Nero 6.0.0.15/5.5.10.50 and Plextor 708A problems

I have tried to burn 2 different data DVDs with the newest version of Nero 6 on my Plextor 708A. I have tried speeds from 2.4x to 8x, with varying amounts of data in the burn. All burns have gone right to the end, then failed with this message:
Invalid Field Parameter
Could not perform end of Disk-at-once
Burn process failed

Any suggestions? Is this a known problem?
TIA

I had the same problem…went back to Nero 5.5.10.42 and it works like a champ! Burned two data DVD’s and at least Three Movies…all in under 7:40 for the full disk burns…

Bob

Nero 6 is way too buggy…too many problems…check the forums at www.cdrlabs.com and you’ll see a lot of issues with Nero 6

Nero 6.0.0.11 works fine as well.

are I have the same problem, which the medias?

I can not burn DVR+R with Nero 5.5 and Nero 6.0. DVR-R, DVR-RW, DVR+RW work fine.

With EasyCD (5.5. and 6) I can burn DVD+R.

No idea what the problem can be. The burning fails at closing the disc. I used Ricoh and some other media. Alle the same problem.

Originally posted by grifis
[B]I can not burn DVR+R with Nero 5.5 and Nero 6.0. DVR-R, DVR-RW, DVR+RW work fine.

With EasyCD (5.5. and 6) I can burn DVD+R.

No idea what the problem can be. The burning fails at closing the disc. I used Ricoh and some other media. Alle the same problem. [/B]

CDRLabs has a bunch more info about this subject:
http://www.cdrlabs.com/phpBB/viewtopic.php?t=12523

Use Nero 5.5.10.42 or Nero 6.0.0.11

http://www.dvdcreation.net/forum/index.php?act=ST&f=9&t=8294&

thank you

Problem is, where do i get the upgrade or downgrade to 6.0.0.11.

My CD contains version 6.0.0.6.

On the Nero websit I can only download 6.0.0.15.

Has anybody the 6.0.0.11 update for me.

I have the same thing with any version of nero

Originally posted by aviationwiz
[B]CDRLabs has a bunch more info about this subject:
http://www.cdrlabs.com/phpBB/viewtopic.php?t=12523

Use Nero 5.5.10.42 or Nero 6.0.0.11 [/B]

Thank for you advise, it now works. :smiley:

I deinstalled Nero 6.0.0.15. I used the cleaning tools (you find them at their German Nero site http://www.nero.com/de/631938347293151.html), to be sure everything was deinstalled amd removed from the system.

After that, I reinstalled my Nero 6 (version 6.0.0.6 pn the CD). I had to look around to find version 6.0.0.11. I could download it from ftp.nero.com.

Now I could succefully burn a Platinum DVD+R (single or 2.4 speed version, I do not know) at around 2.7.

I hoop that Nero brings out an update on 6.0.0.15 soon. In general: performance etc. looks better. Pitty that they introduced a fault on DVD+R). The rest works ok. :slight_smile:

I also have a problem like that

When I burn MMore 2x DVD-R it says
Invalid Field Parameter
Could not perform start of Disk-at-once
Burn process failed

Made this thread sticky. I myself have also gone back to Nero 6.0.0.11.
I’ve edited the thread title so that it’s a bit more informative.

If anyone is looking for the 6.0.0.11 update, look no further:
http://tasman.lrehosting.com/Nero60011.exe

Thanks for the Info! Burned 2 coasters before I started looking around for an answer. Thanks for the 6.0.0.11 Link. I also found that the 4X TDK’s they sell at Best Buy write at 8X.

There is a patch available for Nero 60015 its 3.15 MB

Originally posted by catch22
There is a patch available for Nero 60015 its 3.15 MB
Where is it then? Please share! :slight_smile:

The patch is here

http://download.wonderboard.de/Nero-6-Update.exe

Finally found the patch using googles translation tool and the link above. It does not work. I made another coaster. You still get the ,“connot complete end of disk at once.”

The link above work but you must use mouse rigth click and “save as”

I had no problem getting the file to work, I downloaded it and ran it but It did not fix the problem. Even with 6.0.0.15 and the 3.16 MB patch Applied you still run into the same poblems with DVD+R media.