NEC ND-3500AG Could not perform end of Disc-at-once Error

vbimport

#1

Hello,

I’m having problems with my NEC ND-3500AG DVD writer and I need some help please.

It used to work perfectly untill I formatted my harddisk and re-installed windows.

I use the 21A firmware and Nero 7.0.1.2.

I’ve tried several media types (which always worked before), but it doesn’t seem to mather which one I use.

I get an ‘Unspecified error’ and it can’t perform the end of Disc-at-once.
(I’ve included the Nero Error Log, see bottom)

The error presents itself usually at the beginning of the writing process, but it can also be later in the process. I also have to note that when my computer is restarted, the error seems to have disappeared and I can burn normally, but after a while it comes back.

Can someone please help me with this annoying problem?

Much thanks in advance…

With Kind Regards,

Piet Steur, The Netherlands

Nero Error Log:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 2-11-2004 13:54:32

NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
(Nero Express)
Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.1A - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVD SOHD-16P9SV >Version: F$01 - HA 1 TA 1 - 7.0.1.2
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800JB-00JJA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-00EVA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-3500AG atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVD SOHD-16P9SV atapi Port 1 ID 1 DMA: On
CdRomPeripheral : LG2213T GSP875D 2.0B vaxscsi Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-3500AG E: CDRom0
LITE-ON DVD SOHD-16P9SV F: CDRom1
LG2213T GSP875D H: CDRom2

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785888kB)
Free physical memory: 378MB (387240kB)
Memory in use : 50 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

28.3.2006
DVD snelkopiëren (on-the-fly)
15:49:19 #1 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

15:49:19 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory

15:49:19 #3 Text 0 File Reader.cpp, Line 124
Reader running

15:49:19 #4 Text 0 File Writer.cpp, Line 113
Writer E: _NEC DVD_RW ND-3500AG running

15:49:19 #5 Text 0 File DVDCopy.cpp, Line 292
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 1758080 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

15:49:19 #6 Text 0 File DVDCopy.cpp, Line 405
Max -1 tracks of 1 allowed to copy
1: 0 - 1758080 = 1758080, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

15:49:19 #7 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media

15:49:19 #8 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1758079 (390:41.04, 3433MB)

15:49:19 #9 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

15:49:19 #10 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193

15:49:19 #11 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

15:49:19 #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (modus 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1758080 (1758080) = #1758080/390:41.5
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1758080 blocks [E: _NEC DVD_RW ND-3500AG]
--------------------------------------------------------------

15:49:19 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3600547840, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep
____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1758080 | lead-out | 1 | 0x41 | 0x00

15:49:19 #14 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

15:49:19 #15 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5.540 kB/sec)

15:49:19 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

15:49:19 #17 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode

15:49:19 #18 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON

15:49:19 #19 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes

15:49:19 #20 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16…63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0…
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …þ…ÿ…
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

15:49:35 #21 CDR -1 File Writer.cpp, Line 302
Unspecified Recorder Error
E: _NEC DVD_RW ND-3500AG

15:49:35 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

15:49:35 #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

15:49:35 #24 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was -1

15:49:35 #25 CDR -1 File WriterStatus.cpp, Line 167
Unspecified Recorder Error
E: _NEC DVD_RW ND-3500AG

15:49:35 #26 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

15:49:35 #27 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 4x (5.540 kB/sec)

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#2

Please ask an moderator to remove the Nero serial (starting with 1C82-).

Update Nero 7 to the latest version and try again.


#3

Fixed


#4

Thanks!


#5

Sorry for the inconvenience, I didn’t see the serial :o :doh:

Thanks for the suggestion to update to a newer version, I will try this immediately :slight_smile:


#6

I’ve updated windows and got the latest version of Nero. I did not encounter the error for a while but it has turned up just now. Does anyone have any other suggestions? Can it be something else?

With Kind Regards,

Piet Steur, The Netherlands


#7

You should not use OTF copying for DVD with Nero, in my opinion.

Just perform a normal burn on a dvd with verify and post the logfile (no serial) here.

And probably you should use better media than this:

15:49:19 #10 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193


#8

Hello chef,
I use different types of media, for different purposses and with one I need the RITEK media. I also get the error with the OPTODISC OR8 media. Both media types never gave any problems, also on the fly never gave any errors.
Included is a log file with the error with the OPTODISC media. This was created when burning an image from my harddisc.
I will now copy a normal dvd without OTF, with verify on, 4x (I always use 4x) and with the OPTODISC media. I will post the logfile in a new reply below this one.

With Kind Regards,

Piet Steur

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 2-11-2004 12:54:32

NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2
(Nero Express)
Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.1A - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVD SOHD-16P9SV >Version: F$01 - HA 1 TA 1 - 7.0.8.2
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800JB-00JJA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-00EVA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-3500AG atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVD SOHD-16P9SV atapi Port 1 ID 1 DMA: On
CdRomPeripheral : LG2213T GSP875D 2.0B vaxscsi Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-3500AG E: CDRom0
LITE-ON DVD SOHD-16P9SV F: CDRom1
LG2213T GSP875D H: CDRom2

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 767MB (785888kB)
Free physical memory: 419MB (429440kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

3.4.2006
Burn DVD Image
23:07:22 #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory

23:07:22 #2 Text 0 File Reader.cpp, Line 124
Reader running

23:07:22 #3 Text 0 File Writer.cpp, Line 113
Writer E: _NEC DVD_RW ND-3500AG running

23:07:22 #4 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media

23:07:22 #5 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2294439 (509:52.39, 4481MB)

23:07:22 #6 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

23:07:22 #7 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD+R

23:07:22 #8 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

23:07:22 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2294440 (2294440) = #2294440/509:52.40
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2294440 blocks [E: _NEC DVD_RW ND-3500AG]
--------------------------------------------------------------

23:07:22 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4699013120, ISRC ""
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep
____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2294440 | lead-out | 1 | 0x41 | 0x00

23:07:22 #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

23:07:22 #12 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

23:07:22 #13 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

23:07:23 #14 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.

