My first crc error with bluray, should I be worried?

vbimport

#1

I’ve never had them with a benq burner and LTH discs, and not with the HTL discs I got from ebay, but after about 5 burns with these:

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItemVersion&item=182130079034&view=all&tid=1509578971008

I actually got a crc error:



9043-0082-W23E-2PPH-0LKT-TMMP-****-****
X017-206A-9865-700U-9ZU2-0XE3-****-****

Windows 7 6.1
AMD64
Wow64Process
Nero Version: 15.0.25.0
Internal Version: 15,0,25,0

Recorder         : <HL-DT-ST BD-RE  BH14NS40>     FW version: 1.00 - HA 1 TA 0 - 15.0.25.0
 Device bus      :  <>                            HA 1
 Host system bus :  <IDE> 
 Drive buffer    :  4064kB
 Bus Type        :  via Inquiry data
CD/DVD-ROM       : <HL-DT-ST BD-RE  BH14NS40 >    FW version: 1.00 - HA 1 TA 0 - 15.0.25.0
 Device bus      :  <>                            HA 1
 Host system bus :  <IDE> 

=== Scsi-Device-Map ===
                     :         ST3000DM001-1CH1CC27  asstor64 Port 6 ID 8  DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST BD-RE  BH14NS40   F:   CdRom0
ATAPI iHAS124   B          I:   CdRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 4095MB (4194303kB)
Free physical memory: 4095MB (4194303kB)
Memory in use       : 30 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0) 

28.6.2016
UDF compilation
18:24:25	#1 Text 0 File SCSIPTICommands.cpp, Line 617
	LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
18:24:25	#2 Text 0 File Isodoc.cpp, Line 7629
	UDF document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	UDF Mode                : pure
	UDF Options             : automatic
	UDF Revision            : 1.02
	UDF Partition Type      : physical
	
18:24:25	#3 PHASE 214 File dlgbrnst.cpp, Line 2066
	Generation of disc structures started
	
18:24:25	#4 Text 0 File compose.cpp, Line 970
	GenUDF2: 1 transfer items prepared.
	
18:24:25	#5 PHASE 215 File dlgbrnst.cpp, Line 2066
	Generation of disc structures completed
	
18:24:25	#6 Text 0 File Burncd.cpp, Line 3647
	Turn on Disc-At-Once, using CD-R/RW, DVD R/RW, DVD DL, DVD-RAM, BD-R/RE, BD DL, BDXL media
	
18:24:25	#7 Text 0 File DlgWaitCD.cpp, Line 334
	[F: BD-RE  BH14NS40 ] Total disc capacity:     12219392    23866MB
	User data to be written: 11846944    23138MB
	Free space on disc:		 12219392    23866MB
	
18:24:25	#8 Text 0 File DlgWaitCD.cpp, Line 346
	[F: BD-RE  BH14NS40 ] Write in overburning mode: NO (enabled: CD)
	
18:24:25	#9 Text 0 File DlgWaitCD.cpp, Line 3034
	Recorder: HL-DT-ST BD-RE  BH14NS40, Media type: BD-R (seq)
	
18:24:25	#10 Text 0 File DlgWaitCD.cpp, Line 537
	[F: BD-RE  BH14NS40 ] >>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
18:24:25	#11 Text 0 File ThreadedTransferInterface.cpp, Line 879
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 11846944 (11846944) = #11846944/2632:39.19
	    relocatable, disc pos for caching/writing not required/ required
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 11846944 blocks [F: HL-DT-ST BD-RE  BH14NS40]
	--------------------------------------------------------------
	
18:24:25	#12 Text 0 File ThreadedTransferInterface.cpp, Line 1095
	Prepare [F: HL-DT-ST BD-RE  BH14NS40] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0   24262541312, ISRC ""
	DAO layout:
	===========
	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
	        0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   1 |    0x41 | 11846944 |        0 | 0x00
	 11846944 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
	MediaType: BD-R
	
18:24:25	#13 Text 0 File SCSIPTICommands.cpp, Line 404
	SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
	
18:24:25	#14 Text 0 File Burncd.cpp, Line 4517
	Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
	
18:24:25	#15 PHASE 24 File dlgbrnst.cpp, Line 2066
	Caching of files started
	
18:24:31	#16 Text 0 File Burncd.cpp, Line 4639
	Cache writing successful.
	
18:24:31	#17 PHASE 25 File dlgbrnst.cpp, Line 2066
	Caching of files completed
	
18:24:31	#18 PHASE 36 File dlgbrnst.cpp, Line 2066
	Burn process started at 4x (17,980 KB/s)
	
