Need help on Bad data crc error

Just brought a new Philips dvd8801. Been doing some backup with nero using tdk dvd-r 8x max. After burning completed, i can’t open the file (it seems to hung) when i tried copying to my hdd, it shows bad data crc error. Anyone out there who has a solution to this problem? Pls advise. Thanks

Pedric

Looks like a bad burn. Unfortunately in most cases there’s no turning back from a CRC screw-up, your image is most probably unusable. Try making another backup using Verbatim DVD+R or Yuden media, then check the image with Nero CD/DVD Speed and post the results. I personaly still use the good old Norton Ghost 2003 for backups straight from DOS (to ensure that there’s no open files during the backup, I don’t trust the newer backup-from-within-Windows programs). I always perform a verification test after the backup to make sure the image is good. And Ghost is really fast when you backup to another hard disk, between SATA drives it just flies, even on highest compression.

I would agree that it sounds like a media issue. try the media suggested and dont burn at maximum speed.

Thanks for all the advice. I have only tdk dvd-r 8x TTG02 left over from my spoilt tdk 1612 drive. Is it not compatible w/ the philip/benq drive? Did a final burn w/ verification and it came up w/ read error. However, the dvd appear to work in my laptop dvd drive whereas not in the burner. The previous burn failed on both drive.

I will go & get the media as recommended but is there an compatibility problem w/ medias or is there a burn setting i set wrongly?

Below is the log file:

nil
nil
 
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM 
 
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <BENQ DW1650 DD DVD>Version: BCDC - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE>HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <BENQ DW1650 DD DVD>Version: BCDC - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE>HA 1
 
=== Scsi-Device-Map ===
DiskPeripheral : ST313030A atapi Port 0 ID 0 DMA: On 
DiskPeripheral : ST3160827AS atapi Port 1 ID 0 DMA: On 
DiskPeripheral : ST3160023AS atapi Port 2 ID 0 DMA: On 
CdRomPeripheral : BENQ DVD DD DW1650 atapi Port 3 ID 0 DMA: On 
 
=== CDRom-Device-Map ===
BENQ DVD DD DW1650 G: CDRom0
=======================
 
AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047276kB)
Free physical memory: 319MB (327504kB)
Memory in use : 68 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 
 
5.8.2006
ISO compilation
2:45:59 PM	#1 Text 0 File Isodoc.cpp, Line 6410
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate : TRUE
	Write : TRUE
	Finalize CD : TRUE
	Multisession : FALSE
	Burning mode : DAO
	Mode : 1
	ISO Level : 1 (Max. of 11 = 8 + 3 char)
	Character set : ISO 9660
	Joliet : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path : TRUE
	Write ISO9660 ;1 file extensions : TRUE
 
2:46:00 PM	#2 Text 0 File ThreadedTransfer.cpp, Line 525
	ReadBuffer-Pipe got 262144KB of Memory
 
2:46:00 PM	#3 Text 0 File Reader.cpp, Line 124
	Reader running
 
2:46:00 PM	#4 Text 0 File Writer.cpp, Line 113
	Writer G: BENQ DVD DD DW1650 running
 
2:46:00 PM	#5 ISO9660GEN -11 File Geniso.cpp, Line 3304
	First writeable address = 0 (0x00000000)
 
2:46:00 PM	#6 Text 0 File Burncd.cpp, Line 3301
	Turn on Disc-At-Once, using DVD media
 
2:46:00 PM	#7 Text 0 File DlgWaitCD.cpp, Line 277
	Last possible write address on media: 2298495 (510:46.45, 4489MB)
	Last address to be written: 2271535 (504:47.10, 4436MB)
 
2:46:00 PM	#8 Text 0 File DlgWaitCD.cpp, Line 289
	Write in overburning mode: NO (enabled: CD)
 
2:46:00 PM	#9 Text 0 File DlgWaitCD.cpp, Line 2568
	Recorder: BENQ DVD DD DW1650, Media type: DVD-R
	 Disc Manufacturer: TTG02 - 
	 Disc Application Code: 64, Disc Physical Code: 193
 