23:07:23 #15 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

23:07:23 #16 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5.540 KB/s)

23:07:23 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

23:07:23 #18 SPTI -1066 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x05051400: Len x804

23:07:23 #19 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: No

23:21:40 #20 Text 0 File WriterStatus.cpp, Line 116
<E: _NEC DVD_RW ND-3500AG> start writing Lead-Out at LBA 2294440 (2302A8h), length 0 blocks

23:21:40 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

23:21:40 #22 SPTI -1135 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 23 02 A0 00 00 10 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x034d8e00: Len x8000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

23:21:40 #23 SPTI -1176 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 06 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03

23:21:40 #24 CDR -1135 File ThreadedTransferInterface.cpp, Line 1937
Write error
E: _NEC DVD_RW ND-3500AG

23:21:40 #25 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1937
Could not perform end of Disc-at-once

23:21:40 #26 SPTI -1135 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C

23:21:40 #27 SPTI -1176 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 06 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03

23:21:40 #28 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error
E: _NEC DVD_RW ND-3500AG

23:21:40 #29 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

23:21:40 #30 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (5.540 KB/s)

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#9

Here is the normal dvd copy log without on the fly, with verify on, 4x (I always use 4x) and with the OPTODISC media. It was succesfull, and I did not restart my computer :smiley:
Hope this helps in finding the solution…

With kind regards,

Piet Steur

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 2-11-2004 12:54:32

NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2
(Nero Express)
Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.1A - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVD SOHD-16P9SV >Version: F$01 - HA 1 TA 1 - 7.0.8.2
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800JB-00JJA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-00EVA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-3500AG atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVD SOHD-16P9SV atapi Port 1 ID 1 DMA: On
CdRomPeripheral : LG2213T GSP875D 2.0B vaxscsi Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-3500AG E: CDRom0
LITE-ON DVD SOHD-16P9SV F: CDRom1
LG2213T GSP875D H: CDRom2

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 767MB (785888kB)
Free physical memory: 546MB (559172kB)
Memory in use : 28 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

4.4.2006
===== Disc-Copy over image - 1st step : Copy to image …

17:57:15 #1 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

17:57:15 #2 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

17:57:15 #3 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 192KB of Memory

17:57:15 #4 Text 0 File Reader.cpp, Line 124
Reader running

17:57:15 #5 Text 0 File Writer.cpp, Line 113
Writer Image Recorder running

17:57:15 #6 Text 0 File DVDCopy.cpp, Line 292
DVD Track-Information from source disc:
Media Type: DVD+R
S01 T01 Con 0x14 Start 0 Len 1997392 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

17:57:15 #7 Text 0 File DVDCopy.cpp, Line 405
Max -1 tracks of 1 allowed to copy
1: 0 - 1997392 = 1997392, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

17:57:15 #8 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media

17:57:15 #9 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 1997391 (443:51.66, 3901MB)

17:57:15 #10 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

17:57:15 #11 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

17:57:15 #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1997392 (1997392) = #1997392/443:51.67
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1997392 blocks [Image Recorder]
--------------------------------------------------------------

17:57:15 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4090658816, ISRC ""
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1997392 | lead-out | 1 | 0x41 | 0x00

17:57:15 #14 Phase 120 File dlgbrnst.cpp, Line 1730
Creating the image for burning

17:57:15 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

18:06:56 #16 Text 0 File WriterStatus.cpp, Line 116
<Image Recorder> start writing Lead-Out at LBA 1997392 (1E7A50h), length 0 blocks

18:06:56 #17 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

18:06:56 #18 Phase 121 File dlgbrnst.cpp, Line 1730
Creating Image completed successfully

===== Disc-Copy over image - 2nd step : Burn the image …

18:07:01 #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory

18:07:01 #2 Text 0 File Reader.cpp, Line 124
Reader running

18:07:01 #3 Text 0 File Writer.cpp, Line 113
Writer E: _NEC DVD_RW ND-3500AG running

18:07:01 #4 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1’
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4090658816
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=443:51.67 ( 1997392) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Uitpakken\TempImage.nrg>

18:07:01 #5 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media

18:07:02 #6 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1997391 (443:51.66, 3901MB)

18:07:02 #7 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

18:07:02 #8 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD+R

18:07:02 #9 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

18:07:02 #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 1997392 (1997392) = #1997392/443:51.67
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1997392 blocks [E: _NEC DVD_RW ND-3500AG]
--------------------------------------------------------------

18:07:02 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4090658816, ISRC ""
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep
____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1997392 | lead-out | 1 | 0x41 | 0x00

18:07:02 #12 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

18:07:02 #13 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

18:07:02 #14 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5.540 KB/s)

18:07:02 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

18:07:02 #16 SPTI -1066 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x034d3200: Len x804

18:07:02 #17 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: No

18:19:36 #18 Text 0 File WriterStatus.cpp, Line 116
<E: _NEC DVD_RW ND-3500AG> start writing Lead-Out at LBA 1997392 (1E7A50h), length 0 blocks

18:19:36 #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

18:20:06 #20 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 4x (5.540 KB/s)

18:20:06 #21 Phase 78 File dlgbrnst.cpp, Line 1730
Data verification started

18:26:51 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

18:26:51 #23 Phase 80 File dlgbrnst.cpp, Line 1730
Data verification completed successfully

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#10

Mh, Nero 7 seems to be still $ucky.

Maybe you would try with ImgBurn. :wink: