Nero 5.5.10.56 Burning Errors, Please Help

vbimport

#1

Ok, I’ve got a brand new drive, which worked fine for a while, but now fails every burn. I’ve used every cleaner patch at Nero’s webpage to pull it all off, reinstalled Nero 5.0.3.8 and patched up to 5.5.10.56, but it still fails to burn. The most common error is this first log, but occasionally I get an error of the second log type. Any advice you can give would be appreciated.

Windows 98 4.90 (ME)
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=1, 0, 0, 0, size=36864 bytes, created 08/06/2000 17:00:00
Nero Version: 5.5.10.56 (Nero Express)
Recorder: <LITE-ON LTR-52327S> Version: QS03 - HA 0 TA 1 - 5.5.10.56
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LG DVD-ROM DRD8120B>Version: 1.04 - HA 0 TA 0 - 5.5.10.56
Adapter driver: <ESDI_506> HA 0
Bus Type : default (0) -> ATAPI, detected: ATAPI
LG DVD-ROM DRD8120B (Target 0, D:): Autoinsert Off, DMA On, Disconnect On, SyncDataXfer Off
LITE-ON LTR-52327S (Target 1, E:): Autoinsert Off, DMA On, Disconnect On, SyncDataXfer Off
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523704kB)
Free physical memory: 4MB (4780kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On

28.9.2004
CD-ROM (ISO)
12:51:03 #1 Text 0 File Isodoc.cpp, Line 7604
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

12:51:03 #2 Phase 90 File dlgbrnst.cpp, Line 1655
Buffer Underrun Protection activated

12:51:03 #3 Text 0 File Reader.cpp, Line 115
Reader running

12:51:03 #4 Text 0 File Writer.cpp, Line 125
Writer LITE-ON LTR-52327S running

12:51:03 #5 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)

12:51:03 #6 Text 0 File Burncd.cpp, Line 3773
Turn on Track-At-Once, using CD-R/RW media

12:51:03 #7 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 150660 (150660) = #150660/33:28.60
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

12:51:04 #8 Text 0 File DlgWaitCD.cpp, Line 229
Last possible write address on media: 359844 (79:59.69)
Last address to be written: 150659 (33:30.59)

12:51:04 #9 Text 0 File DlgWaitCD.cpp, Line 234
Write in overburning mode: FALSE

12:51:04 #10 Text 0 File DlgWaitCD.cpp, Line 1703
Recorder: LITE-ON LTR-52327S;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

12:51:05 #11 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder LITE-ON LTR-52327S for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC “”, FilePos 0 307200 308858880

12:51:05 #12 Text 0 File ThreadedTransferInterface.cpp, Line 852
Removed 2 run-out blocks from end of track 1.

12:51:05 #13 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 150660 (150660) = #150660/33:28.60
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 150658 blocks [LITE-ON LTR-52327S ]
--------------------------------------------------------------

12:51:05 #14 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started

12:51:05 #15 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed

12:51:05 #16 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 24x (3,600 KB/s)

12:51:06 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

12:51:06 #18 Text 0 File Mmc.cpp, Line 19546
Set BUFE: supported -> ON , SMART-BURN : ON

12:51:24 #19 SCSI -1135 File Cdrdrv.cpp, Line 1447
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x02780000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x09 0x15 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

12:51:24 #20 MMC -1135 File Writer.cpp, Line 333
Write error

12:51:24 #21 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

12:51:25 #22 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader

12:51:25 #23 CDR -201 File WriterStatus.cpp, Line 194
Invalid write state

12:51:25 #24 TRANSFER -18 File WriterStatus.cpp, Line 194
Could not perform EndTrack

12:51:25 #25 Text 0 File Mmc.cpp, Line 14537
<LITE-ON LTR-52327S > start Close Session

12:51:27 #26 SCSI -1176 File Cdrdrv.cpp, Line 1243
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x00

12:51:27 #27 MMC -1176 File WriterStatus.cpp, Line 233
Session fixation error

12:51:27 #28 TRANSFER -19 File WriterStatus.cpp, Line 233
Could not perform Fixation

12:51:27 #29 Text 0 File WriterStatus.cpp, Line 242
falling back to disc fixation

12:51:27 #30 Text 0 File Mmc.cpp, Line 14537
<LITE-ON LTR-52327S > start Close Session

12:51:27 #31 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 24x (3,600 KB/s)

