Nero 7.10.1.2 burning Rom error burning Ridata Double Layer S04

Is there a known problem with burning Ridata Double Layer S04 DVD+R media with Nero 7 and Lite On SHM-165H6S DL burner?

Error message “Burn Process Failed at 8X”
I have tried 1X, 2X, 4X same results.
Nero CD-DVD test says “No Additional Sense information”

Log (#23) says illegal Disc?

Home Theater
home
1C82-0000-19E5-MAAX-4005-1123-****

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.10.1.2
Internal Version: 7, 10, 1, 2

Recorder: <LITE-ON DVDRW SHM-165H6S>Version: HS0E - HA 1 TA 1 - 7.10.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <XK5050P VOS901D >Version: 1.0 - HA 1 TA 2 - 7.10.1.2
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVDRW SHM-165H6S atapi Port 0 ID 1 DMA: On
DiskPeripheral : Maxtor 6Y200M0 atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST3500630AS atapi Port 2 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SHM-165H6S atapi Port 3 ID 0 DMA: On
CdRomPeripheral : XK5050P VOS901D 1.0 a1vb52up Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
XK5050P VOS901D E: CdRom2
LITE-ON DVDRW SHM-165H6S F: CdRom1
LITE-ON DVDRW SHM-165H6S G: CdRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 453MB (464780kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

2.1.2008
Burn DVD Image
9:33:19 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

9:33:20 PM #2 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media

9:33:20 PM #3 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3229427 (717:39.02, 6307MB)

9:33:20 PM #4 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD DVD)

9:33:20 PM #5 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: LITE-ON DVDRW SHM-165H6S, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: RITEK, Media Type ID: S04, Product revision number: 66
Disc Application Code: 0, Extended Information Indicators: 3

9:33:20 PM #6 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:33:20 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 3229428 (3229428) = #3229428/717:39.3
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3229428 blocks [F: LITE-ON DVDRW SHM-165H6S]
--------------------------------------------------------------

9:33:20 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [F: LITE-ON DVDRW SHM-165H6S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 6613868544, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 3229428 | 3229428 | 0x00
3229428 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

9:33:20 PM #9 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

9:33:20 PM #10 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-No, small files-No (<64KB)

9:33:20 PM #11 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 8x (11,080 KB/s)

9:33:20 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

9:33:20 PM #13 Text 0 File DVDPlusDualLayer.cpp, Line 507
L0 Data Zone Capacity already set to 2086912 (1FD800h, 4076MB), requested last LBA L0 0 (0h, 0MB) ignored

9:33:20 PM #14 Text 0 File DVDPlusDualLayer.cpp, Line 670
L0 Data Zone Capacity not set.
Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB)

9:33:20 PM #15 CDR -1205 File DVDPlusDualLayer.cpp, Line 686
Burning Layer 1

9:33:20 PM #16 Text 0 File DVDPlusDualLayer.cpp, Line 696
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode

9:33:20 PM #17 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: RITEK…
Media type ID: S04
Product revision number: 66
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16…63]:
00 00 03 52 49 54 45 4B - 00 00 00 53 30 34 42 40 …RITEK…S04B@
25 25 37 10 00 2C 6C 00 - 2C 6C 20 1F 0C 0C 14 14 %%7…,l.,l…
02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 …

9:33:20 PM #18 Text 0 File DVDR.cpp, Line 7102
Drive: LITE-ON DVDRW SHM-165H6S
Book Type request [LO], rev 3: DVD-ROM
Changing the Book Type was finished successfully, return code 0

9:33:20 PM #19 CDR -1207 File DVDR.cpp, Line 6481
Book Type automatically set to: DVD-ROM

9:33:20 PM #20 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes

9:33:20 PM #21 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

9:33:21 PM #22 SPTI -1046 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x06
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 06
Buffer x07d30040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

9:33:21 PM #23 CDR -1046 File Writer.cpp, Line 303
Illegal disc
F: LITE-ON DVDRW SHM-165H6S

9:33:22 PM #24 Phase 127 File dlgbrnst.cpp, Line 1762
Generating DVD high compatibility borders

9:33:22 PM #25 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 0

9:33:22 PM #26 Phase 129 File dlgbrnst.cpp, Line 1762
Generating DVD borders completed successfully

9:33:22 PM #27 Text 0 File DVDR.cpp, Line 7102
Drive: LITE-ON DVDRW SHM-165H6S
Book Type request [LO], rev 3: DVD+R DL
Changing the Book Type was finished successfully, return code 0

9:33:22 PM #28 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 8x (11,080 KB/s)

9:33:23 PM #29 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

9:33:25 PM #30 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

9:33:25 PM #31 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

I wouldnt use them, especially not at 8x!!

How exactly is the burner connected/set up?

CdRomPeripheral : LITE-ON DVDRW SHM-165H6S atapi Port 3 ID 0 DMA: On

Thanks for help. The Liteon is connected via 80 pin IDE cable directly to the IDE connector on the Aopen AX4S GN Motherboard. I have had great success using DVDFab Platinum 4 with DVD Region Free then using Nero 7 to make 4.7GB DVDs from ISOs. This is the first time I tried using a non compressed movie to DL from an ISO. I have tried to burn files to the RiData DL disc and get the same results “Burn process failed” error. Got me?

Jerry i have the “same” issue .Exactly the same problem only on DL i have read many forums post and there are some comments saying Nero does not burn DL so good as it was supposed to.

I have been trying to figure out whats the problem for some time, and have already started testing other software.

already had a failure with alchool to.

:a:a:a:a

The solution was purchasing Verbatim DVD+R DL from Newegg. They work great with Nero 7 and 8 and the Lite On SHM-165H6S DVD DL Bruners. I’m now using Nero 8. I have even burned two DVD DLs at a time at 4X just fine.

Ridata Double Layer S04 DVD+R media with Nero 7 AND WITH NERO 8 and Lite On SHM-165H6S DL burner does not work. Nero and the Lite On SHM-165H6S does NOT recognize the Ridata S04s. I have asked Newegg for a RMA to return the Ridata.

[QUOTE=jerryw;1974658]The solution was purchasing Verbatim DVD+R DL from Newegg. They work great with Nero 7 and 8 and the Lite On SHM-165H6S DVD DL Bruners. I’m now using Nero 8. I have even burned two DVD DLs at a time at 4X just fine.

Ridata Double Layer S04 DVD+R media with Nero 7 AND WITH NERO 8 and Lite On SHM-165H6S DL burner does not work. Nero and the Lite On SHM-165H6S does NOT recognize the Ridata S04s. I have asked Newegg for a RMA to return the Ridata.[/QUOTE]

And the real answer is provided by Ridata in the URL below. Notice the column Ritek S04 media, the SHM-165H6 is NOT supported!!!
http://ritekusa.com/downloads/compatiblity/DVD+RDL/DVD+R_DL_Compatibility_at_DVD_Burner_Dec_05_2007_1.pdf