Nero 7.8.5.0 could not perform start of disc at once

vbimport

#1

OK, I’d like to start by apologizing for this being my first post ever. I actually though I was already a member because I’ve used this forum to solve problems a ton of times. I guess this is the first time I’ve needed to post.

When I try to burn a Dual Layer DVD movie (actual dvd video files) I get the "could not perform start of disc-at-once error. I can burn 4.7Gb DVD movies fine as well as data DVDs and CDs I’m using a Pioneer DVD-RW DVR-111D with current firmware. As my title says, Nero 7.8.5.0. I’m using Memorex DVD+RW DL which i have used before. Is there a difference between the ones you get in a spindle and the ones you get buying a 3 pack in jewel cases?

Any hlp would rule. Even if it’s just directing me to a prior thread. You people are the best!

-Andy


#2

Welcome apop32, most people here try to steer clear of Memoxex D/L media, and buy the Verbatim Made in Singapore D/L media, that said, I am not sure that this is your problem as you are using an old version of Nero. I cannot reproduce this error using Nero 8. Hope this helps a little. Happy Easter.


#3

Thanks for the quick reply. I updated to Nero 8 and I did have the same problem. Also I just didn’t like the interface, so i went back to tried and true 7. Like I said, this is a new problem, as I did burn at least 4 DL dvds a few weeks ago for my nephew and I’m 99.9% sure they were the same DVDs. I’m looking at the jewel case they came in next to the spindle i have. I’ll look into verbatim, but these dvds were on sale :slight_smile: that’s always a big factor.


#4

You could try using Recode with this setting



#5

Nope. It compiled succesfully, but then there was a power calibration error and the same disc-at-once error.


#6

Have you tried a different batch of media, just guessing now. Trying to help.:wink:


#7

The only thing that doesn’t want to work is the Dual Layer DVD. I’ve burned a single layer movie and data to both DVD and CD as well as audio to a CD (all different brands though…maybe this is the problem, but like I said, less than a month ago, I burned DVD files to these same discs.) I’m gonna try data to a dual layer now. Maybe i’ll just buy a new burner when my bush money comes.

Edit: Didn’t work with data either. Many thanks for all your help.


#8

[QUOTE=apop32;2025057]OK, I’d like to start by apologizing for this being my first post ever. I actually though I was already a member because I’ve used this forum to solve problems a ton of times. I guess this is the first time I’ve needed to post.

When I try to burn a Dual Layer DVD movie (actual dvd video files) I get the "could not perform start of disc-at-once error. I can burn 4.7Gb DVD movies fine as well as data DVDs and CDs I’m using a Pioneer DVD-RW DVR-111D with current firmware. As my title says, Nero 7.8.5.0. I’m using [B]Memorex DVD+RW DL[/B] which i have used before. Is there a difference between the ones you get in a spindle and the ones you get buying a 3 pack in jewel cases?

Any hlp would rule. Even if it’s just directing me to a prior thread. You people are the best!

-Andy[/QUOTE]

Such media does not exist and Memowrecks is cheap media…

Don’t even try to burn that DL at 8x again! TRY AT 4x!

10:20:18 AM #20 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 8x (11,080 KB/s)


#9

[quote=chef;2025546]Such media does not exist and Memowrecks is cheap media…

Don’t even try to burn that DL at 8x again! TRY AT 4x![/quote]

You are right. I didn’t mean RW…just R. and I only bought it [I]because[/I] it was cheap. Most of what i download is just avi files and i burn them as data since i have a divx capable dvd player, so i’m not that concerned with quality. But i was trying to make a few DVDs for my girlfriend. I guess I can always just convert them to avi. The only reason I’m so ticked is that they have worked before. Thanks for your time. Everyone here kicks ass.


#10

I would just use single layer DVD discs to burn .avi’s. I have a Divx compatible player also :cool: No need to have coasters using DL’s. No need to change format either :smiley:

They should play even if you burn them (.avi’s) to a CD-R.


#11

yeah, I burn throwaway stuff to CDs to watch while I’m doing dishes and then actually throw them away. The DL was just for some actual DVDs I was trying to burn. My burner doesn’t care what single layer I use. My book of TV shows is filled with whatever brand DVDs were on sale any given week.


#12

hello to all!

sorry for bumping old topic but i have about the same problem as apop32. could anyone help? :slight_smile:

my burner is asus drw-1608p3s
trying to burn on traxdata dvd+r dl

here is my nero log:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM 

NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
 (Nero Express)
Recorder:             <ASUS DRW-1608P3S>        Version: 1.19 - HA 1 TA 0 - 7.0.1.2
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2000kB
 Bus Type      :      via Inquiry data (1) -> ATAPI, detected: ?
 Connected to MMC as unknown drive with class-nr : 1
 Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM:               <XR2704D  MLQ990U         >Version: 2.0B - HA 1 TA 3 - 7.0.1.2
 Adapter driver:      <SCSI>                    HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : WDC WD800BB-55JKC0               atapi Port 0 ID 0  DMA: On 
DiskPeripheral       : WDC WD1600AAJS-00PSA0            atapi Port 1 ID 0  DMA: On 
CdRomPeripheral      : ASUS DRW-1608P3S                 atapi Port 3 ID 0  DMA: On 
CdRomPeripheral      : NERO    IMAGEDRIVE2     2.26  imagedrv Port 4 ID 0  DMA: Off
CdRomPeripheral      : NERO    IMAGEDRIVE2     2.26  imagedrv Port 4 ID 1  DMA: Off
CdRomPeripheral      : XR2704D MLQ990U         2.0B   vaxscsi Port 5 ID 0  DMA: Off

