Need Help NEC ND-3500AG can't burn in DAO mode

vbimport

#1

Hey, I need your help. My NEC ND-3500 drive has failed repeatedly when i tried to burn some iso’s i have to cds using Nero Burning Rom in Disc at Once mode, but worked in Track at Once mode. I have no idea why this is happening since my other burner can burn the same iso files to cds using disc at once mode. I’m afraid that this might be the beginning of the end of the NEC drive. :frowning: please help.

Here’s the Log:

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.7.5.1
Internal Version: 7, 7, 5, 1

Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.16 - HA 1 TA 0 - 7.7.5.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SJ7553Y UNL211M >Version: 1.0 - HA 1 TA 2 - 7.7.5.1
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Storage iaStor Port 0 ID 0 DMA: On
DiskPeripheral : System iaStor Port 0 ID 1 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-3500AG atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : SJ7553Y UNL211M 1.0 avqqvahf Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-3500AG E: CDRom0
LITE-ON DVDRW SOHW-1633S F: CDRom1
SJ7553Y UNL211M G: CDRom2

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2029MB (2078424kB)
Free physical memory: 1303MB (1334544kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.3.2007
CD Image
7:45:24 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

7:45:24 PM #2 Text 0 File Burncd.cpp, Line 3163
_NEC DVD_RW ND-3500AG
Buffer underrun protection activated

7:45:24 PM #3 Text 0 File Burncd.cpp, Line 3465
Turn on Disc-At-Once, using CD-R/RW media

7:45:52 PM #4 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 333461 ( 74:08.11)

7:45:52 PM #5 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

7:45:52 PM #6 Text 0 File DlgWaitCD.cpp, Line 2912
Recorder: _NEC DVD_RW ND-3500AG;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

7:45:52 PM #7 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc for simulation.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)

7:45:52 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 823
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 333462 (333462) = #333462/74:6.12
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 333312 blocks [E: _NEC DVD_RW ND-3500AG]
--------------------------------------------------------------

7:45:52 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1026
Prepare [E: _NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 683237376, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 333462 | 333162 | 0x00
0 | 1 | 1 | 0x41 | 333462 | 333312 | 0x00
333462 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

7:45:52 PM #10 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

7:45:52 PM #11 Phase 24 File dlgbrnst.cpp, Line 1760
Caching of files started

7:45:52 PM #12 Text 0 File Burncd.cpp, Line 4298
Cache writing successful.

7:45:52 PM #13 Phase 25 File dlgbrnst.cpp, Line 1760
Caching of files completed

7:45:52 PM #14 Phase 28 File dlgbrnst.cpp, Line 1760
Speed measurement started

7:45:52 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

7:45:59 PM #16 Text 0 File WriterStatus.cpp, Line 113
<E: _NEC DVD_RW ND-3500AG> start writing Lead-Out at LBA 333312 (51600h), length 0 blocks

7:45:59 PM #17 Phase 29 File dlgbrnst.cpp, Line 1709
Speed measurement completed: 602.8x (90,430 KB/s)

7:45:59 PM #18 Phase 32 File dlgbrnst.cpp, Line 1760
Simulation started at 48x (7,200 KB/s)

7:45:59 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

7:45:59 PM #20 Text 0 File MMC.cpp, Line 17584
StartDAO : CD-Text - Off

7:45:59 PM #21 Text 0 File MMC.cpp, Line 22250
Set BUFE: Buffer underrun protection -> ON

7:46:00 PM #22 Text 0 File MMC.cpp, Line 17812
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 4a 08 0c

7:48:23 PM #23 Text 0 File WriterStatus.cpp, Line 113
<E: _NEC DVD_RW ND-3500AG> start writing Lead-Out at LBA 333312 (51600h), length 0 blocks

7:48:24 PM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 05 16 02 0A 00 00 00 00 0C

7:48:24 PM #25 CDR -1135 File ThreadedTransferInterface.cpp, Line 1926
Write error
E: _NEC DVD_RW ND-3500AG

7:48:24 PM #26 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1926
Could not perform end of Disc-at-once

7:48:24 PM #27 CDR -201 File WriterStatus.cpp, Line 162
Invalid write state
E: _NEC DVD_RW ND-3500AG

7:48:24 PM #28 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

7:48:24 PM #29 Phase 34 File dlgbrnst.cpp, Line 1760
Simulation failed at 48x (7,200 KB/s)

7:48:24 PM #30 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

7:48:28 PM #31 Text 0 File Cdrdrv.cpp, Line 10529
DriveLocker: UnLockVolume completed

7:48:28 PM #32 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#2

Welcome to cdfreaks. :slight_smile:

Recorder: <_NEC DVD_RW ND-3500AG> Version: [B]2.16 [/B]- HA 1 TA 0 - 7.7.5.1

Time for firmware update, latest is 2.1b

7:45:59 PM #18 Phase 32 File dlgbrnst.cpp, Line 1760
Simulation started at 48x (7,200 KB/s)...
..............................
7:48:24 PM #29 Phase 34 File dlgbrnst.cpp, Line 1760
Simulation failed at 48x (7,200 KB/s)

Enable [I]burning[/I] not simulation.
Lower the burn speed if problem persist.

