Need help with NEROlinux and Xandros automount

vbimport

#1

Hello, This is my first time on this forum, and I am looking for some help. I an running Xandros 3.0 Linux Business Edition and cannot find software to burn CD/DVD. Xandros has a built in DVD burner. (that does not work)
I have a registered copy of NEROLinux and am trying to get it to recognize my drive. It says upon startup of NeroLinux

NeroLINUX has detected some running programs that interfere with disk drives. yada yada yada Please make sure no other programs are accessing your disk drives when starting this program. yada yada yada The following programs have been detected to be running on your system.

-autorun (KDE CD/DVD automount daemon)

How do I disable this feature in KDE so that Nero can see my disk and use it to burn?
Yes… I know this is probably a n00b question.

Thanks!
cyb3rlinux


#2

The time it took you to write this message was probably more than if you had just opened the manual (which is installed with nerolinux) and searched for “kde”. Try it … /usr/share/nero/docs/Manual.pdf page 15 :wink:


#3

Yep. Read the manual, shut down the automount and the error does not pop up now on load.
Now I have another problem, my drive is not recognized as a writer. I can read files from it when a CD is inserted, the OS recognizes the CD as a drive, but there is no writer support in the DVD Writer software that comes with Xandros or in Nero. Any help is appreciated, I would really like to burn in Xandros.


#4

For the hardware experts here to even start to help you, you are going to have to give a lot more info than that ~ Drive make / model, connection mode (ide / scsi), are you using ide-scsi or just ide, kernel version too might help.


#5

Here is some information from dmsg to get started. I’ll post more information as I get it.

