My liteon drive is burning -r at 6x

HBK · May 16, 2017, 1:46pm

anywayz i know my theory sound stupid the thing i want to make clear is that when a drive get a buffer time their is usually a very small gap between the sectors the result will a error on the disc i know this because when i get buffer under runs o my disc it is full of errors check the bad scan at top thats an eg lately the 6.0 x burns i dont get a hint of buffer underrun even with cheap media the results are very good check out the results a top
thats s my theory

check out this +rw burn

i am not Dumbfounded

rdgrimes · February 14, 2017, 10:29am

Originally posted by rdgrimes
[B]@HBK

You’ve been asked to post a CDSpeed data disc rate test. Please do so, as it will answer any questions about actual burn speeds.

[/B]

Ssseth · February 14, 2017, 10:29am

Originally posted by rdgrimes
[B]@HBK

You’ve been asked to post a CDSpeed data disc rate test. Please do so, as it will answer any questions about actual burn speeds.
[/B]

HBK · May 16, 2017, 1:46pm

when i click on create data disc is says please in blank cd message

anywayz i feel like its only a few software burn at 6x speed nero burns at 4 x but decryptor and alochol burn at 6x and 5 x respectivly

see if this graph can help

HBK · February 14, 2017, 10:29am

Is any one else drive burning at 6 or 5 x for dvd -r and =rw
i need some explaination for this

AZImmortal · February 14, 2017, 10:29am

u don’t create a data disc, u simply place a blank dvd into the drive, make sure the correct drive is selected, and click Start.

HBK · May 16, 2017, 1:46pm

here the nero create data disc results
dvd decryptor burns my disc at 6x i wont use no more software
if u guys can find away to help other peolpe to share my bliss feel free to pm me any questions you like

hbk4life2000@hotmail.com

your eyes are not deciving you these are actuals results

Ssseth · February 14, 2017, 10:29am

Can you do us just one more favor please?

Use DVDINFOPro or DVD Identifier to post media scans.

Post the full media code and ID like this:

Media Information                            
Region information                                    N/A not a DVD-VIDEO
Media code/Manufacturer ID                                       RITEKG04
Format Capacity                                            4.37GB(4.69GB)
Free Blocks                                                             0
Book Type                                                           DVD-R
Media Type                                                          DVD-R
Media Id Code Speed                                         4.0x 5540KBps
Available Write Descriptor                           CLV  4.0x   5540KBps
Available Write Descriptor                           CLV  2.0x   2770KBps
Available Write Descriptor                           CLV  1.0x   1385KBps
Write Strategy Speed                                        4.0x 5540KBps
2x Speed OPC beta                                                      06
2x Speed OPC power                                                     0F
2x Write Strategy field 1                                     12 A8 88 80
2x Write Strategy field 2                               88 80 00 00 00 00
4x Speed OPC beta                                                      05
4x Speed OPC power                                                     1B
4x Write Strategy field 1                                     0E 10 08 09
4x Write Strategy field 2                                     97 06 0D 0B
4x Write Strategy field 3                                     00 00 00 00
4x Speed OPC beta multi-pulse                                          00
4x Speed OPC power multi-pulse                                         08
4x Write Strategy field 4                                     00 00 10 01
4x Write Strategy field 5                               1D 00 00 00 1E 04
4x Write Strategy field 6                                  00 00 00 00 1F
Data area starting sector                                          30000h
Data area end sector                                              22F60Fh
Linear Density                                                0.267um/bit
Track Density                                                0.74um/track
Number of Layers                                                        1


00000000 00 6C 00 00 01 40 C1 FD 9E D8 52 00 02 65 0E 0B .l...@....R..e..
00000010 FE FF 80 00 03 52 49 54 45 4B 47 00 04 30 34 00 .....RITEKG..04.
00000020 00 00 00 00 05 88 80 00 00 00 01 00 06 06 0F 12 ................

Thanks.

DMagic1 · February 14, 2017, 10:29am

It looks pretty legit to me. That very interesting. Would this mean that its some how possible for a regular 811 to write at 6-8x with an adjustment to the current firmwares?

HBK · February 14, 2017, 10:29am

well guys here it is hope the helps i really want to help as much as possible this forums has help me a lot this a back up of one of my game

                     dvd info scan

                Media Information

Region information N/A not a DVD-VIDEO
Media code/Manufacturer ID GSC002
Format Type UDF 1.02
Volume Name
Application id LAYSTATION
Implementation id VD-ROM GENERATOR
Recording Date/Time (mm/dd/yyyy) 12/17/2002 19:31:46
Format Capacity 4.18GB(4.49GB)
Book Type DVD-R
Media Type DVD-R
Media Id Code Speed Unknown
Available Write Descriptor CLV 4.0x 5540KBps
Available Write Descriptor CLV 2.0x 2770KBps
Write Strategy Speed 4.0x 5540KBps
2x Speed OPC beta 09
2x Speed OPC power 11
2x Write Strategy field 1 11 87 78 90
2x Write Strategy field 2 A8 82 00 20 00 00
4x Speed OPC beta 05
4x Speed OPC power 16
4x Write Strategy field 1 0D 10 0A 09
4x Write Strategy field 2 97 07 0E 0B
4x Write Strategy field 3 C0 00 00 00
4x Speed OPC beta multi-pulse 07
4x Speed OPC power multi-pulse 1C
4x Write Strategy field 4 13 A8 89 65
4x Write Strategy field 5 B6 89 88 80 00 00
4x Write Strategy field 6 00 00 D0 00 00
Data area starting sector 30000h
Data area end sector 216FFFh
Linear Density 0.267um/bit
Track Density 0.74um/track
Number of Layers 1

