NEC ND-2500A & Nero gets Fixation error and fails buning

I am trying to burn a cd with Nero6 but although burning finishes at the end i get a burning failure. My log mentions a ‘fixation error’. Can someone please advice me on what to do? My drive is a NEC DVD-RW ND-2500A and herefollows the nero log file:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34

μμ
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e

Recorder: <_NEC DVD_RW ND-2500A> Version: 1.06 - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DV-5800B >Version: G9H3 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DV-5800B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
_NEC DV-5800B E: CDRom0
_NEC DVD_RW ND-2500A T: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490996kB)
Free physical memory: 96MB (99144kB)
Memory in use : 79 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.1.2006
CD-ROM (ISO)
8:32:14 μμ #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

8:32:14 μμ #2 Text 0 File Burncd.cpp, Line 2948
_NEC DVD_RW ND-2500A
Buffer underrun protection activated

8:32:14 μμ #3 Text 0 File Reader.cpp, Line 127
Reader running

8:32:14 μμ #4 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-2500A running

8:32:14 μμ #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

8:32:14 μμ #6 Text 0 File Burncd.cpp, Line 3233
Turn on Track-At-Once, using CD-R/RW media

8:32:36 μμ #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 352686 ( 78:24.36)

8:32:36 μμ #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

8:32:36 μμ #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-2500A;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 2B 00 D0 (invalid), 2: 3D B8 00 (invalid), 3: 22 D2 80 (invalid)

8:32:36 μμ #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)

8:32:36 μμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 352687 (352687) = #352687/78:22.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 352685 blocks [_NEC DVD_RW ND-2500A]
--------------------------------------------------------------

8:32:36 μμ #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [NEC DVD_RW ND-2500A] for write in TAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 722610176, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep
____
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
352687 | lead-out | 1 | 0x41 | 0x00

8:32:36 μμ #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 2 run-out blocks from end of track 1. Length: 352687 -> 352685.

8:32:36 μμ #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

8:32:36 μμ #15 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

8:32:36 μμ #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

8:32:36 μμ #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 32x (4.800 KB/s)

8:32:36 μμ #18 SCSI -1189 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03935000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x02

8:32:36 μμ #19 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:32:36 μμ #20 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON

8:36:55 μμ #21 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03D60000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x04 0xEC 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x04 0xEA 0x1A 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

8:36:55 μμ #22 CDR -1135 File Writer.cpp, Line 311
Write error

8:36:55 μμ #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

8:36:55 μμ #24 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
_NEC DVD_RW ND-2500A\H1 T1

8:36:55 μμ #25 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack

8:36:55 μμ #26 Text 0 File Mmc.cpp, Line 16452
<_NEC DVD_RW ND-2500A > start Close Session

8:36:55 μμ #27 SCSI -1176 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x04

8:36:55 μμ #28 CDR -1176 File WriterStatus.cpp, Line 249
Session fixation error

8:36:55 μμ #29 TRANSFER -19 File WriterStatus.cpp, Line 249
Could not perform Fixation

8:36:55 μμ #30 Text 0 File WriterStatus.cpp, Line 258
falling back to disc fixation

8:36:55 μμ #31 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 32x (4.800 KB/s)

Existing drivers:
File ‘Drivers\atapi.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 10:59:44 μμ

(Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

DMa is OFF and OS low on memory.

Enabled DMA frm system properties, burned another cd and it failed again… Does it need a restart for DMA to be enabled?
R these 2 the only reasons u find in the above error?

P.S. Thanks for prompt reply… Congrats for the forum :wink:

I am trying to enable DMA (by selecting DMA if available) and even if i restart it remains at PIO state… How else can i enable DMA?
My burner is on Secondary IDE as a slave though (Master is my DVD-ROM)
Can u help pls?

Swap the drives and replace the IDE cable.

Isnt there any other way to avoid burning CDs, as it is really hard at the moment to ‘open’ that PC… Will it keep burning CDs and DVDs if i let it like that?
I didnt always have that prob

Use a proper burning app, Nero has many bugs - always.

I would flash the drive with another firmware too, I’d recommend: 25x0_2F9_RPC+RL.rar NEC ND-25x0A 2.F9 with RPC1 and Riplock removed
from http://www.micheldeboer.nl/firmware/25x0.html
You can use BINFLASH as the flasher.

A godd idea is to try with other branded media and to burn at lower speeds (also use verify).