2:46:00 PM	#10 Text 0 File DlgWaitCD.cpp, Line 456
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
 
2:46:00 PM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 846
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	 2 indices, index0 (150) not provided
	 original disc pos #0 + 2271536 (2271536) = #2271536/504:47.11
	 relocatable, disc pos for caching/writing not required/ required, no patch infos
	 -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2271536 blocks [G: BENQ DVD DD DW1650]
	--------------------------------------------------------------
 
2:46:00 PM	#12 Text 0 File ThreadedTransferInterface.cpp, Line 1058
	Prepare recorder [G: BENQ DVD DD DW1650] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4652105728, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	 0 | lead-in | 0 | 0x41 | 0x00
	 0 | 1 | 0 | 0x41 | 0x00
	 0 | 1 | 1 | 0x41 | 0x00
	 2271536 | lead-out | 1 | 0x41 | 0x00
 
2:46:00 PM	#13 Text 0 File SCSIPassThrough.cpp, Line 34
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
 
2:46:00 PM	#14 Phase 24 File dlgbrnst.cpp, Line 1724
	Caching of files started
 
2:46:00 PM	#15 Text 0 File Burncd.cpp, Line 4129
	Cache writing successful.
 
2:46:00 PM	#16 Phase 25 File dlgbrnst.cpp, Line 1724
	Caching of files completed
 
2:46:00 PM	#17 Phase 32 File dlgbrnst.cpp, Line 1724
	Simulation started at 8x (11,080 KB/s)
 
2:46:06 PM	#18 Text 0 File ThreadedTransferInterface.cpp, Line 2669
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
 
2:46:06 PM	#19 Text 0 File DVDR.cpp, Line 2469
	Recording mode: Sequential Recording Mode
 
2:46:06 PM	#20 Text 0 File MMC.cpp, Line 21541
	Set BUFE: Seamless Link -> ON 
 
2:46:06 PM	#21 Text 0 File DVDR.cpp, Line 2624
	Start write address at LBA 0
	DVD high compatibility mode: Yes
 
2:46:06 PM	#22 Text 0 File Cdrdrv.cpp, Line 8385
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
	 Disc Size: 120 mm, Maximum Rate: <NOT specified>(F h)
	 Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
	 Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area: 0 h
	 End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	 Start sector number of the current Border-Out: 0 h
	 Start sector number of the next Border-In: 0 h
	 Media Specific [16..63]:
	 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
	 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
	 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
 
2:53:24 PM	#23 Text 0 File WriterStatus.cpp, Line 116
	<G: DW1650 DD DVD BENQ> start writing Lead-Out at LBA 2271536 (22A930h), length 0 blocks
 
2:53:24 PM	#24 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
 
2:53:24 PM	#25 Text 0 File DVDR.cpp, Line 2866
	EndDAO: Last written address was 2271535
 
2:54:05 PM	#26 Phase 33 File dlgbrnst.cpp, Line 1724
	Simulation completed successfully at 8x (11,080 KB/s)
 
2:54:06 PM	#27 Phase 36 File dlgbrnst.cpp, Line 1724
	Burn process started at 8x (11,080 KB/s)
 
2:54:06 PM	#28 Text 0 File ThreadedTransferInterface.cpp, Line 2669
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
 
2:54:06 PM	#29 Text 0 File DVDR.cpp, Line 2469
	Recording mode: Sequential Recording Mode
 
2:54:06 PM	#30 Text 0 File MMC.cpp, Line 21541
	Set BUFE: Seamless Link -> ON 
 
2:54:06 PM	#31 Text 0 File DVDR.cpp, Line 2624
	Start write address at LBA 0
	DVD high compatibility mode: Yes
 
2:54:06 PM	#32 Text 0 File Cdrdrv.cpp, Line 8385
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
	 Disc Size: 120 mm, Maximum Rate: <NOT specified>(F h)
	 Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
	 Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area: 0 h
	 End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	 Start sector number of the current Border-Out: 0 h
	 Start sector number of the next Border-In: 0 h
	 Media Specific [16..63]:
	 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
	 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
	 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
 
3:02:15 PM	#33 Text 0 File WriterStatus.cpp, Line 116
	<G: DW1650 DD DVD BENQ> start writing Lead-Out at LBA 2271536 (22A930h), length 0 blocks
 
3:02:15 PM	#34 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
 
3:02:15 PM	#35 Text 0 File DVDR.cpp, Line 2866
	EndDAO: Last written address was 2271535
 
3:02:39 PM	#36 Phase 37 File dlgbrnst.cpp, Line 1724
	Burn process completed successfully at 8x (11,080 KB/s)
 
3:02:39 PM	#37 Phase 78 File dlgbrnst.cpp, Line 1724
	Data verification started
 
3:07:11 PM	#38 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 19 10 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x047bf200: Len x8000
 
3:07:16 PM	#39 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 19 50 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x047bf200: Len x8000
 
3:07:16 PM	#40 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1775888 to 1775903
 
3:07:31 PM	#41 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 1A 90 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x047e0400: Len x8000
 
3:07:31 PM	#42 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1775952 to 1775967
 
3:07:36 PM	#43 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 1A D0 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x047f0c00: Len x8000
 
3:07:36 PM	#44 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1776272 to 1776287
 
3:07:41 PM	#45 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 1B 10 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x047f0c00: Len x8000
 
3:07:41 PM	#46 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1776336 to 1776351
 
3:07:46 PM	#47 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 1B 50 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x047f0c00: Len x8000
 
3:07:46 PM	#48 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1776400 to 1776415
 
3:07:53 PM	#49 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 1B D0 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x04801c00: Len x8000
 
3:07:53 PM	#50 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1776464 to 1776479
 
3:07:58 PM	#51 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 1C 10 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x04801c00: Len x8000
 
3:07:58 PM	#52 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1776592 to 1776607
 
3:08:03 PM	#53 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 1C 50 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x04812800: Len x8000
 
3:08:03 PM	#54 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1776656 to 1776671
 
3:08:08 PM	#55 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 1C 90 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x04812800: Len x8000
 
3:08:08 PM	#56 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1776720 to 1776735
 
3:08:13 PM	#57 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 1C D0 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x04823a00: Len x8000
 
3:08:13 PM	#58 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1776784 to 1776799
 
3:08:18 PM	#59 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 1D 10 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x04834400: Len x8000
 
3:08:18 PM	#60 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1776848 to 1776863
 
3:08:23 PM	#61 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 1D 50 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x04834400: Len x8000
 
3:08:23 PM	#62 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1776912 to 1776927
 
3:08:28 PM	#63 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 1D 90 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x04844600: Len x8000
 
3:08:28 PM	#64 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1776976 to 1776991
 
3:08:33 PM	#65 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 1D D0 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x04855800: Len x8000
 
3:08:33 PM	#66 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1777040 to 1777055
 
3:08:46 PM	#67 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 1E D0 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x04855800: Len x8000
 
3:08:46 PM	#68 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1777104 to 1777119
 
3:08:51 PM	#69 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 1F 10 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x04855800: Len x8000
 
3:08:51 PM	#70 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1777360 to 1777375
 
3:09:03 PM	#71 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 20 10 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x04865c00: Len x8000
 
3:09:03 PM	#72 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1777424 to 1777439
 
3:09:08 PM	#73 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 20 50 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x04877000: Len x8000
 
3:09:08 PM	#74 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1777680 to 1777695
 
3:09:12 PM	#75 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 20 90 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x04877000: Len x8000
 
3:09:12 PM	#76 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1777744 to 1777759
 
3:09:17 PM	#77 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 20 D0 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x05230200: Len x8000
 
