7:32:24 PM #1 Text 0 File Isodoc.cpp, Line 6165
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : Multibyte
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

7:32:24 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

7:32:24 PM #3 Text 0 File Writer.cpp, Line 122
Writer OPTORITE DVD RW DD1205 running

7:32:24 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

7:32:24 PM #5 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media

7:32:24 PM #6 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2238255 (497:23.30, 4371MB)

7:32:24 PM #7 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD DVD)

7:32:24 PM #8 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: OPTORITE DVD RW DD1205, Media type: DVD+R
Disc Manufacturer ID: LONGTEN, Media Type ID: 002, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1

7:32:24 PM #9 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

7:32:24 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2238256 (2238256) = #2238256/497:23.31
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2238256 blocks [OPTORITE DVD RW DD1205]
--------------------------------------------------------------

7:32:24 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [OPTORITE DVD RW DD1205] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4583948288, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2238256 | lead-out | 1 | 0x00 | 0x41

7:32:24 PM #12 Phase 24 File dlgbrnst.cpp, Line 1853
Caching of files started

7:32:24 PM #13 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.

7:32:24 PM #14 Phase 25 File dlgbrnst.cpp, Line 1853
Caching of files completed

7:32:24 PM #15 Phase 32 File dlgbrnst.cpp, Line 1853
Simulation started at 8x (11,080 KB/s)

7:32:24 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

7:32:24 PM #17 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: LONGTEN.
Media type ID: 002
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16…63]:
00 00 01 4C 4F 4E 47 54 - 45 4E 00 30 30 32 00 38 …LONGTEN.002.8
23 54 37 09 00 3C 67 00 - AC 62 16 18 0B 0B 0A 0B #T7…<g…b…
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 …

7:32:24 PM #18 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 7:02,695 (422695ms) -> OK

7:32:24 PM #19 Text 0 File DVDPlusRW.cpp, Line 632
Start write address at LBA 0
DVD high compatibility mode: Yes

7:39:40 PM #20 Text 0 File WriterStatus.cpp, Line 116
<OPTORITE DVD RW DD1205 > start writing Lead-Out at LBA 2238256 (222730h), lenght 0 blocks

7:39:40 PM #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

7:40:12 PM #22 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

7:40:12 PM #23 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

7:40:12 PM #24 Phase 33 File dlgbrnst.cpp, Line 1853
Simulation completed successfully at 8x (11,080 KB/s)

7:40:13 PM #25 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 8x (11,080 KB/s)

7:40:13 PM #26 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

7:40:13 PM #27 CDR -1066 File ThreadedTransferInterface.cpp, Line 1674
Invalid field in command
OPTORITE DVD RW DD1205\H1 T1

7:40:13 PM #28 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1674
Invalid track info

7:40:13 PM #29 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

7:40:13 PM #30 Phase 38 File dlgbrnst.cpp, Line 1853
Burn process failed at 8x (11,080 KB/s)

What? no one has any suggestion?

Anyway, I found that I can burn directly without start simulation first.
But once start simulation first, burn cannot continue in next action.