NEC ND-3540A Results Thread (Post your ND-3540A scans here)

vbimport

#274

roadworker: Also depends on ECC… LiteOn is scanning at 1 ECC, Nec 3520 at 8 ECC (if not set to 1 ECC).


#275

True,but I noticed that by using CDSpeed 4 and 8X ECC,you get always a 95 % quality score if your PIF doesn’t go higher than 9, it doesn’t matter if there are 1000 of those errors or 5000 on the disc…
A scan with a total of 2OO PI failures and only 1 PIF that goes higher than 9,immediatly drops % quality-wise…people would think that 1000 of PI failures at value 9 give a worse disc quality than a scan with 200 PIF with 1 spike that goes up to 10…but it’s the opposite… :confused:


#276

I can’t estimate this burn as “excellent” with so high PI level.
Moreover, high PIF spike is stable.


#277

DVD-R Verbatim 8x (MCC 02RG20), jewel.
F/w 1.01 stock, 8x burn, 8ECC scan.


#278

DVD+R 4x Optodisc OR4, Digitex branded, cake box 10.
F/w 1.01 stock, 4x burn, 8ECC scan.



#279

DVD-R 8x Prodisc S04, eProFormance branded.
F/w 1.01 stock, 8x burn, 8ECC scan.



#280

DVD+R 4x RICOHJPN R01, Sony branded, cake 25.
F/w 1.01 stock, 8x burn, 8ECC scan.


#281

DVD-R 8x Sony AccuCore (Sony08D1), cake 10.
F/w 1.01 stock, 16x burn, 8ECC scan.
It’s a steady burn for 16x.



#282

DVD+R 8x Infome-R20, Philips branded.
F/w 1.01 stock, 8x burn, 8ECC scan.
It’s a pleasant surprise.


#283

DVD-R 4x Ritek G04, bulk printable, very cheap.
F/w 1.01 stock, 4x burn, 8ECC scan.



#284

DVD+R Verbatim 16x (MCC004), cake 10.
F/w 1.01 stock, 12x burn, 1ECC scan.


#285

FujiFilm DVD+R 8x (Yuden000T02 TG001159) burned at 12x using f/w 1.01e


#286

PIF spike is just a reading glitch. PIE is being reported way overblown by NEC, so you cant trust it.


#287

datawrite orange
cmc mag e01 @ 12x


#288

#289

#290

#291

#292

#293