=== CDRom-Device-Map ===
ASUS DRW-1608P3S           F:   CDRom0
NERO IMAGEDRIVE2           H:   CDRom1
NERO IMAGEDRIVE2           I:   CDRom2
XR2704D MLQ990U            J:   CDRom3
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 1023MB (1047792kB)
Free physical memory: 457MB (468176kB)
Memory in use       : 55 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

17.9.2008
UDF compilation
3:22:38 PM	#1 Text 0 File Isodoc.cpp, Line 6411
	UDF document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	UDF Mode                : pure
	UDF Revision            : 1.02
	UDF Partition Type      : physical
	
3:22:38 PM	#2 Text 0 File ThreadedTransfer.cpp, Line 525
	ReadBuffer-Pipe got 81920KB of Memory
	
3:22:38 PM	#3 Text 0 File Reader.cpp, Line 124
	Reader running
	
3:22:38 PM	#4 Text 0 File Burncd.cpp, Line 3302
	Turn on Disc-At-Once, using DVD media
	
3:22:38 PM	#5 Text 0 File DlgWaitCD.cpp, Line 279
	Last possible write address on media:  4173823 (927:30.73, 8151MB)
	Last address to be written:            2843167 (631:48.67, 5553MB)
	
3:22:38 PM	#6 Text 0 File DlgWaitCD.cpp, Line 291
	Write in overburning mode: NO (enabled: CD)
	
3:22:38 PM	#7 Text 0 File DlgWaitCD.cpp, Line 2578
	Recorder: ASUS DRW-1608P3S, Media type: DVD+R9 Double Layer
	 Disc Manufacturer ID: RITEK, Media Type ID: S04, Product revision number: 1
	 Disc Application Code: 0, Extended Information Indicators: 3
	
3:22:38 PM	#8 Text 0 File DlgWaitCD.cpp, Line 458
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
3:22:38 PM	#9 Text 0 File ThreadedTransferInterface.cpp, Line 847
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 2843168 (2843168) = #2843168/631:48.68
	    relocatable, disc pos for caching/writing not required/ required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2843168 blocks [F: ASUS DRW-1608P3S]
	--------------------------------------------------------------
	
3:22:38 PM	#10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
	Prepare recorder [F: ASUS DRW-1608P3S] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    5822808064, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	       0 |  lead-in |   0 |    0x41 | 0x00
	       0 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	 2843168 | lead-out |   1 |    0x41 | 0x00
	
3:22:38 PM	#11 Text 0 File SCSIPassThrough.cpp, Line 36
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
3:22:38 PM	#12 Phase 24 File dlgbrnst.cpp, Line 1725
	Caching of files started
	
3:22:38 PM	#13 Text 0 File Burncd.cpp, Line 4132
	Cache writing successful.
	
3:22:38 PM	#14 Phase 25 File dlgbrnst.cpp, Line 1725
	Caching of files completed
	
3:22:38 PM	#15 Phase 36 File dlgbrnst.cpp, Line 1725
	Burn process started at 2.4x (3,324 KB/s)
	
3:22:39 PM	#16 Text 0 File ThreadedTransferInterface.cpp, Line 2685
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
3:22:39 PM	#17 Text 0 File DVDPlusDualLayer.cpp, Line 463
	Disc finalized, LBA total Image size: 2843168 (5553MB), Last LBA L0: 1421599 (2776MB)
	
3:22:42 PM	#18 SPTI -1106 File SCSIPassThrough.cpp, Line 323
	F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x73
	Sense Qual: 0x03
	CDB Data:   0xBF 00 00 00 00 00 00 20 00 0C 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 73 03 
	Buffer x03f3a200: Len xc
	0x00 0A 00 00 00 00 00 00 00 15 B1 20 
	
3:22:42 PM	#19 Text 0 File DVDPlusDualLayer.cpp, Line 639
	L0 Data Zone Capacity not set.
	Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB)
	
3:22:42 PM	#20 CDR -1106 File ThreadedTransferInterface.cpp, Line 1799
	Power calibration error
	F: ASUS DRW-1608P3S
	
3:22:42 PM	#21 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
	Could not perform start of Disc-at-once
	
3:22:42 PM	#22 Phase 38 File dlgbrnst.cpp, Line 1725
	Burn process failed at 2.4x (3,324 KB/s)
	

Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 11:16:24 PM 
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 3/8/2007 1:51:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.5512 (xpsp.080413-2108), size=96384 bytes, created 4/14/2008 12:10:32 AM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

#13

Welcome to the forum tomo :slight_smile:

Your burner doesn’t appear to like that particular media (RITEK S04). Everything else checks out - DMA, burn size etc.

For DL burning, Verbatim is the only safe bet.


#14

hello arachne!

i know that [I]verbatim[/I] media are very reliable, but i haven’t had any problems with [I]traxdata[/I] so far, single-layer though…

thanks for the advice, i hope it’s just the media. i’ll let you know :wink:


#15

Yeah, single layer Traxdata can be OK, I have some here, both - and +R :iagree:

But Ritek/Traxdata DL…quality aside, they’re made in a different way to Verbatim ones (“inverted stack” method - read more here), and not all burners can get on with that (as they’re optimised for the way Verbatim DLs are manufactured).

So yep, I’d say it’s just the media…or rather the way it’s made :wink: