Nec ad-7170a dvdrw erase problem (log included)

vbimport

#1

just recently, my drive has refused to erase the same media i’ve been using for years. i have tried everything. please help!

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM
Nero version: 6.6.0.1 (Nero Express)
Recorder: <Optiarc DVD RW AD-7170A> Version: 1.02 - HA 4 TA 1 - 6.6.0.1
Adapter driver: <JRAID> HA 4
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HP DVD Writer 100j >Version: 1.42 - HA 4 TA 0 - 6.6.0.1
Adapter driver: <JRAID> HA 4

=== Scsi-Device-Map ===
DiskPeripheral : ST3250620AS atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3500630AS atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 100j 1.42 JRAID Port 4 ID 0 DMA: Off
CdRomPeripheral : Optiarc DVD RW AD-7170A 1.02 JRAID Port 4 ID 1 DMA: Off
DiskPeripheral : ST3300831A 3.01 Pnp680 Port 5 ID 0 DMA: Off
DiskPeripheral : ST380013A 3.06 Pnp680 Port 5 ID 1 DMA: Off
DiskPeripheral : WDC WD1200BB-22CAA0 16.0 Pnp680 Port 5 ID 0 DMA: Off

=== CDRom-Device-Map ===
HP DVD Writer 100j F: CDRom0
Optiarc DVD RW AD-7170A G: CDRom1

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2046MB (2095532kB)
Free physical memory: 1206MB (1235196kB)
Memory in use : 41 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.7.2008
ISO compilation
10:31:00 PM #1 Text 0 File Isodoc.cpp, Line 6165
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:31:00 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

10:31:00 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

10:31:00 PM #4 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media

10:31:00 PM #5 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 89791 ( 19:57.16, 175MB)

10:31:00 PM #6 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

10:31:00 PM #7 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: Optiarc DVD RW AD-7170A, Media type: DVD+RW
Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1

10:31:00 PM #8 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:31:00 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 89792 (89792) = #89792/19:57.17
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 89792 blocks [Optiarc DVD RW AD-7170A]
--------------------------------------------------------------

10:31:00 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [Optiarc DVD RW AD-7170A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 183894016, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
89792 | lead-out | 1 | 0x00 | 0x41

10:31:01 PM #11 Phase 24 File dlgbrnst.cpp, Line 1853
Caching of files started

10:31:01 PM #12 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.

10:31:01 PM #13 Phase 25 File dlgbrnst.cpp, Line 1853
Caching of files completed

10:31:01 PM #14 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 4x (5,540 KB/s)

10:31:01 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:31:01 PM #16 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: RICOHJPN
Media type ID: W11
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16…63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 …RICOHJPNW11.9
23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #…h.&…p.(…
6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("…

10:31:01 PM #17 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 3:27,228 (207228ms) -> OK

10:31:01 PM #18 Phase 98 File dlgbrnst.cpp, Line 1853
Start formatting disc before burning

10:31:01 PM #19 SCSI -1065 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 4, TA 1, LUN 0, buffer 0x03829000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0x04 0x11 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00

10:31:01 PM #20 Phase 101 File dlgbrnst.cpp, Line 1853
Formatting disc failed

10:31:01 PM #21 Text 0 File DVDPlusRW.cpp, Line 632
Start write address at LBA 0
DVD high compatibility mode: Yes

10:31:01 PM #22 CDR -1065 File ThreadedTransferInterface.cpp, Line 1702
Invalid command

10:31:01 PM #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
Could not perform start of Disc-at-once

10:31:01 PM #24 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

10:31:01 PM #25 Phase 38 File dlgbrnst.cpp, Line 1853
Burn process failed at 4x (5,540 KB/s)

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.28a, size=20640 bytes, created 12/5/2005 12:12:26 AM (Prassi/Veritas driver for win 2K)
File ‘Drivers\InCDfs.SYS’: Ver=5, 9, 4, 0 built by: WinDDK, size=128424 bytes, created 2/28/2008 1:03:48 PM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=5, 9, 4, 0, size=38952 bytes, created 2/28/2008 1:03:58 PM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=5, 9, 4, 0, size=17448 bytes, created 2/28/2008 1:03:58 PM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\jraid.sys’: Ver=1.16.01.00 built by: WinDDK, size=42752 bytes, created 8/23/2006 2:54:22 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#2

Many problems:

CdRomPeripheral : HP DVD Writer 100j 1.42 [B]JRAID[/B] Port 4 ID 0 DMA: Off
CdRomPeripheral : Optiarc DVD RW AD-7170A 1.02 [B]JRAID[/B] Port 4 ID 1 DMA: Off

Is RAID disabled?

Disable Multisession Mode!

Try with Imgburn, not Nero.

Remove InCD if possible too.


#3

[QUOTE=chef;2094264]Many problems:

Is RAID disabled?

Disable Multisession Mode!

Try with Imgburn, not Nero.

Remove InCD if possible too.[/QUOTE]

how can you enable RAID? i don’t remember doing anything that would alter that setting…

I will try and disable MS mode and will remove InCD. I will let you know how it goes.

Thanks for responding!


#4

Search the forum for JMicron controller, there’s a great big thread in here somewhere. Maybe something in there will help.

Edit: Here it is: http://club.cdfreaks.com/f61/jmicron-jmb363-189057/

Also, did you try with ImgBurn, as chef suggested?


#5

[QUOTE=indaskreet;2094471]how can you enable RAID? i don’t remember doing anything that would alter that setting…

I will try and disable MS mode and will remove InCD. I will let you know how it goes.

Thanks for responding![/QUOTE]

it works! i went into my BIOS and changed everything to RAID and voila! thanks so much!!!