3:09:17 PM	#78 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1777808 to 1777823
 
3:09:25 PM	#79 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 26 80 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x05230200: Len x8000
 
3:09:25 PM	#80 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1777872 to 1777887
 
3:09:29 PM	#81 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 27 00 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x05240800: Len x8000
 
3:09:29 PM	#82 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1779328 to 1779343
 
3:09:31 PM	#83 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 27 40 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x05240800: Len x8000
 
3:09:31 PM	#84 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1779456 to 1779471
 
3:09:34 PM	#85 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 27 80 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x05240800: Len x8000
 
3:09:34 PM	#86 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1779520 to 1779535
 
3:09:36 PM	#87 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 27 C0 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x05240800: Len x8000
 
3:09:36 PM	#88 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1779584 to 1779599
 
3:09:38 PM	#89 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 28 00 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x05252200: Len x8000
 
3:09:38 PM	#90 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1779648 to 1779663
 
3:09:41 PM	#91 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 28 40 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x05252200: Len x8000
 
3:09:41 PM	#92 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1779712 to 1779727
 
3:09:43 PM	#93 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 28 80 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x05262c00: Len x8000
 
3:09:43 PM	#94 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1779776 to 1779791
 
3:09:48 PM	#95 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 28 C0 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x05273e00: Len x8000
 
3:09:48 PM	#96 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1779840 to 1779855
 
3:09:51 PM	#97 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 29 00 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x05273e00: Len x8000
 
3:09:51 PM	#98 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1779904 to 1779919
 
3:09:53 PM	#99 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 29 40 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x05284000: Len x8000
 
3:09:53 PM	#100 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1779968 to 1779983
 
3:09:57 PM	#101 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 29 C0 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x052a6200: Len x8000
 
3:09:57 PM	#102 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1780032 to 1780047
 
3:09:59 PM	#103 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 2A 00 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x052a6200: Len x8000
 
3:09:59 PM	#104 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1780160 to 1780175
 
3:10:01 PM	#105 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 2A 40 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x052b6600: Len x8000
 
3:10:01 PM	#106 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1780224 to 1780239
 
3:10:05 PM	#107 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 2A C0 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x052c6e00: Len x8000
 
3:10:05 PM	#108 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1780288 to 1780303
 
3:10:10 PM	#109 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 2B 00 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x052c6e00: Len x8000
 
3:10:10 PM	#110 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1780416 to 1780431
 
3:10:13 PM	#111 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 2C 00 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x052e9000: Len x8000
 
3:10:13 PM	#112 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1780480 to 1780495
 
3:10:16 PM	#113 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 2C 40 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x052e9000: Len x8000
 
3:10:16 PM	#114 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1780736 to 1780751
 
3:10:18 PM	#115 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 2D 40 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x0530a600: Len x8000
 
3:10:18 PM	#116 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1780800 to 1780815
 
3:10:23 PM	#117 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 2F 00 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x0531b800: Len x8000
 
3:10:23 PM	#118 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1781056 to 1781071
 
3:10:35 PM	#119 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 30 30 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x0532ba00: Len x8000
 
3:10:35 PM	#120 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1781504 to 1781519
 
3:10:46 PM	#121 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 31 70 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x0533c000: Len x8000
 
3:10:46 PM	#122 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1781808 to 1781823
 
3:10:52 PM	#123 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 31 F0 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x0534c200: Len x8000
 
3:10:52 PM	#124 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1782128 to 1782143
 
3:10:58 PM	#125 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 32 70 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x0535d400: Len x8000
 
3:10:58 PM	#126 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1782256 to 1782271
 
3:11:04 PM	#127 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 32 F0 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x0536d800: Len x8000
 
3:11:04 PM	#128 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1782384 to 1782399
 
3:11:09 PM	#129 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 33 30 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x0536d800: Len x8000
 
3:11:09 PM	#130 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1782512 to 1782527
 
3:11:14 PM	#131 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 33 70 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x0536d800: Len x8000
 