12:51:27 #32 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated

Existing drivers:
File ‘IoSubSys\SCSI1HLP.VXD’: Ver=4.90.3000, size=19278 bytes, created 08/06/2000 17:00:00
File ‘IoSubsys\NEROCD95.VXD’: Ver=4.5.0.14, size=39882 bytes, created 11/03/2002 12:55:38
File ‘IoSubsys\CDR4VSD.VXD’: Ver=5.3.2.31, size=101616 bytes, created 24/01/2003 23:28:52
File ‘IoSubsys\CDRALVSD.VXD’: Ver=5.3.2.31, size=20043 bytes, created 24/01/2003 23:28:52
File ‘IoSubsys\ACBHLPR.VXD’: Ver=1.01, size=40508 bytes, created 02/03/2001 20:55:54
File ‘IoSubsys\CDFS.VXD’: Ver=4.90.3000, size=59141 bytes, created 08/06/2000 17:00:00
File ‘IoSubsys\ESDI_506.PDR’: Ver=4.90.3000, size=25365 bytes, created 08/06/2000 17:00:00
File ‘…\System32\Drivers\1394bus.sys’: Ver=4.90.3000.1, size=44240 bytes, created 08/06/2000 17:00:00
File ‘…\System32\Drivers\Ohci1394.sys’: Ver=4.90.3000.1, size=49488 bytes, created 08/06/2000 17:00:00
File ‘…\System32\Drivers\Sbp2port.sys’: Ver=4.90.3000.1, size=36336 bytes, created 08/06/2000 17:00:00
File ‘IoSubsys\Disktsd.vxd’: Ver=4.90.3000, size=18663 bytes, created 08/06/2000 17:00:00

Registry Keys:


Windows 98 4.90 (ME)
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=1, 0, 0, 0, size=36864 bytes, created 08/06/2000 17:00:00
Nero Version: 5.5.10.56
Recorder: <LITE-ON LTR-52327S> Version: QS03 - HA 0 TA 1 - 5.5.10.56
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LG DVD-ROM DRD8120B>Version: 1.04 - HA 0 TA 0 - 5.5.10.56
Adapter driver: <ESDI_506> HA 0
Bus Type : default (0) -> ATAPI, detected: ATAPI
LG DVD-ROM DRD8120B (Target 0, D:): Autoinsert Off, DMA On, Disconnect On, SyncDataXfer Off
LITE-ON LTR-52327S (Target 1, E:): Autoinsert Off, DMA On, Disconnect On, SyncDataXfer Off
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523704kB)
Free physical memory: 9MB (9708kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On

28.9.2004
CD-ROM (ISO)
13:24:08 #1 Text 0 File Isodoc.cpp, Line 7604
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

13:24:08 #2 Phase 90 File dlgbrnst.cpp, Line 1655
Buffer Underrun Protection activated

13:24:09 #3 Text 0 File Reader.cpp, Line 115
Reader running

13:24:09 #4 Text 0 File Writer.cpp, Line 125
Writer LITE-ON LTR-52327S running

13:24:09 #5 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)

13:24:09 #6 Text 0 File Burncd.cpp, Line 3773
Turn on Track-At-Once, using CD-R/RW media

13:24:09 #7 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 150673 (150673) = #150673/33:28.73
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

13:24:11 #8 Text 0 File DlgWaitCD.cpp, Line 229
Last possible write address on media: 359844 (79:59.69)
Last address to be written: 152622 (33:56.72)

13:24:11 #9 Text 0 File DlgWaitCD.cpp, Line 234
Write in overburning mode: FALSE

13:24:11 #10 Text 0 File DlgWaitCD.cpp, Line 1703
Recorder: LITE-ON LTR-52327S;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

13:24:14 #11 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder LITE-ON LTR-52327S for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD not fixated
Tracks 2 to 2:
TRM_DATA_MODE1, 2048/0x0, ISRC “”, FilePos 0 307200 308885504

13:24:14 #12 Text 0 File ThreadedTransferInterface.cpp, Line 852
Removed 2 run-out blocks from end of track 2.

13:24:14 #13 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 150673 (150673) = #150673/33:28.73
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 150671 blocks [LITE-ON LTR-52327S ]
--------------------------------------------------------------

13:24:14 #14 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started

13:24:15 #15 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed

13:24:15 #16 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 52x (7,800 KB/s)

13:24:16 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #1950

13:24:16 #18 Text 0 File Mmc.cpp, Line 19546
Set BUFE: supported -> ON , SMART-BURN : ON

13:25:37 #19 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

13:26:48 #20 Text 0 File Mmc.cpp, Line 14537
<LITE-ON LTR-52327S > start Close Session

13:26:50 #21 SCSI -1176 File Cdrdrv.cpp, Line 1243
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x00

