My first DL burn failed

vbimport

#1

hi all

I 've just tried to burn my first DL disc with my NEC 3500, and the procedure failed after 10 minutes… The disc was a Traxdata 2.4x and the burning was made @ this speed, while my computer was doing nothing else. Reading the log below, could someone tell me what went wrong? Was it Nero (6.6), Nec, the disc? I’d appreciate any answer, u c i’m quite frustrated, as i 've just thrown 10 euros away (1/7 of the price of nec…) and don’t wanna this happen again…

Thanx in advance

ps: my system is a P4 @ 1.9GHz, 1024 RAM @ 266

Log:

apos
edge technologies
xxxx-xxxx-xxxx-xxxx-xxxx-xxxx

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0002), size=45056 bytes, created 24/5/2004 8:42:59 πμ
ahead WinASPI: File ‘D:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.68, size=160016 bytes, created 28/7/2004 4:51:12 μμ
Nero version: 6.6.0.0
Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.18 - HA 0 TA 1 - 6.6.0.0
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SAMSUNG DVD-ROM SD-616E >Version: F505 - HA 1 TA 1 - 6.6.0.0
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : SONY CD-RW CRX230ED atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-3500AG atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD800JB-00FMA0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616E atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
SONY CD-RW CRX230ED E: CDRom0
_NEC DVD_RW ND-3500AG F: CDRom1
SAMSUNG DVD-ROM SD-616E G: CDRom2

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 597MB (611564kB)
Memory in use : 41 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

4.2.2005
DVD-Copy on the fly
1:59:34 μμ #1 Text 0 File DVDR.cpp, Line 5379
Booktype counter: 500, Booktype selected in EEPROM, command version 2

1:59:34 μμ #2 Text 0 File DVDR.cpp, Line 5379
Booktype counter: 500, Booktype selected in EEPROM, command version 2

1:59:34 μμ #3 Text 0 File Reader.cpp, Line 127
Reader running

1:59:34 μμ #4 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-3500AG running

1:59:34 μμ #5 Text 0 File DVDCopy.cpp, Line 267
DVD Track-Information from source disc
Last LBA on layer 0 = 2086911 / 0x1FD7FF / 4075MB
S01 T01 Con 0x14 Start 0 Len 3931968 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)

1:59:34 μμ #6 Text 0 File DVDCopy.cpp, Line 370
Max -1 tracks of 1 allowed to copy
1: 0 - 3931968 = 3931968, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

1:59:34 μμ #7 Text 0 File Burncd.cpp, Line 3119
Turn on Disc-at-once, using DVD media

1:59:34 μμ #8 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3931967 (873:46.17, 7679MB)

1:59:34 μμ #9 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

1:59:34 μμ #10 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD+R9 Double Layer

1:59:34 μμ #11 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

1:59:34 μμ #12 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 3931968 (3931968) = #3931968/873:46.18
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3931968 blocks [_NEC DVD_RW ND-3500AG]
--------------------------------------------------------------

1:59:34 μμ #13 Text 0 File ThreadedTransferInterface.cpp, Line 1045
Prepare recorder [_NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8052670464, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
3931968 | lead-out | 1 | 0x00 | 0x41

1:59:34 μμ #14 Phase 36 File dlgbrnst.cpp, Line 1861
Burn process started at 2.4x (3.324 KB/s)

1:59:34 μμ #15 Text 0 File ThreadedTransferInterface.cpp, Line 2471
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

2:00:14 μμ #16 Text 0 File DVDPlusDualLayer.cpp, Line 465
L0 Data Zone Capacity set to 2086912 (1FD800h, 4076MB) -> OK, confirmed setting

2:00:14 μμ #17 CDR -1205 File DVDPlusDualLayer.cpp, Line 490
Burning Layer 1

2:00:14 μμ #18 Text 0 File DVDPlusDualLayer.cpp, Line 498
Start writing layer 1 at address 0 (0h)

2:00:14 μμ #19 SCSI -1066 File Cdrdrv.cpp, Line 1175
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03599000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

2:00:14 μμ #20 Text 0 File DVDR.cpp, Line 5379
Booktype counter: 500, Booktype selected in EEPROM, command version 2

2:00:14 μμ #21 Text 0 File DVDR.cpp, Line 5379
Booktype counter: 500, Booktype selected in EEPROM, command version 2

2:00:14 μμ #22 Text 0 File DVDR.cpp, Line 5379
Booktype counter: 500, Booktype selected in EEPROM, command version 2

2:00:14 μμ #23 Text 0 File DVDR.cpp, Line 4674
Drive: _NEC DVD_RW ND-3500AG
Booktype request: DVD-ROM, write to RAM
select Booktype setting from RAM

2:00:14 μμ #24 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 40:16,398 (2416398ms) -> OK

2:00:14 μμ #25 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes

2:11:39 μμ #26 SCSI -1093 File Cdrdrv.cpp, Line 1429
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03A70000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x10 0xAB 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0x00