DiskPeripheral : System iaStor Port 0 ID 1 [B]DMA: Off[/B]

Make sure all of your physical drives run in UDMA mode

BTW you can also burn CD iso images with DVDDecrypter. Never failed on my ND-3500.

Happy burning. :wink:


#3

haha, yes i know it’s a simulation, however i made about 10 coasters and decided just to run simulations until i get it figured out to save the discs. I flashed the drive to version 2.1b as indicated, and tried burning at 8X but unfortunately i still cannot burn an iso to cd in DAO mode. It works in TAO, but i don’t know why it doesn’t work in DAO. As for the DMA mode, i’m still trying to figure out how to turn it on, I use a RAID array with two SATA raptor drives for the System volume, and two maxtors in RAID for the Storage volume in mode RAID 0 striped pairs.

Would anyone happen to know how to enable UDMA for a RAID array using an Intel IC8R/DO/DH SATA RAID Controller?

Also, here’s the log of a failed write, not a simulation:

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.7.5.1
Internal Version: 7, 7, 5, 1

Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.1B - HA 1 TA 4 - 7.7.5.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SJ7553Y UNL211M >Version: 1.0 - HA 1 TA 2 - 7.7.5.1
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Storage iaStor Port 0 ID 0 DMA: On
DiskPeripheral : System iaStor Port 0 ID 1 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-3500AG atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : SJ7553Y UNL211M 1.0 awl0rt6u Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-3500AG E: CDRom4
LITE-ON DVDRW SOHW-1633S F: CDRom1
SJ7553Y UNL211M G: CDRom2

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2029MB (2078424kB)
Free physical memory: 1304MB (1335992kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.3.2007
CD Image
11:54:20 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

11:54:20 PM #2 Text 0 File Burncd.cpp, Line 3163
_NEC DVD_RW ND-3500AG
Buffer underrun protection activated

11:54:20 PM #3 Text 0 File Burncd.cpp, Line 3465
Turn on Disc-At-Once, using CD-R/RW media

11:54:32 PM #4 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 323909 ( 72:00.59)

11:54:32 PM #5 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

11:54:32 PM #6 Text 0 File DlgWaitCD.cpp, Line 2912
Recorder: _NEC DVD_RW ND-3500AG;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

11:54:32 PM #7 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:54:32 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 823
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 323910 (323910) = #323910/71:58.60
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 323760 blocks [E: _NEC DVD_RW ND-3500AG]
--------------------------------------------------------------

11:54:32 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1026
Prepare [E: _NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 663674880, ISRC ""
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 323910 | 323610 | 0x00
0 | 1 | 1 | 0x41 | 323910 | 323760 | 0x00
323910 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

11:54:32 PM #10 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

11:54:32 PM #11 Phase 24 File dlgbrnst.cpp, Line 1760
Caching of files started

11:54:32 PM #12 Text 0 File Burncd.cpp, Line 4298
Cache writing successful.

11:54:32 PM #13 Phase 25 File dlgbrnst.cpp, Line 1760
Caching of files completed

11:54:32 PM #14 Phase 28 File dlgbrnst.cpp, Line 1760
Speed measurement started

11:54:32 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

11:54:34 PM #16 Text 0 File WriterStatus.cpp, Line 113
<E: _NEC DVD_RW ND-3500AG> start writing Lead-Out at LBA 323760 (4F0B0h), length 0 blocks

11:54:34 PM #17 Phase 29 File dlgbrnst.cpp, Line 1709
Speed measurement completed: 3785x (567,764 KB/s)

11:54:34 PM #18 Phase 36 File dlgbrnst.cpp, Line 1760
Burn process started at 8x (1,200 KB/s)

11:54:34 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

11:54:34 PM #20 Text 0 File MMC.cpp, Line 17584
StartDAO : CD-Text - Off

11:54:34 PM #21 Text 0 File MMC.cpp, Line 22250
Set BUFE: Buffer underrun protection -> ON

11:54:34 PM #22 Text 0 File MMC.cpp, Line 17812
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 48 00 3c

12:04:03 AM #23 Text 0 File WriterStatus.cpp, Line 113
<E: _NEC DVD_RW ND-3500AG> start writing Lead-Out at LBA 323760 (4F0B0h), length 0 blocks

12:04:04 AM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 04 F0 B1 0A 00 00 00 00 0C

12:04:04 AM #25 CDR -1135 File ThreadedTransferInterface.cpp, Line 1926
Write error
E: _NEC DVD_RW ND-3500AG

12:04:04 AM #26 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1926
Could not perform end of Disc-at-once

12:04:04 AM #27 CDR -201 File WriterStatus.cpp, Line 162
Invalid write state
E: _NEC DVD_RW ND-3500AG

12:04:04 AM #28 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

12:04:04 AM #29 Phase 38 File dlgbrnst.cpp, Line 1760
Burn process failed at 8x (1,200 KB/s)

12:04:04 AM #30 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

12:04:07 AM #31 Text 0 File Cdrdrv.cpp, Line 10529
DriveLocker: UnLockVolume completed

12:04:07 AM #32 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)