1 - Start–>Control Panel–>System–>Hardware–>Device Manager;
2 - IDE ATA/ATAPI Controller;
3 - Right-click on Secondary IDE;
4 - Left-click on ‘Remove/Uninstall’;
5 - Reboot;
6 - most likely you’re done!
HTH

Will give a go to Stargate64’s solutions and report back…
Many thanks for ur replies guys :wink:

Edit: Remove the device from the Device Manager rebooted, XP found the device, rebooted again but still DMA is off.
Also gone into BIOS and all DMA settings for Primary and Secondary r in auto…

take them off auto and choose udma 2 for the controller it is on

I completely removed the DVD DRIVE and now only have the HDD as PRIMARY MASTER and the DVDROM as SECONDARY MASTER.
However… IT KEEPS FAILING… :frowning: :frowning: :frowning:
Also DMA is on and changed media… :frowning:

And here is my new log file…: :confused:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 μμ
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e

Recorder: <_NEC DVD_RW ND-2500A> Version: 1.06 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD_RW ND-2500A >Version: 1.06 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
_NEC DVD_RW ND-2500A E: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490996kB)
Free physical memory: 138MB (141704kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.1.2006
CD-ROM (ISO)
8:21:49 μμ #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

8:21:49 μμ #2 Text 0 File Burncd.cpp, Line 2948
_NEC DVD_RW ND-2500A
Buffer underrun protection activated

8:21:49 μμ #3 Text 0 File Reader.cpp, Line 127
Reader running

8:21:49 μμ #4 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-2500A running

8:21:49 μμ #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

8:21:49 μμ #6 Text 0 File Burncd.cpp, Line 3233
Turn on Track-At-Once, using CD-R/RW media

8:21:49 μμ #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 352731 ( 78:25.06)

8:21:49 μμ #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

8:21:49 μμ #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-2500A;
CDR code: 00 97 15 05; OSJ entry from: TDK Corporation
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 0F 05 (LI 97:15.05), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

8:21:49 μμ #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

8:21:49 μμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 352732 (352732) = #352732/78:23.7
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 352730 blocks [_NEC DVD_RW ND-2500A]
--------------------------------------------------------------

8:21:49 μμ #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [NEC DVD_RW ND-2500A] for write in TAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 722702336, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep
____
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
352732 | lead-out | 1 | 0x41 | 0x00

8:21:49 μμ #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 2 run-out blocks from end of track 1. Length: 352732 -> 352730.

8:21:49 μμ #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

8:21:49 μμ #15 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

8:21:49 μμ #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

8:21:49 μμ #17 Phase 28 File dlgbrnst.cpp, Line 1832
Speed measurement started

8:21:49 μμ #18 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:22:18 μμ #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

8:22:18 μμ #20 Phase 29 File dlgbrnst.cpp, Line 1781
Speed measurement completed: 176.4x (26.464 KB/s)

8:22:18 μμ #21 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 32x (4.800 KB/s)

8:22:18 μμ #22 SCSI -1189 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03925400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x02

8:22:18 μμ #23 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:22:18 μμ #24 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON

8:25:29 μμ #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

8:25:31 μμ #26 Text 0 File Mmc.cpp, Line 16452
<_NEC DVD_RW ND-2500A > start Close Session

8:26:01 μμ #27 SCSI -1135 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x05 0x61 0xDC 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

8:26:01 μμ #28 CDR -1135 File ThreadedTransferInterface.cpp, Line 1294
Write error

8:26:01 μμ #29 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1294
Could not perform Fixation

8:26:01 μμ #30 Text 0 File Mmc.cpp, Line 16452
<_NEC DVD_RW ND-2500A > start Close Session

8:26:34 μμ #31 SCSI -1135 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x05 0x61 0xDC 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

8:26:34 μμ #32 CDR -1135 File ThreadedTransferInterface.cpp, Line 1294
Write error

8:26:34 μμ #33 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1294
Could not perform Fixation

8:26:34 μμ #34 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 32x (4.800 KB/s)

Existing drivers:
File ‘Drivers\atapi.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 10:59:44 μμ (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

And here another log when tried to burn at lower speed (x20)

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 μμ
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e

Recorder: <_NEC DVD_RW ND-2500A> Version: 1.06 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD_RW ND-2500A >Version: 1.06 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
_NEC DVD_RW ND-2500A E: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490996kB)
Free physical memory: 127MB (130072kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.1.2006
CD-ROM (ISO)
8:29:31 μμ #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

8:29:31 μμ #2 Text 0 File Burncd.cpp, Line 2948
_NEC DVD_RW ND-2500A
Buffer underrun protection activated