2:11:39 μμ #27 CDR -1093 File Writer.cpp, Line 311
No seek complete

2:11:39 μμ #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

2:11:39 μμ #29 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

2:11:39 μμ #30 SCSI -1135 File Cdrdrv.cpp, Line 1175
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

2:11:39 μμ #31 SCSI -1176 File Cdrdrv.cpp, Line 1175
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x03

2:11:39 μμ #32 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:00,000 (0ms) -> OK

2:11:39 μμ #33 Text 0 File DVDR.cpp, Line 5379
Booktype counter: 500, Booktype selected in RAM, command version 2

2:11:39 μμ #34 Text 0 File DVDR.cpp, Line 5379
Booktype counter: 500, Booktype selected in RAM, command version 2

2:11:39 μμ #35 Text 0 File DVDR.cpp, Line 4674
Drive: _NEC DVD_RW ND-3500AG
Booktype request: DVD-ROM, write to RAM
select Booktype setting from RAM

2:11:39 μμ #36 CDR -1135 File WriterStatus.cpp, Line 171
Write error
_NEC DVD_RW ND-3500AG\H0 T1

2:11:39 μμ #37 TRANSFER -24 File WriterStatus.cpp, Line 171
Could not perform end of Disc-at-once

2:11:39 μμ #38 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:00,000 (0ms) -> OK

2:11:39 μμ #39 Phase 38 File dlgbrnst.cpp, Line 1861
Burn process failed at 2.4x (3.324 KB/s)

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 24/5/2004 8:42:53 πμ
File ‘Drivers\PXHELP20.SYS’: Ver=2.02.62a, size=20016 bytes, created 28/10/2003 12:02:00 μμ (Prassi/Veritas driver for win 2K)
File ‘Drivers\InCDfs.SYS’: Ver=?.?.?.?, size=85360 bytes, created 23/5/2003 3:51:42 μμ (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=4.00, size=26784 bytes, created 21/5/2003 7:26:58 μμ (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=4.00, size=4976 bytes, created 23/5/2003 3:52:30 μμ (InCD4 driver for win NT/2K/XP)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 3/9/2002 1:15:26 πμ (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#2

@ apos
Since no-one has answered you, I’ll throw in my 2 cents…tho I am no zen-master at nero error logs. At least I will bump this and maybe a nero tech will see this and swoop in and give us his opinion. I would also be interested in their response.
A couple things I see that could be a problem…

Nero version: 6.6.0.0

“You may want to upgrade to the latest version” …that is the standard company line, but it often works :iagree:

DVD-Copy on the fly
1:59:34 μμ #1 Text 0 File DVDR.cpp, Line 5379
Booktype counter: 500, Booktype selected in EEPROM, command version 2

Are you trying to copy on-the-fly? IMHO, that would certainly be risky. I would try my first DL burn by putting an image on the HDD first, then burning from that…less chance of an error and easier to trouble shoot a problem.

1:59:34 μμ #10 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD+R9 Double Layer

Another thing, your blank DL disc is never identified by MID(I think it’s a ‘RITEKD01’), but it is recognized as a DL disc. This is where it usually gives the disc specs. You do have the latest official firmware(good), but I don’t know what the date on it is, or if it supports this MID specifically or just with a generic strat.

2:00:14 μμ #23 Text 0 File DVDR.cpp, Line 4674
Drive: _NEC DVD_RW ND-3500AG
Booktype request: DVD-ROM, write to RAM
select Booktype setting from RAM

What’s this? Are you trying to set booktype? I would turn off that feature during DL burns…it may have been what confused nero.

2:00:14 μμ #19 SCSI -1066 File Cdrdrv.cpp, Line 1175
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03599000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
This is your first error and all following errors are the result of this. The code is for “INVALID FIELD IN CDB” …you have your ‘CDB Data’ line in the error quoted above, but I am not sure what it means other than it looks like the burner or nero didn’t like your disc.

By the way…some potentially good news :slight_smile: … it looks as if the error happened before any burning took place, therefore, this disc may still be considered blank and reuseable…hope this helps…

EDIT: further research shows your firmware DOES support these RITEKD01 discs, but for some reason they were not listed in the nero report. And official NEC firmware 2.18 DOES support bitsetting for +R DL discs:).


#3

thanx a lot, really!


#4

apos, from what I’ve read, Verbatim DL discs are you best choice. The NEC-3500 will burn them at 4x.

DRF


#5

yeah, i know, but also are 50% more expensive! :slight_smile: of course, if the media was the problem, i’ll try something better like the verbatim, but this is what i want to find out, IS it the media, or I did something wrong?

@ please: the burning process had unfortunately started, so the disc is useless…

Thank u both anyway!


#6

@ apos
you might try returning the disc(to the vendor or fire off a email to the manufacturer)and maybe they’ll replace it or get your money back