Nero 7 Essentials burning error

vbimport

#1

Hello,

I recently purchased a Samsung Super Writemaster and when I went to copy a DVD for the first time, the following error message came up. It said “command sequence error” and “could not perform start track” I’ve tried twice now (thinking it was a bad DVD) and got the same error both times. I’m copying from a generic DVD-R (from a copymaster store) to a Sony DVD-R.

Please help! Thanks!

Here’s the error code:

4C87-200M-4045-E10K-000X-X640-0800-3X00-0000-4072-6K9C-**** (*)
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.9.6.4
Internal Version: 7, 9, 6, 4
(Nero Express)
Recorder: <TSSTcorp CDDVDW SH-S202N>Version: SB01 - HA 1 TA 1 - 7.9.6.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CDDVDW SH-S202N >Version: SB01 - HA 1 TA 1 - 7.9.6.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 2F040L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 4R120L0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8481B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CDDVDW SH-S202N atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8481B D: CdRom0
TSSTcorp CDDVDW SH-S202N E: CdRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1022MB (1046528kB)
Free physical memory: 541MB (554664kB)
Memory in use : 46 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
7.5.2008
===== Disc-Copy over image - 1st step : Copy to image …
2:22:02 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

2:22:02 PM #2 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

2:22:02 PM #3 Text 0 File DVDCopy.cpp, Line 320
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 20464 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
S01 T02 Con 0x14 Start 20480 Len 176 NWA -1 (gap 16) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
S01 T03 Con 0x14 Start 20672 Len 1208672 NWA -1 (gap 16) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
S01 T04 Con 0x14 Start 1229360 Len 16 NWA -1 (gap 16) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

2:22:02 PM #4 Text 0 File DVDCopy.cpp, Line 435
Max -1 tracks of 4 allowed to copy
1: 0 - 20464 = 20464, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
2: 20480 - 20656 = 176, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
3: 20672 - 1229344 = 1208672, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
4: 1229360 - 1229376 = 16, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

2:22:02 PM #5 Text 0 File Burncd.cpp, Line 3508
Turn on Track-At-Once, using DVD-R/RW media

2:22:02 PM #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2621439 (582:32.39, 5119MB)
Last address to be written: 1229375 (273:11.50, 2401MB)

2:22:02 PM #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

2:22:02 PM #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<

2:22:02 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 20480 (20480) = #20480/4:33.5
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 20480 blocks [Image Recorder]
1: TRM_DATA_MODE1 (2 - Data (mode 1))
2 indices, index0 (0) not provided
original disc pos #20480 + 192 (192) = #20672/4:35.47
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 192 blocks [Image Recorder]
2: TRM_DATA_MODE1 (3 - Data (mode 1))
2 indices, index0 (0) not provided
original disc pos #20672 + 1208688 (1208688) = #1229360/273:11.35
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1208688 blocks [Image Recorder]
3: TRM_DATA_MODE1 (4 - Data (mode 1))
2 indices, index0 (0) not provided
original disc pos #1229360 + 16 (16) = #1229376/273:11.51
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 16 blocks [Image Recorder]

2:22:02 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [Image Recorder] for write in TAO
DAO infos:

MCN: “”
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 4: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 41943040, ISRC “”
2: TRM_DATA_MODE1, 2048/0x00, FilePos 41943040 41943040 42336256, ISRC “”
3: TRM_DATA_MODE1, 2048/0x00, FilePos 42336256 42336256 2517729280, ISRC “”
4: TRM_DATA_MODE1, 2048/0x00, FilePos 2517729280 2517729280 2517762048, ISRC “”
DAO layout:

__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 20480 | 20480 | 0x00
20480 | 2 | 0 | 0x41 | 0 | 0 | 0x00
20480 | 2 | 1 | 0x41 | 192 | 20672 | 0x00
20672 | 3 | 0 | 0x41 | 0 | 0 | 0x00
20672 | 3 | 1 | 0x41 | 1208688 | 1229360 | 0x00
1229360 | 4 | 0 | 0x41 | 0 | 0 | 0x00
1229360 | 4 | 1 | 0x41 | 16 | 1229376 | 0x00
1229376 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

2:22:02 PM #11 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-No, small files-No (<64KB)

2:22:02 PM #12 Phase 120 File dlgbrnst.cpp, Line 1762
Creating the image for burning

2:22:02 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

2:22:02 PM #14 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 590400

2:22:14 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #20480): write at #20480

2:22:17 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 2 (not relocatable, no disc pos, no patch infos, orig at #20672): write at #20672

2:25:52 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 3 (not relocatable, no disc pos, no patch infos, orig at #1229360): write at #1229360

2:25:52 PM #18 Phase 121 File dlgbrnst.cpp, Line 1762
Creating Image completed successfully