8:29:31 μμ #3 Text 0 File Reader.cpp, Line 127
Reader running

8:29:31 μμ #4 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-2500A running

8:29:31 μμ #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

8:29:31 μμ #6 Text 0 File Burncd.cpp, Line 3233
Turn on Track-At-Once, using CD-R/RW media

8:29:31 μμ #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 352731 ( 78:25.06)

8:29:31 μμ #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

8:29:31 μμ #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-2500A;
CDR code: 00 97 15 05; OSJ entry from: TDK Corporation
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 0F 05 (LI 97:15.05), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

8:29:31 μμ #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

8:29:31 μμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 352732 (352732) = #352732/78:23.7
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 352730 blocks [_NEC DVD_RW ND-2500A]
--------------------------------------------------------------

8:29:31 μμ #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [NEC DVD_RW ND-2500A] for write in TAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 722702336, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep
____
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
352732 | lead-out | 1 | 0x41 | 0x00

8:29:31 μμ #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 2 run-out blocks from end of track 1. Length: 352732 -> 352730.

8:29:31 μμ #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

8:29:32 μμ #15 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

8:29:32 μμ #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

8:29:32 μμ #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 20x (3.000 KB/s)

8:29:32 μμ #18 SCSI -1189 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03925400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x02

8:29:32 μμ #19 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:29:32 μμ #20 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON

8:33:38 μμ #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

8:33:42 μμ #22 Text 0 File Mmc.cpp, Line 16452
<_NEC DVD_RW ND-2500A > start Close Session

8:34:12 μμ #23 SCSI -1135 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x05 0x61 0xDC 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

8:34:12 μμ #24 CDR -1135 File ThreadedTransferInterface.cpp, Line 1294
Write error

8:34:12 μμ #25 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1294
Could not perform Fixation

8:34:12 μμ #26 Text 0 File Mmc.cpp, Line 16452
<_NEC DVD_RW ND-2500A > start Close Session

8:34:46 μμ #27 SCSI -1135 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x05 0x61 0xDC 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

8:34:46 μμ #28 CDR -1135 File ThreadedTransferInterface.cpp, Line 1294
Write error

8:34:46 μμ #29 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1294
Could not perform Fixation

8:34:46 μμ #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 20x (3.000 KB/s)

Existing drivers:
File ‘Drivers\atapi.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 10:59:44 μμ (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Update the firmware first, I won’t say it again.
The firmware on your drive is antique…

I have a similar problem.
At first, I’ve burnt about 100 ormore of the same media.
Now, all of a sudden, it won’t burn properly any media that I previously burnt so well with.
Nec 2510a, Orig. 2.18.
I tried Nero, Toast, Mac’s built in utility. Every time, it fails at around the same spot, at approximately 58%.
Again, this started happeningshortly after I burned SuSE DL image on a Verbatim 2.4x DL.
My totallty unprofessional diagnose is that the drive is giving up the ghost.
Any thoughts?

It cannot record on an already recorded media again, unless you have RW!
Try with better media. Clean the drive.

Same errors again :frowning: It sometimes burns CDs/DVDs ok but it now started again…
Here is a more recent log :frowning:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 μμ
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e

Recorder: <_NEC DVD_RW ND-2500A> Version: 1.06 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD_RW ND-2500A >Version: 1.06 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DV-5800B atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-2500A E: CDRom0
_NEC DV-5800B I: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490996kB)
Free physical memory: 118MB (121072kB)
Memory in use : 75 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.2.2006
CD-ROM (ISO)
10:30:04 μμ #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:30:04 μμ #2 Text 0 File Burncd.cpp, Line 2948
_NEC DVD_RW ND-2500A
Buffer underrun protection activated

10:30:04 μμ #3 Text 0 File Reader.cpp, Line 127
Reader running

10:30:04 μμ #4 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-2500A running

10:30:04 μμ #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

10:30:04 μμ #6 Text 0 File Burncd.cpp, Line 3233
Turn on Track-At-Once, using CD-R/RW media

10:30:04 μμ #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 358217 ( 79:38.17)

10:30:04 μμ #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

10:30:04 μμ #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-2500A;
CDR code: 00 97 15 05; OSJ entry from: TDK Corporation
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

10:30:04 μμ #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:30:04 μμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 358218 (358218) = #358218/79:36.18
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358216 blocks [_NEC DVD_RW ND-2500A]
--------------------------------------------------------------

10:30:04 μμ #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [NEC DVD_RW ND-2500A] for write in TAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 733937664, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep
____
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
358218 | lead-out | 1 | 0x41 | 0x00

10:30:04 μμ #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 2 run-out blocks from end of track 1. Length: 358218 -> 358216.