dvd indentifier drive capablities

** INFO : An Empty Writable Disc Is Recommended For Accurate Results
** INFO : LITE-ON DVDRW LDW-811S [FW HS0P]
** INFO : [DVD-R:GSC002]
** INFO : Write Speeds (Supported By This Drive On This Disc) Listed Below

** INFO : GET PERFORMANCE Write Speed Descriptor(s)
Descriptor #1 = 5540 KBPS (4.00x) - [CLV/Non-Pure CAV]
Descriptor #2 = 2770 KBPS (2.00x) - [CLV/Non-Pure CAV]

** INFO : MODE SENSE Write Speed Descriptor(s) [Legacy Command]
Descriptor #1 = 5540 KBPS (4.00x) - [CLV/Non-Pure CAV]
Descriptor #2 = 2770 KBPS (2.00x) - [CLV/Non-Pure CAV]

dvd inedentiyfier media code block

** INFO : Hex Dump Of ‘Media Code’-Block Listed Below
** INFO : 4-Byte Header Preceding ‘Media Code’-Block Discarded
** INFO : Format 0Eh - Pre-Recorded Information In Lead-In
0000 : 01 40 c1 fd 9e d8 52 00 02 87 0d 11 66 78 80 00 .@…R…fx…
0010 : 03 47 53 43 30 30 32 00 04 00 00 00 00 00 00 00 .GSC002…
0020 : 05 a8 82 00 20 00 02 00 06 09 11 11 87 78 90 00 … …x…
0030 : 07 a8 82 00 20 00 00 00 08 05 16 0d 10 0a 09 00 … …
0040 : 09 97 07 0e 0b 58 88 00 0a c0 00 00 00 00 10 00 …X…
0050 : 0b 07 1c 13 a8 89 65 00 0c b6 89 88 80 00 00 00 …e…
0060 : 0d 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00 …
0070 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 …
0080 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 …
0090 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 …
00a0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 …
00b0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 …
00c0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 …
00d0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 …
00e0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 …
00f0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 …

lets crack this case soon

HBK · February 14, 2017, 10:29am

hey guys i might be burning faster than 6x if u look at my nero create data disc it when to speeds up to 7.6 x but i burn somthing a while with nero it said that the remaining time was 11:42 seconds at 4 x but it finish within 7 mins take a look
the file size is 3.6 gigs

Ssseth · February 14, 2017, 10:29am

Hmmmmm… I wish my burner could burn that fast

HBK · February 14, 2017, 10:29am

hey guys i might be burning faster than 6x if u look at my nero create data disc it when to speeds up to 7.6 x but i burn somthing a while ago and nero said that the remaining time was 11:42 seconds at 4 x but it finish within 7 mins take a look
the file size is 3.6 gigs

at normal 4x the normal time is 11:42

but at 8 x it take 7 mins and couple secs like this

HBK · May 16, 2017, 1:46pm

hey guys i might be burning faster than 6x if u look at my nero create data disc it when to speeds up to 7.6 x but i burn somthing a while ago and nero said that the remaining time was 11:42 seconds at 4 x but it finish within 7 mins take a look
the file size is 3.6 gigs

at normal 4x the normal time is 11:42

but at 8 x it take 7 mins and couple secs like this

this is no +r is a +rw

HBK · February 14, 2017, 10:29am

heres the log

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.60 (1021), size=45056 bytes, created 09/09/1999 11:06:00 PM
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 06/17/2003 3:25:04 PM
Nero version: 6.0.0.15
Recorder: <LITE-ON DVDRW LDW-811S> Version: HS0P - HA 2 TA 1 - 6.0.0.15
Adapter driver: <atapi> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 3 TA 0 - 6.0.0.15
Adapter driver: <xmasscsi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : ST320410A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-48125S atapi Port 2 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LDW-811S atapi Port 2 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 3 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 st3shark Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
LITE-ON LTR-48125S D: CDRom0
LITE-ON DVDRW LDW-811S E: CDRom1
AXV CD/DVD-ROM G: CDRom3
Generic DVD-ROM H: CDRom2

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (83886080) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 383MB (392688kB)
Free physical memory: 110MB (112940kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.1.2002
Burn DVD Image
10:35:39 AM #1 Text 0 File Reader.cpp, Line 118
Reader running

10:35:39 AM #2 Text 0 File Writer.cpp, Line 127
Writer LITE-ON DVDRW LDW-811S running

