Nero Burn Error Please Help

vbimport

#1

Is there anyone out there that can tell me why I keep getting this burn error with Nero. I’ve included the log file. I’ve tried everything from upgrading with the cleaner and adding nerovision to editing the ifo files with the editor. It always says Burn Process Failed at 2x (3,324 KB/s) :confused: I’m using brand new Memorex DVD-r discsthat are 4.7GB 16x 120 min. I also tried Nero SmartStart. It went through the entire analysis of the movie and then rejected the burn. I’m desperate at this point. :iagree: All suggestions are appreciated! Thanks in adance. :rolleyes:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero version: 6.6.0.3 (Nero Express)
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.05 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD_RW ND-1300A >Version: 1.05 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 2F040L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-00GVC0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-1300A F: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 630MB (646120kB)
Free physical memory: 304MB (311608kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

22.4.2006
UDF/ISO compilation
1:40:57 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

1:40:57 AM #2 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VIDEO_TS.IFO has been modified

1:40:57 AM #3 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VIDEO_TS.BUP has been modified

1:40:57 AM #4 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VTS_01_0.IFO has been modified

1:40:57 AM #5 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VTS_01_0.BUP has been modified

1:40:57 AM #6 Phase 113 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed

1:40:57 AM #7 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

1:40:57 AM #8 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

1:40:57 AM #9 Text 0 File Reader.cpp, Line 127
Reader running

1:40:57 AM #10 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

1:40:57 AM #11 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

1:40:57 AM #12 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-at-once, using DVD media

1:40:57 AM #13 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1764553 (392:07.28, 3446MB)

1:40:57 AM #14 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

1:40:57 AM #15 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193

1:40:57 AM #16 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

1:40:57 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1764704 (1764704) = #1764704/392:9.29
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1764704 blocks [_NEC DVD_RW ND-1300A]
--------------------------------------------------------------

1:40:57 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3614113792, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep
____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1764704 | lead-out | 1 | 0x41 | 0x00

1:40:58 AM #19 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

1:40:58 AM #20 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.

1:40:58 AM #21 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

1:40:58 AM #22 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)

1:40:58 AM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

1:40:58 AM #24 Text 0 File DVDR.cpp, Line 2248
Recording mode: Sequential Recording Mode

1:40:58 AM #25 Text 0 File Mmc.cpp, Line 21025
Set BUFE: Buffer underrun protection -> ON

1:40:58 AM #26 Text 0 File DVDR.cpp, Line 2389
Start write address at LBA 0
DVD high compatibility mode: Yes

1:40:58 AM #27 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16…63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`…0@P…!..
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

1:40:58 AM #28 SCSI -1046 File Cdrdrv.cpp, Line 1176
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x1A 0xED 0x60 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

1:40:58 AM #29 CDR -1046 File ThreadedTransferInterface.cpp, Line 1756
Illegal disc

1:40:58 AM #30 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1756
Could not perform start of Disc-at-once

1:40:58 AM #31 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)

Existing drivers:
File ‘Drivers\atapi.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#2

I suppose I should also note that the files I am trying to copy were created by DVD Decrypter.


#3

A big problem for you is that DMA is not enabled on your NEC1300. Check out this thread to fix that.

Have you successfully burned this particular media before or is it your first attempt?


#4

The error message is usually caused by old firmware for the Recorder: NEC DVD_RW ND-1300A> Version: 1.05 updates can be found at Nec’s web page. Also try another brand of media like TDK, Fuji or Ricoh DVD media and lastly download the free Nero 6 updates on the following page-http://ww2.nero.com/nero6/enu/nero-up.php


#5

Thanks for your help. I’m going to try enabling that. This is my first attempt. I never knew it was going to be so complicated. I’m used to burning cds and that task is a piece of cake compared to this.


#6

I went to device manager and followed the thread info that was posted. My computer, for what ever reason, insists that DMA was already enabled. I’m trying the updates from ww2.nero now to see what happens.


#7

OK I did all of that and am still getting the burn error. Here is my new log.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d

Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0B - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <_NEC DVD_RW ND-1300A >Version: 1.0B - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 2F040L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-00GVC0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
_NEC DVD_RW ND-1300A F: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 630MB (646120kB)
Free physical memory: 249MB (255400kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

22.4.2006
UDF/ISO compilation
3:02:50 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started

3:02:50 PM #2 Text 0 File DVDVideoCompilation.cpp, Line 561
Content of VIDEO_TS.IFO has been modified

3:02:50 PM #3 Text 0 File DVDVideoCompilation.cpp, Line 561
Content of VIDEO_TS.BUP has been modified

3:02:50 PM #4 Text 0 File DVDVideoCompilation.cpp, Line 561
Content of VTS_01_0.IFO has been modified

3:02:50 PM #5 Text 0 File DVDVideoCompilation.cpp, Line 561
Content of VTS_01_0.BUP has been modified

3:02:50 PM #6 Phase 113 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed

3:02:50 PM #7 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

3:02:50 PM #8 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted

3:02:50 PM #9 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

3:02:50 PM #10 Text 0 File Reader.cpp, Line 124
Reader running

3:02:51 PM #11 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

3:02:51 PM #12 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

3:02:51 PM #13 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

3:02:51 PM #14 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1764703 (392:09.28, 3446MB)

3:02:51 PM #15 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

3:02:51 PM #16 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193

3:02:51 PM #17 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

3:02:51 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1764704 (1764704) = #1764704/392:9.29
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1764704 blocks [_NEC DVD_RW ND-1300A]
--------------------------------------------------------------

3:02:51 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3614113792, ISRC ""
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep
____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1764704 | lead-out | 1 | 0x41 | 0x00

3:02:51 PM #20 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

3:02:51 PM #21 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

3:02:51 PM #22 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

3:02:51 PM #23 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

3:02:51 PM #24 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

3:02:51 PM #25 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 2.4x (3,324 KB/s)

3:02:51 PM #26 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

3:02:51 PM #27 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode

3:02:51 PM #28 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes

3:02:51 PM #29 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16…63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`…0@P…!..
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

3:02:51 PM #30 SPTI -1046 File SCSIPassThrough.cpp, Line 289
F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 00 00 00 00 00 1A ED 60 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

3:02:51 PM #31 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799
Illegal disc
F: _NEC DVD_RW ND-1300A

3:02:51 PM #32 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
Could not perform start of Disc-at-once

3:02:51 PM #33 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 2.4x (3,324 KB/s)

Existing drivers:
File ‘Drivers\InCDfs.SYS’: Ver=4, 3, 23, 2, size=102016 bytes, created 3/23/2006 5:15:58 PM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=4, 3, 23, 2, size=29440 bytes, created 3/23/2006 5:15:56 PM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=4, 3, 23, 2, size=8704 bytes, created 3/23/2006 5:00:28 PM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#8

I see the log says DMA off, but right before I tried to burn I ran Nero Info tool and it said DMA on.


#9

Actually, I just ran it again and it says it’s on. I’m so confused.


#10

I missed the fact that these were 16x discs.

I guess there’s just no way that the 1300 being an old 4x burner will ever recognise these modern high speed disks.

You might get away with 8x media & probably better to go for +R rather than -R.

You could try a search here for ND1300 as I recall that several members are still successfully using the 1100 & 1300 burners.