10:30:05 μμ #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

10:30:05 μμ #15 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

10:30:05 μμ #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

10:30:05 μμ #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 20x (3.000 KB/s)

10:30:05 μμ #18 SCSI -1189 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03935200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x02

10:30:05 μμ #19 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:30:05 μμ #20 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON

10:34:16 μμ #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:34:19 μμ #22 Text 0 File Mmc.cpp, Line 16452
<_NEC DVD_RW ND-2500A > start Close Session

10:34:48 μμ #23 SCSI -1135 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x05 0x77 0x4A 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

10:34:48 μμ #24 CDR -1135 File ThreadedTransferInterface.cpp, Line 1294
Write error

10:34:48 μμ #25 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1294
Could not perform Fixation

10:34:48 μμ #26 Text 0 File Mmc.cpp, Line 16452
<_NEC DVD_RW ND-2500A > start Close Session

10:35:22 μμ #27 SCSI -1135 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x05 0x77 0x4A 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

10:35:22 μμ #28 CDR -1135 File ThreadedTransferInterface.cpp, Line 1294
Write error

10:35:22 μμ #29 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1294
Could not perform Fixation

10:35:22 μμ #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 20x (3.000 KB/s)

Existing drivers:
File ‘Drivers\atapi.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 10:59:44 μμ (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Try cleaning the lens

Try updating the firmware like you have been told a few times already.

http://support.necsam.com/oem/downloads/flashfirmware/

Well i did update the firmware… And here u go again!!::

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 μμ
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e

Recorder: <_NEC DVD_RW ND-2500A> Version: 1.0A - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD_RW ND-2500A >Version: 1.0A - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DV-5800B atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-2500A E: CDRom0
_NEC DV-5800B I: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490996kB)
Free physical memory: 125MB (128248kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.2.2006
CD-ROM (ISO)
12:57:36 μμ #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

12:57:36 μμ #2 Text 0 File Burncd.cpp, Line 2948
_NEC DVD_RW ND-2500A
Buffer underrun protection activated

12:57:36 μμ #3 Text 0 File Reader.cpp, Line 127
Reader running

12:57:36 μμ #4 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-2500A running

12:57:36 μμ #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

12:57:36 μμ #6 Text 0 File Burncd.cpp, Line 3233
Turn on Track-At-Once, using CD-R/RW media

12:57:36 μμ #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 358217 ( 79:38.17)

12:57:36 μμ #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

12:57:36 μμ #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-2500A;
CDR code: 00 97 15 05; OSJ entry from: TDK Corporation
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 0F 05 (LI 97:15.05), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

12:57:36 μμ #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:57:36 μμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 358218 (358218) = #358218/79:36.18
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358216 blocks [_NEC DVD_RW ND-2500A]
--------------------------------------------------------------

12:57:36 μμ #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [NEC DVD_RW ND-2500A] for write in TAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 733937664, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep
____
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
358218 | lead-out | 1 | 0x41 | 0x00

12:57:36 μμ #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 2 run-out blocks from end of track 1. Length: 358218 -> 358216.

12:57:36 μμ #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

12:57:36 μμ #15 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

12:57:36 μμ #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

12:57:36 μμ #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 32x (4.800 KB/s)

12:57:36 μμ #18 SCSI -1189 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03925000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x02

12:57:37 μμ #19 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:57:37 μμ #20 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON

1:00:51 μμ #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

1:00:52 μμ #22 Text 0 File Mmc.cpp, Line 16452
<_NEC DVD_RW ND-2500A > start Close Session

1:01:21 μμ #23 SCSI -1135 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x05 0x77 0x4A 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

1:01:21 μμ #24 CDR -1135 File ThreadedTransferInterface.cpp, Line 1294
Write error

1:01:21 μμ #25 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1294
Could not perform Fixation

1:01:21 μμ #26 Text 0 File Mmc.cpp, Line 16452
<_NEC DVD_RW ND-2500A > start Close Session

1:01:55 μμ #27 SCSI -1135 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x05 0x77 0x4A 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

1:01:55 μμ #28 CDR -1135 File ThreadedTransferInterface.cpp, Line 1294
Write error

1:01:55 μμ #29 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1294
Could not perform Fixation

1:01:55 μμ #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 32x (4.800 KB/s)

Existing drivers:
File ‘Drivers\atapi.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 10:59:44 μμ (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)