I have been trying to update this firmware from 1.04 to 1.12 but since 1.12 does not support update from 1.04 I need to find some Intermediate firmware to make the transition.
I attempted to use command prompt with necflash.exe… First… there needs to be better instructions to this exe file.
I punched in
ecflash -flash 112_orig.bin E
but It had no idea what to do next.
I figured I had to drop the old firmware first but I can’t becaue I don’t know the exact location or the name of the firmware to drop.
I have only the Genaric Windows Firmware Last updated 2001.
It burns DVD’s fine… but it isn’t supporting Dual Layer.
First of all… Does this drive Support Dual Layer Burning(it says it does…but…)?
It reads the DL disks fine… this is the information I get from ImgBurn Software
Optiarc DVD±RW ND-3570A 104B (ATA)
Current Profile: DVD+R DL
Free Sectors: 3,970,400
Free Space: 8,131,379,200 bytes
Free Time: 882:20:50 (MM:SS:FF)
DVDÂ±R DL Boundary Information:
L0 Data Zone Capacity: 1,985,200
Physical Format Information (ADIP):
Disc ID: RITEK-S04-66
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519
Maybe this disk isn’t supported on 104B firmware?
Any Help would be appriciated.