Nero 6.6.0.3 errors

vbimport

#1

well, I upgraded to appease SP2 and am still having problems. I have been trying to write an ISO and have tried both DAO and TAO to no avail. The error I usually get is “could not perform end track”. Here is a DAO log

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 6:01:02 PM
ahead WinASPI: File ‘C:\Nero Rom\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero version: 6.6.0.3
Recorder: <HL-DT-ST RW/DVD GCC-4240N>Version: E112 - HA 0 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST RW/DVD GCC-4240N>Version: E112 - HA 0 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4240N atapi Port 0 ID 0 DMA: On
DiskPeripheral : HITACHI_DK23EA-60 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST RW/DVD GCC-4240 D: CDRom0

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523248kB)
Free physical memory: 205MB (210292kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

4.1.2005
CD-ROM (ISO)
4:19:29 PM #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

4:19:29 PM #2 Text 0 File Burncd.cpp, Line 2866
HL-DT-ST RW/DVD GCC-4240N
Buffer underrun protection activated

4:19:29 PM #3 Text 0 File Reader.cpp, Line 127
Reader running

4:19:29 PM #4 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST RW/DVD GCC-4240N running

4:19:29 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

4:19:30 PM #6 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-at-once, using CD-R/RW media

4:19:30 PM #7 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 12004 ( 2:42.04)

4:19:30 PM #8 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

4:19:30 PM #9 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: HL-DT-ST RW/DVD GCC-4240N;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

4:19:30 PM #10 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:19:30 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 12005 (12005) = #12005/2:40.5
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 12005 blocks [HL-DT-ST RW/DVD GCC-4240N]
--------------------------------------------------------------

4:19:30 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [HL-DT-ST RW/DVD GCC-4240N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 24893440, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
12005 | lead-out | 1 | 0x41 | 0x00

4:19:30 PM #13 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

4:19:30 PM #14 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.

4:19:30 PM #15 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

4:19:30 PM #16 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (600 KB/s)

4:19:30 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:19:30 PM #18 Text 0 File Mmc.cpp, Line 16285
StartDAO : CD-Text - Off

4:19:30 PM #19 Text 0 File Mmc.cpp, Line 21025
Set BUFE: Buffer underrun protection -> ON

4:19:30 PM #20 Text 0 File Mmc.cpp, Line 16572
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 02 2a 05

4:19:31 PM #21 Text 0 File Cdrdrv.cpp, Line 1282
16:19:31.757 - HL-DT-ST RW/DVD GCC-4240N\H0 T0 : Queue again later

4:19:40 PM #22 SCSI -1135 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03EE0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

4:19:40 PM #23 CDR -1135 File Writer.cpp, Line 311
Write error

4:19:40 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:19:41 PM #25 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (600 KB/s)

Existing drivers:
File ‘Drivers\NeroCD2k.sys’: Ver=1.0.0.9, size=44227 bytes, created 9/2/2003 5:41:51 PM
File ‘Drivers\ADPU160M.SYS’: Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 AM
File ‘Drivers\CDRALW2K.SYS’: Ver=5.3.4.21, size=23436 bytes, created 12/17/2002 9:32:46 AM
File ‘Drivers\InCDfs.SYS’: Ver=4, 3, 0, 5, size=93440 bytes, created 9/13/2004 11:54:06 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=4, 3, 0, 5, size=28672 bytes, created 9/13/2004 11:54:46 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=4, 3, 0, 5, size=7680 bytes, created 9/13/2004 11:58:10 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:42 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#2

Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Try a different brand/MID media. CMC MAG are unreliable and inconsistent at the best of times.

Sense Code: 0x0C
Sense Qual: 0x00
This gives us nothing to go on, could you post a TAO log?


#3

Hi and be welcome to our forums!

Does this problem occur on just one type of media or on all media? This is quite a common media error that mainly occurs when a writer can’t really handle the media well (or when the media quality is low).

If it happens to just one kind of media, you might try to update your writer’s firmware to see what happens. If it’s a general writing problem, we have to dig further.


#4

It occurs with all types of media here is a TAO log

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 6:01:02 PM
ahead WinASPI: File ‘C:\Nero Rom\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero version: 6.6.0.3
Recorder: <HL-DT-ST RW/DVD GCC-4240N>Version: E112 - HA 0 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST RW/DVD GCC-4240N>Version: E112 - HA 0 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4240N atapi Port 0 ID 0 DMA: On
DiskPeripheral : HITACHI_DK23EA-60 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST RW/DVD GCC-4240 D: CDRom0

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523248kB)
Free physical memory: 200MB (204860kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

4.1.2005
CD-ROM (ISO)
11:31:40 PM #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:31:40 PM #2 Text 0 File Burncd.cpp, Line 2866
HL-DT-ST RW/DVD GCC-4240N
Buffer underrun protection activated

11:31:40 PM #3 Text 0 File Reader.cpp, Line 127
Reader running

11:31:40 PM #4 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST RW/DVD GCC-4240N running

11:31:40 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

11:31:41 PM #6 Text 0 File Burncd.cpp, Line 3151
Turn on Track-at-once, using CD-R/RW media

11:31:41 PM #7 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 12004 ( 2:42.04)

11:31:41 PM #8 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

11:31:41 PM #9 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: HL-DT-ST RW/DVD GCC-4240N;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

11:31:41 PM #10 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:31:41 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 12005 (12005) = #12005/2:40.5
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 12003 blocks [HL-DT-ST RW/DVD GCC-4240N]
--------------------------------------------------------------

11:31:41 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [HL-DT-ST RW/DVD GCC-4240N] for write in TAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 24893440, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
12005 | lead-out | 1 | 0x41 | 0x00

11:31:41 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1105
Removed 2 run-out blocks from end of track 1. Length: 12005 -> 12003.

11:31:41 PM #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

11:31:41 PM #15 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.

11:31:41 PM #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

11:31:41 PM #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (600 KB/s)

11:31:41 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:31:41 PM #19 Text 0 File Mmc.cpp, Line 21025
Set BUFE: Buffer underrun protection -> ON

11:31:55 PM #20 SCSI -1135 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03E20000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

11:31:55 PM #21 CDR -1135 File Writer.cpp, Line 311
Write error

11:31:55 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:31:56 PM #23 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
HL-DT-ST RW/DVD GCC-4240N\H0 T0

11:31:56 PM #24 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack

11:31:56 PM #25 Text 0 File Mmc.cpp, Line 15737
<HL-DT-STRW/DVD GCC-4240N> start Close Session

11:31:56 PM #26 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (600 KB/s)

Existing drivers:
File ‘Drivers\NeroCD2k.sys’: Ver=1.0.0.9, size=44227 bytes, created 9/2/2003 5:41:51 PM
File ‘Drivers\ADPU160M.SYS’: Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 AM
File ‘Drivers\CDRALW2K.SYS’: Ver=5.3.4.21, size=23436 bytes, created 12/17/2002 9:32:46 AM
File ‘Drivers\InCDfs.SYS’: Ver=4, 3, 0, 5, size=93440 bytes, created 9/13/2004 11:54:06 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=4, 3, 0, 5, size=28672 bytes, created 9/13/2004 11:54:46 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=4, 3, 0, 5, size=7680 bytes, created 9/13/2004 11:58:10 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:42 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)