Linux version 2.6.11-x1 (root@build-v3-kde) (gcc version 3.3.5 (Debian 1:3.3.5-8)) #1 Mon Apr 25 12:13:32 EDT 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffae000 (usable)
BIOS-e820: 000000003ffae000 - 0000000040000000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 262062
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 32686 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 DELL ) @ 0x000fdf00
ACPI: RSDT (v001 DELL CPi R 0x27d4070c ASL 0x00000061) @ 0x3fff0000
ACPI: FADT (v001 DELL CPi R 0x27d4070c ASL 0x00000061) @ 0x3fff0400
ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
Allocating PCI resources starting at 40000000 (gap: 40000000:beda0000)
Built 1 zonelists
Kernel command line: BOOT_IMAGE=Xandros_Desktop_3.0.2_Business ro root=306 quiet rw acpi=on
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2493.309 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 1x1
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1035596k/1048248k available (1663k kernel code, 12036k reserved, 773k data, 156k init, 130744k highmem)
Checking if this processor honours the WP bit even in supervisor mode… Ok.
Calibrating delay loop… 4931.58 BogoMIPS (lpj=2465792)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 0000440000000000 00000000
CPU: After vendor identify, caps: bfebf9ff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: bfebf9ff 00000000 00000000 00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel Mobile Intel® Pentium® 4 - M CPU 2.50GHz stepping 07
Enabling fast FPU save and restore… done.
Enabling unmasked SIMD FPU exception support… done.
Checking ‘hlt’ instruction… OK.
ACPI: setting ELCR to 0200 (from 0800)
checking if image is initramfs…it isn’t (no cpio magic); looks like an initrd
Freeing initrd memory: 184k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfc96e, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Routing Table [_SB
.PCI0.AGP_.PRT]
ACPI: PCI Interrupt Routing Table [_SB
.PCI0.PCIE._PRT]
Linux Plug and Play Support v0.97 © Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the “pci=routeirq” argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of “lspci” to bjorn.helgaas@hp.com
** so I can fix the driver.
pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:01: ioport range 0x800-0x805 could not be reserved
pnp: 00:01: ioport range 0x808-0x80f could not be reserved
pnp: 00:02: ioport range 0xf400-0xf4fe has been reserved
pnp: 00:02: ioport range 0x806-0x807 has been reserved
pnp: 00:02: ioport range 0x810-0x85f could not be reserved
pnp: 00:02: ioport range 0x860-0x87f has been reserved
pnp: 00:02: ioport range 0x880-0x8bf has been reserved
pnp: 00:02: ioport range 0x8c0-0x8df has been reserved
pnp: 00:07: ioport range 0x900-0x97f has been reserved
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1122894363.745:0): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
isapnp: Scanning for PnP cards…
isapnp: No Plug & Play device found
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0…
hda: FUJITSU MHT2060AT, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1…
hdc: PHILIPS DVD+RW SDVD6004, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2…
Probing IDE interface ide3…
Probing IDE interface ide4…
Probing IDE interface ide5…
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
Software Suspend Core.
Software Suspend LZF Compression Driver registered.
Software Suspend Swap Writer registered.
PM: Reading swsusp image.
PM: Resume from disk failed.
ACPI wakeup devices:
LID PBTN PCI0 USB0 USB1 USB2 USB3 MODM PCIE
ACPI: (supports S0 S1 S3 S4 S4bios S5)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (minix filesystem).
SplashFX: Loaded, VESA mode=0x0103 (800x600x8).
hda: max request size: 128KiB
hda: 117210240 sectors (60011 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 < hda5 hda6 >
Software Suspend 2.1.8.2: You need to use a resume2= command line parameter to tell Software Suspend 2 where to look for an image.
Software Suspend 2.1.8.2: Resume2 parameter is empty. Suspending will be disabled.
Software Suspend 2.1.8.2: Missing or invalid storage location (resume2= parameter). Please correct and rerun lilo (or equivalent) before suspending.
ReiserFS: hda6: found reiserfs format “3.6” with standard journal
ReiserFS: hda6: using ordered data mode
ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18,max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda6: checking transaction log (hda6)
ReiserFS: hda6: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem).
Trying to move old root to /initrd … okay
Freeing unused kernel memory: 156k freed
Adding 522072k swap on /dev/hda5. Priority:-1 extents:1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ5
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
NET: Registered protocol family 24
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
lp0: using parport0 (interrupt-driven).
Linux agpgart interface v0.100 © Dave Jones
agpgart: Detected an Intel i845 Chipset.
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: AGP aperture is 128M @ 0xe8000000
hw_random: cannot enable RNG, aborting
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ5
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49302 usecs
intel8x0: clocking to 48000
nvidia: no version for “struct_module” found: kernel tainted.
nvidia: module license ‘NVIDIA’ taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7174 Tue Mar 22 06:44:39 PST 2005
Broadcom 4401 Ethernet Driver bcm4400 ver. 3.0.8 (7/30/04)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
eth0: Broadcom BCM4401 100Base-T found at mem faffe000, IRQ 11, node addr 000bdb9e1563
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
PCI: Enabling device 0000:02:01.0 (0000 -> 0002)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:01.0 [1028:013e]
Yenta: ISA IRQ mask 0x0458, PCI irq 11
Socket status: 30000010
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt 0000:02:01.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[faffd800-faffdfff] Max Packet=[2048]
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ndiswrapper version 1.2rc1 loaded (preempt=yes,smp=no)
ndiswrapper: driver bcmwl5a (Broadcom,02/10/2005, 3.100.35.1) loaded
ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ5
ndiswrapper: using irq 5
eth1: ndiswrapper ethernet device 00:90:4b:b3:0a:a0 using driver bcmwl5a, configuration file 14E4:4320:1028:0001.5.conf
eth1: encryption modes supported: WEP, WPA with TKIP, WPA with AES/CCMP
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!
ieee1394: Host added: ID:BUS[0-00:1023] GUID[474fc00017c91061]
SCSI subsystem initialized
NTFS driver 2.1.22 [Flags: R/W MODULE].
NTFS volume version 3.1.
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 8192kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
floppy0: no floppy controllers found
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: PS/2 Generic Mouse on isa0060/serio1
ts: Compaq touchscreen protocol output
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
NTFS-fs warning (device hda2): parse_options(): Option iocharset is deprecated.Please use option nls=<charsetname> in the future.
NTFS volume version 3.1.
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 11, io base 0xbf80
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 11, io base 0xbf40
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 11, io base 0xbf20
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 11, pci mem 0xf4fffc00
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ACPI: AC Adapter [AC] (on-line)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THM] (66 C)
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PBTN]
ACPI: Sleep Button (CM) [SBTN]
ibm_acpi: ec object not found
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
acpi-cpufreq: CPU0 - ACPI performance management activated.
i8k: unable to get SMM Dell signature
i8k: unable to get SMM BIOS version
cs: IO port probe 0x100-0x4ff: excluding 0x280-0x287
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
ip_tables: © 2000-2002 Netfilter core team
ip_conntrack version 2.1 (8189 buckets, 65512 max) - 216 bytes per conntrack
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
ISO 9660 Extensions: RRIP_1991A