Nero 7 Essentials: Could not perform end of Disc-at-once

At the end of burning a CD i get that error. Log.txt below:

me
Hewlett-Packard
censored serial

Windows XP 6.0
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=169792 bytes, created 04/05/2007 10:35:40

NT-SPTI used
Nero Version: 7.5.13.1
Internal Version: 7, 5, 13, 1
(Nero Express)
Recorder: <TSSTcorp CDDVDW TS-L632N>Version: 0503 - HA 1 TA 0 - 7.5.13.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CDDVDW TS-L632N >Version: 0503 - HA 1 TA 0 - 7.5.13.1
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200BEVS-60UST0 iaStor Port 0 ID 0 DMA: On

=== CDRom-Device-Map ===
TSSTcorp CDDVDW TS-L632N E: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2037MB (2086164kB)
Free physical memory: 970MB (994004kB)
Memory in use : 52 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

2.3.2009
CD Image
14:52:04 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

14:52:04 #2 Text 0 File Burncd.cpp, Line 3156
TSSTcorp CDDVDW TS-L632N
Super Link activated

14:52:04 #3 Text 0 File Burncd.cpp, Line 3467
Turn on Disc-At-Once, using CD-R/RW media

14:52:05 #4 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 216946 ( 48:14.46)

14:52:05 #5 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

14:52:05 #6 Text 0 File DlgWaitCD.cpp, Line 2929
Recorder: TSSTcorp CDDVDW TS-L632N;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

14:52:05 #7 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

14:52:05 #8 Text 0 File ThreadedTransferInterface.cpp, Line 792
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 216947 (216947) = #216947/48:12.47
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 216797 blocks [E: TSSTcorp CDDVDW TS-L632N]
--------------------------------------------------------------

14:52:05 #9 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: TSSTcorp CDDVDW TS-L632N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 444614656, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 216947 | 216647 | 0x00
0 | 1 | 1 | 0x41 | 216947 | 216797 | 0x00
216947 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

14:52:05 #10 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

14:52:05 #11 Phase 24 File dlgbrnst.cpp, Line 1760
Caching of files started

14:52:05 #12 Text 0 File Burncd.cpp, Line 4351
Cache writing successful.

14:52:05 #13 Phase 25 File dlgbrnst.cpp, Line 1760
Caching of files completed

14:52:05 #14 Phase 36 File dlgbrnst.cpp, Line 1760
Burn process started at 24x (3,600 KB/s)

14:52:05 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

14:52:05 #16 Text 0 File MMC.cpp, Line 17599
StartDAO : CD-Text - Off

14:52:05 #17 Text 0 File MMC.cpp, Line 22275
Set BUFE: Super Link -> ON

14:52:05 #18 Text 0 File MMC.cpp, Line 17827
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 30 0e 2f

14:55:32 #19 Text 0 File WriterStatus.cpp, Line 113
<E: TSSTcorp CDDVDW TS-L632N> start writing Lead-Out at LBA 216797 (34EDDh), length 0 blocks

14:56:29 #20 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C

14:56:29 #21 CDR -1135 File ThreadedTransferInterface.cpp, Line 1891
Write error
E: TSSTcorp CDDVDW TS-L632N

14:56:29 #22 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1891
Could not perform end of Disc-at-once

14:56:29 #23 CDR -201 File WriterStatus.cpp, Line 162
Invalid write state
E: TSSTcorp CDDVDW TS-L632N

14:56:29 #24 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

14:56:29 #25 SPTI -1023 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1023)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x55 10 00 00 00 00 00 00 3C 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 2C
Buffer x05279300: Len x3c
0x00 00 00 00 00 00 00 00 05 32 01 C4 08 00 00 00
0x00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

14:56:29 #26 Phase 38 File dlgbrnst.cpp, Line 1760
Burn process failed at 24x (3,600 KB/s)

14:56:30 #27 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

14:56:30 #28 SPTI -1169 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 80 FF FF

14:56:30 #29 SPTI -1169 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 80 FF FF

14:56:30 #30 Text 0 File Cdrdrv.cpp, Line 10538
DriveLocker: UnLockVolume completed

14:56:30 #31 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:
File ‘Drivers\ADPU160M.SYS’: Ver=6.4.645.100 (NT.070221-1001), size=101432 bytes, created 21/01/2008 02:23:26
File ‘Drivers\InCDfs.SYS’: Ver=5, 5, 0, 11, size=108592 bytes, created 04/05/2007 10:35:52 (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=5, 5, 0, 11, size=37040 bytes, created 04/05/2007 10:35:58 (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.’: Ver=5, 5, 0, 11, size=16304 bytes, created 04/05/2007 10:35:58 (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon


EEp. Help please :slight_smile:

Bump.

Does anyone have a solution?

Upgrade to Nero 7.11.10.0:

Try updating your Nero version like negritude suggests:

Your first error shows this: Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Using these CD-R’s: CMC Magnetics Corporation
And trying to burn them at this speed: Burn process started at 24x (3,600 KB/s)
Just is not getting the job done.

You can try burning those at a slower speed like maybe 8x or 16x and see the result. If that doesn’t work try some Verbatim or Tayio Yuden CD-R’s.