3:11:14 PM	#132 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1782576 to 1782591
 
3:11:19 PM	#133 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 33 B0 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x0537ec00: Len x8000
 
3:11:19 PM	#134 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1782640 to 1782655
 
3:11:27 PM	#135 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 34 30 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x05390000: Len x8000
 
3:11:27 PM	#136 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1782704 to 1782719
 
3:11:36 PM	#137 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 35 30 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x053a0200: Len x8000
 
3:11:36 PM	#138 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1782832 to 1782847
 
3:11:46 PM	#139 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 36 30 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x053b1400: Len x8000
 
3:11:46 PM	#140 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1783088 to 1783103
 
3:11:51 PM	#141 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 36 B0 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x053b1400: Len x8000
 
3:11:51 PM	#142 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1783344 to 1783359
 
3:12:00 PM	#143 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 37 B0 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x053c1800: Len x8000
 
3:12:00 PM	#144 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1783472 to 1783487
 
3:12:09 PM	#145 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 38 B0 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x053d1c00: Len x8000
 
3:12:09 PM	#146 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1783728 to 1783743
 
3:12:13 PM	#147 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 38 F0 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x053d1c00: Len x8000
 
3:12:13 PM	#148 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1783984 to 1783999
 
3:12:21 PM	#149 Phase 40 File dlgbrnst.cpp, Line 1411
	Aborted by user
 
3:12:21 PM	#150 SPTI -1128 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x00
	CDB Data: 0x28 00 00 1B 3A 70 00 00 10 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 11 
	Buffer x053e1e00: Len x8000
 
3:12:21 PM	#151 SectorVerify 20 File Cdrdrv.cpp, Line 9505
	Read errors from sector 1784048 to 1784063
 
 
Existing drivers:
 
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

I haven’t had the patience to read all that my friend, but you should get better results with the media I mentioned before. Here is some basic advice:

Don’t go very cheap because very cheap Verbatims or Yudens may be fakes. If they’re too cheap to be true, then they probably are. Also it doesn’t matter if the backup you burned loads on the laptop, if it fails CRC its useless as you will not be able to restore your hard drive from that disc.

Burn under minimal system load conditions (this is especially true if you have anything less than 1gig of RAM).

Go to Control Panel, double-click System, select the Hardware tab, click Device Manager, and under IDE/ATA/ATAPI Controllers find the one that your Philips is connected to and check its properties. The transfer mode should be Ultra DMA Mode 2. If PIO is selected it means that your burner is reduced to a slower tranfer mode that is not optimal and can cause problems. You MUST change that to Ultra DMA Mode 2, this is VERY important.

Make sure your C drive is not fragmented and not completely full before you backup. Delete any temporary files (you don’t want to backup useless junk). A friend of mine had 6 gigabytes worth of useless temp files and it took him two DVDs to backup, whereas if he deleted the junk beforehand he’d have a cleaner, smaller backup.

Don’t surf the net, (go off-line altogether), then turn off antivirus, firewall, and make sure there aren’t any other programs running in the background before you backup.

Unless you have a powerful dual core sytem (like mine… :bigsmile: ) it’s best to leave the computer alone when you burn, and even then I personaly don’t take chances, I still leave my rig alone to burn in peace.

After backup is complete make sure that you verify the burn. I mean to verify the image file that is on the disc. That’s why I use Ghost: It performs a CRC32 chek on the compressed image itself, because the image could have errors regardless if the burn is good or not (this is down to file corruption that can take place during backup compression). In such a case you are able to copy the image from the disc to your hard drive without errors, but the image itself as a compressed file is faulty and will give you errors when trying to restore from it, it has nothing to do with the burn itself. If I were you I’d give Ghost a try, as it CRC32-checks the image for fire corruption and it also completely exits Windows and backus up from DOS (a DOS backup ensures that there are no open files in C during the backup).

I hope I didn’t just repeat stuff you already know! Good luck!