2:25:53 PM #19 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

2:25:57 PM #20 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

2:25:57 PM #21 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

===== Disc-Copy over image - 2nd step : Burn the image …
2:25:57 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

2:25:57 PM #2 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as TAO.
MTYP: Mediumtype = DVD-R/RW (0x6)
Image file name: <C:\Documents and Settings\Don Fisher\My Documents\TempImage.nrg>

2:25:57 PM #3 Text 0 File Burncd.cpp, Line 3508
Turn on Track-At-Once, using DVD-R/RW media

2:26:30 PM #4 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1229375 (273:11.50, 2401MB)

2:26:30 PM #5 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

2:26:30 PM #6 Text 0 File DlgWaitCD.cpp, Line 2964
Recorder: TSSTcorp CDDVDW SH-S202N, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193

2:26:30 PM #7 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<

Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD-R/RW.)

2:26:30 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 20480 (20480) = #20480/4:33.5
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 20464 blocks [E: TSSTcorp CDDVDW SH-S202N]
1: TRM_DATA_MODE1 (2 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #20480 + 192 (192) = #20672/4:35.47
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 176 blocks [E: TSSTcorp CDDVDW SH-S202N]
2: TRM_DATA_MODE1 (3 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #20672 + 1208688 (1208688) = #1229360/273:11.35
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1208672 blocks [E: TSSTcorp CDDVDW SH-S202N]
3: TRM_DATA_MODE1 (4 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #1229360 + 16 (16) = #1229376/273:11.51
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 16 blocks [E: TSSTcorp CDDVDW SH-S202N]

2:26:30 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: TSSTcorp CDDVDW SH-S202N] for write in TAO
DAO infos:

MCN: “”
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 4: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 41943040, ISRC “”
2: TRM_DATA_MODE1, 2048/0x00, FilePos 41943040 41943040 42336256, ISRC “”
3: TRM_DATA_MODE1, 2048/0x00, FilePos 42336256 42336256 2517729280, ISRC “”
4: TRM_DATA_MODE1, 2048/0x00, FilePos 2517729280 2517729280 2517762048, ISRC “”
DAO layout:

__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 20480 | 20480 | 0x00
20480 | 2 | 0 | 0x41 | 0 | 0 | 0x00
20480 | 2 | 1 | 0x41 | 192 | 20672 | 0x00
20672 | 3 | 0 | 0x41 | 0 | 0 | 0x00
20672 | 3 | 1 | 0x41 | 1208688 | 1229360 | 0x00
1229360 | 4 | 0 | 0x41 | 0 | 0 | 0x00
1229360 | 4 | 1 | 0x41 | 16 | 1229376 | 0x00
1229376 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

2:26:30 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 16 run-out blocks from end of track 1. Length: 20480 -> 20464.

2:26:30 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 16 run-out blocks from end of track 2. Length: 192 -> 176.

2:26:30 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 16 run-out blocks from end of track 3. Length: 1208688 -> 1208672.

2:26:30 PM #13 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

2:26:30 PM #14 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-No, small files-No (<64KB)

2:26:30 PM #15 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 18x (24,930 KB/s)

2:26:30 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

2:26:30 PM #17 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode for Multisession

2:26:30 PM #18 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: No

2:26:30 PM #19 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`…0@P…!..
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

2:26:30 PM #20 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

2:26:44 PM #21 Text 0 File Cdrdrv.cpp, Line 1352
14:26:44.109 - E: TSSTcorp CDDVDW SH-S202N : Queue again later

2:26:58 PM #22 Text 0 File DVDMinusRW.cpp, Line 588
EndTrack 1: Last written address was 20463

2:26:58 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #20480): write at #20480

2:26:58 PM #24 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode for Multisession

2:26:58 PM #25 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 20480
DVD high compatibility mode: No

2:26:58 PM #26 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`…0@P…!..
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

2:27:08 PM #27 Text 0 File DVDMinusRW.cpp, Line 588
EndTrack 2: Last written address was 20655

2:27:08 PM #28 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 2 (not relocatable, no disc pos, no patch infos, orig at #20672): write at #20672

2:27:08 PM #29 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode for Multisession

2:27:08 PM #30 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 20672
DVD high compatibility mode: No

2:27:08 PM #31 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`…0@P…!..
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

2:27:08 PM #32 SPTI -1023 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1023)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x53 00 00 00 00 00 12 71 60 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 2C

2:27:08 PM #33 CDR -1023 File ThreadedTransferInterface.cpp, Line 2052
Command sequence error
E: TSSTcorp CDDVDW SH-S202N

2:27:08 PM #34 TRANSFER -16 File ThreadedTransferInterface.cpp, Line 2052
Could not perform StartTrack

2:27:08 PM #35 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 18x (24,930 KB/s)

2:27:08 PM #36 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

2:27:12 PM #37 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

2:27:12 PM #38 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)