13:26:50 #22 MMC -1176 File ThreadedTransferInterface.cpp, Line 994
Session fixation error

13:26:50 #23 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 994
Could not perform Fixation

13:26:50 #24 Text 0 File Mmc.cpp, Line 14537
<LITE-ON LTR-52327S > start Close Session

13:26:50 #25 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 52x (7,800 KB/s)

13:26:50 #26 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated

Existing drivers:
File ‘IoSubSys\SCSI1HLP.VXD’: Ver=4.90.3000, size=19278 bytes, created 08/06/2000 17:00:00
File ‘IoSubsys\NEROCD95.VXD’: Ver=4.5.0.14, size=39882 bytes, created 11/03/2002 11:55:38
File ‘IoSubsys\CDFS.VXD’: Ver=4.90.3000, size=59141 bytes, created 08/06/2000 17:00:00
File ‘IoSubsys\ESDI_506.PDR’: Ver=4.90.3000, size=25365 bytes, created 08/06/2000 17:00:00
File ‘…\System32\Drivers\1394bus.sys’: Ver=4.90.3000.1, size=44240 bytes, created 08/06/2000 17:00:00
File ‘…\System32\Drivers\Ohci1394.sys’: Ver=4.90.3000.1, size=49488 bytes, created 08/06/2000 17:00:00
File ‘…\System32\Drivers\Sbp2port.sys’: Ver=4.90.3000.1, size=36336 bytes, created 08/06/2000 17:00:00
File ‘IoSubsys\Disktsd.vxd’: Ver=4.90.3000, size=18663 bytes, created 08/06/2000 17:00:00

Registry Keys:


#2

Try doing a disk defrag. It worked for me


#3

i am trying to use nero to burn dvds without copy protection but everytime i try it comes up with a message that says burn error. this is what it says.

1A23-0009-6030-2341-0874-4247

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero API version: 6.3.1.15
Using interface version: 6.0.0.0
Installed in: C:\Program Files\Ahead\Nero
Application: ahead\Nero - Burning Rom
Recorder: <PIONEER DVD-RW DVR-104> Version: 4.10 - HA 1 TA 0 - 6.3.1.15
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SV0813H atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-104 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-140C atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-104 E: CDRom0
SAMSUNG CD-ROM SC-140C F: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 39845888 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 247MB (253460kB)
Free physical memory: 119MB (122060kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.12.2004
NeroAPI
3:15:30 PM #1 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted

3:15:31 PM #2 Text 0 File Reader.cpp, Line 118
Reader running

3:15:31 PM #3 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

3:15:31 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

3:15:31 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

3:15:31 PM #6 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media

3:15:31 PM #7 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286127 (508:01.52, 4465MB)

3:15:31 PM #8 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO

3:15:31 PM #9 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: PIONEER DVD-RW DVR-104, Media type: DVD-R
Disc Manufacturer: TYG01 -
Disc Application Code: 64, Disc Physical Code: 193

3:15:31 PM #10 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================

3:15:31 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [PIONEER DVD-RW DVR-104 ]
--------------------------------------------------------------

3:15:35 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 983
Prepare recorder [PIONEER DVD-RW DVR-104 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286128 | lead-out | 1 | 0x00 | 0x41

3:15:36 PM #13 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

3:15:36 PM #14 Text 0 File Burncd.cpp, Line 4177
Cache writing successful.

3:15:36 PM #15 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

3:15:36 PM #16 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 1x (1,385 KB/s)

3:15:39 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2343
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

3:15:39 PM #18 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0012B7B8
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x52 0x01 0x00 0x00 0x00 0x05 0x00 0x00 0x24 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x24 0x00

3:15:39 PM #19 CDR -1066 File ThreadedTransferInterface.cpp, Line 1585
Invalid field in command

3:15:39 PM #20 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1585
Invalid track info

3:15:39 PM #21 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 1x (1,385 KB/s)

3:15:39 PM #22 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

3:15:39 PM #23 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.02.50a, size=17136 bytes, created 1/16/2003 4:02:00 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

I dont know a whole lot about computers so bare with me and and help with be greatly appreciated…thanks


#4

@ ivehaditwithnero
Make sure you have the latest firmware for your drive. Also, post a nero infotool system scan. Save as a .txt file and post using the ‘manage attachments’ button in the ‘go advanced’ reply window


#5

i ran the infotool system scan but it wouldnt let me save as a txt file. what is firmware?


#6

#7

@ ivehaditwithnero
To save an infotool scan(not the error log), click the diskette icon in the toolbar and save as a .txt file. Make sure all 8 boxes are checked. thanx