10:35:39 AM #3 Text 0 File Burncd.cpp, Line 3169
Turn on Disc-at-once, using DVD media

10:35:44 AM #4 Text 0 File DlgWaitCD.cpp, Line 230
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 1842725 (409:29.50)

10:35:44 AM #5 Text 0 File DlgWaitCD.cpp, Line 235
Write in overburning mode: FALSE

10:35:44 AM #6 Text 0 File DlgWaitCD.cpp, Line 1878
Recorder: LITE-ON DVDRW LDW-811S, Media type: DVD+RW
Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1

10:35:44 AM #7 Text 0 File DlgWaitCD.cpp, Line 393
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:35:44 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 769
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1842726 (1842726) = #1842726/409:29.51
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1842726 blocks [LITE-ON DVDRW LDW-811S ]
--------------------------------------------------------------

10:35:44 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 938
Prepare recorder [LITE-ON DVDRW LDW-811S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 3774210048, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1842726 | lead-out | 1 | 0x00 | 0x41

10:35:45 AM #10 Phase 36 File dlgbrnst.cpp, Line 1843
Burn process started at 4x (5,520 KB/s)

10:35:45 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 2136
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

10:35:45 AM #12 Text 0 File Cdrdrv.cpp, Line 7909
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 01 52 49 43 4F 48 4A - 50 4E 57 31 31 01 39 23 …RICOHJPNW11.9#
00 8A 86 68 02 26 00 8A - 86 70 02 28 00 8A 86 6A …h.&…p.(…j
02 28 22 12 10 E0 00 F0 - 00 00 00 00 00 00 00 01 .("…

10:35:45 AM #13 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 11:40,109 (700109ms) -> OK

10:35:45 AM #14 Text 0 File DVDPlusRW.cpp, Line 555
Start write address at LBA 0
DVD high compatibility mode: Yes

10:43:16 AM #15 Text 0 File WriterStatus.cpp, Line 113
<LITE-ON DVDRW LDW-811S > start writing Lead-Out at LBA 1842726 (1C1E26h), lenght 0 blocks

10:43:16 AM #16 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:43:20 AM #17 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

10:43:20 AM #18 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

10:43:20 AM #19 Phase 37 File dlgbrnst.cpp, Line 1843
Burn process completed successfully at 4x (5,520 KB/s)

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.60 (1021), size=25244 bytes, created 09/09/1999 11:06:00 PM
File ‘WNASPINT.DLL’: Ver=V1.18, size=57344 bytes, created 01/26/2004 12:00:00 AM
File ‘Drivers\PXHELP20.SYS’: Ver=2.02.47a, size=17136 bytes, created 01/03/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.1185 (xpsp2.030311-1905), size=87040 bytes, created 03/13/2003 1:18:00 PM (Adapter driver for rec)
File ‘Drivers\xmasscsi.sys’: Ver=3.44.0.0 built by: WinDDK, size=5248 bytes, created 12/23/2003 2:15:42 AM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

zebra · February 14, 2017, 10:29am

All very interesting indeed.

Is there a way we can be sure that the drive is actually writing to the media @ ~6x or greater and prove that the bus is transfering data to the media this quickly?

Yes, the logs are one thing - but, actual tranfer rates reported are another (I think…)…

Does anybody have a copy of a program called BusHound? It might be of some use to us.

HBK · February 22, 2017, 2:59pm

the picture shows the actual speed which this disc is writing at it could be wrong but the time the disc takes to finish shows that it is writing at 6x

4x takes 13:57 mins to burn 4.22 gigs of data

6x as shown take 8:58 mins to burn 4.22 gigs

alcohol burns at 4.8 x

dvd drecrypter burns at 6.1x

nero burns at 7.87x

tested media so far -r +r -rw all burn at the above software speed
all with very good scan see the first page of this post

HBK · May 16, 2017, 1:46pm

look at this nero is even confused

the burn said that it take will 11:58 min to burn the dvd

at the end it took 7:59 mins to burn, it even had extra time left bad bad calculation that cant be a 4x burn rate

easy-going-man · February 14, 2017, 10:29am

At forum.rpc1.org, a guy called Pacman posted a link for a modified firmware version which permits burning at higher speeds.

I guess that you have such a modified firmware which increases speed automatically.

easy-going-man · February 14, 2017, 10:29am

http://forum.rpc-1.com/viewtopic.php?t=21593&highlight=

and here:

http://forum.rpc-1.com/viewtopic.php?t=20022&postdays=0&postorder=asc&&start=75

My liteon drive is burning -r at 6x

=== CDRom-Device-Map === LITE-ON LTR-48125S D: CDRom0 LITE-ON DVDRW LDW-811S E: CDRom1 AXV CD/DVD-ROM G: CDRom3 Generic DVD-ROM H: CDRom2

=== CDRom-Device-Map ===
LITE-ON LTR-48125S D: CDRom0
LITE-ON DVDRW LDW-811S E: CDRom1
AXV CD/DVD-ROM G: CDRom3
Generic DVD-ROM H: CDRom2