18:24:31	#19 Text 0 File ThreadedTransferInterface.cpp, Line 2926
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
18:24:31	#20 Text 0 File Cdrdrv.cpp, Line 10814
	---- Disc Structure (BD): Disc Information on BD (00h) ----
	Media Type: 1, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 4098
	 --- Header ---
	  Disc Information Identifier: <DI>
	  Disc Information Format: 01 h
	  Number of DI Units/Aux Frames in each DI block: 5
	  Number of (recording) layer to which this DI Unit applies: 0
	  DI unit Sequence Number in DI Block: 0
	  Continuation flag: Next DI Unit is the start of a new set of parameters (0)
	  Number of DI bytes in use in this DI unit: 98
	 --- Body ---
	  Disc Type Identifier: <BDR>
	  Disc Size/Class/Version: 1
	  DI Unit Format dependent contents:
	   BD Structure: 18 (12 h):
	    1 recording layer (SL), BD-R
	   Hybrid Disc identifier/Channel bit length: 1 (1 h):
	    no DVD layer present, no CD layer present
	    channel bit length of 74,5 nm (25.0 GB max. per layer)
	   Push-Pull polarity flag bits: 00 h
	   Recorded mark polarity flag bits: 00 h
	   BCA descriptor: BCA-code present (1)
	   Maximum transfer rate needed by the application: 0 Mbit/s
	   Data zone allocation:
	    First Physical ADIP Address of the Data Zone of the related layer (FAA): 00020000 h (131072)
	    Last Physical ADIP Address of the Data Zone of the related layer (LAA):  00194E7E h (1658494)
	   Recording velocities:
	    Nominal Recording Velocity: 4.92 m/s (1EC h)
	    Maximum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1
	    Minimum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1
	   ...
	   12 01 00 00 01 00 00 00 - 00 00 00 00 00 02 00 00
	   00 19 4E 7E 01 EC 64 64 - 28 28 28 28 1E 1E 1E 1E
	   00 00 00 00 5F 73 64 04 - 04 45 1D 86 B0 F0 F0 F0
	   F0 00 00 00 00 00 00 00 - 00 50 00 50 00 50 00 50
	   00 58 00 58 00 58 00 58 - 00 60 00 60 00 60 00 60
	   00 90 A0 C0 C8 C8 00 00
	 --- Trailer ---
	  Disc Manufacturer ID: 43 4D 43 4D 41 47 h <CMCMAG>
	  Media Type ID: 42 41 35 <BA5>
	  Time Stamp [m:y]: 0 : 0000 (00 00 h)
	  Product Revision Number: 0
	
18:24:31	#21 SPTI -1066 File SCSIPassThrough.cpp, Line 225
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
	CDB Data:   0xAC 00 00 00 00 00 00 00 00 64 00 00 
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x24
	Sense Qual: 0x00
	Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 
	Buffer x08936ac0: Len x648
	
18:24:31	#22 Text 0 File BD.cpp, Line 416
	Allocated spare area size on disc 620000h
	BD: Start write address at LBA 0, Recording mode: unknown Recording Mode (0),
	    spare area allocation: default (no action) (0), Stream recording: NO (0); return code 0
	
18:24:31	#23 Text 0 File ThreadedTransfer.cpp, Line 275
	Pipe memory size 83836800
	
18:24:31	#24 Text 0 File CUDFTransferItem2.cpp, Line 713
	 
	GenUDF2 FS Layout:
	=-=-=-=-=-=-=-=-=-=-
	    Sectors to be written: 11846944
	            Session Start: Sector 0
	         Volume Structure: Sector [0, 256] (257 Sectors)
	                Meta Data: Sector [257, 346] (90 Sectors)
	                     Data: Sector [347, 11846607] (11846261 Sectors)
	               After Data: Sector [11846608, 11846623] (16 Sectors)
	            Trailer Track: Sector [11846624, 11846943] (320 Sectors)
	 
	GenUDF2 Parameters:
	=-=-=-=-=-=-=-=-=-=-
	                 PrepTime: 06-28-2016 18:24:25
	             UDF Revision: 1.02
	       UDF Partition Type: Physical
	         UDF Special Mode: None
	         Bytes per Sector: 2048
	            Session Start: 0
	 Physical Partition Start: -1
	           Total Capacity: 12219392
	       Multi Session Mode: None
	                Disc Type: BD-R
	                 OS Class: 0
	                Volume ID: New
	     Allow Unicode Labels: 0
	      Duplicate Meta Data: 1
	             MS Info File: 00000000
	        VMS Rollback File: 00000000
	        Create ISO bridge: 0
	         ECC Block Length: 32
	    Sparing Packet Length: 32
	     Allocation Unit Size: 32
	      Alignment Unit Size: 32
	            Make Writable: 0
	              Access Type: Read-only
	
18:45:59	#25 WINPFILE 23 File winpfile.cpp, Line 349
	Data error (cyclic redundancy check).

	H:\_burn\Unfriended 2014 1080p BRRip x264 DTS-JYK\Unfriended 2014 1080p BRRip x264 DTS-JYK.mkv
	
18:49:31	#26 WINPFILE 23 File winpfile.cpp, Line 349
	Data error (cyclic redundancy check).

	H:\_burn\Unfriended 2014 1080p BRRip x264 DTS-JYK\Unfriended 2014 1080p BRRip x264 DTS-JYK.mkv
	
18:49:55	#27 Text 0 File WriterStatus.cpp, Line 245
	<F: HL-DT-ST BD-RE  BH14NS40> start writing Lead-Out at LBA 11846944 (B4C520h), length 0 blocks
	
18:50:12	#28 Text 0 File DVDPlusDualLayer.cpp, Line 1464
	SetDriveCaps: Set LAST LBA of layer 1 to 0
	
18:50:12	#29 PHASE 161 File dlgbrnst.cpp, Line 2066
	Burn process completed successfully with warnings
	
18:50:12	#30 Text 0 File SCSIPTICommands.cpp, Line 454
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
18:50:12	#31 Text 0 File Cdrdrv.cpp, Line 12266
	DriveLocker: UnLockVolume completed
	
18:50:12	#32 Text 0 File SCSIPTICommands.cpp, Line 617
	UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	

Maybe the file that I tried to burn was incomplete? But I was able to watch it just fine. It was a full disc, but I’ve heard that you only have to worry about errors when filling up the disc when you’re using LTH media.

The discs say “bd-r for video” - maybe that’s the problem?


#2

The error has nothing to do with BluRay discs.
Damaged data is read \ write …



#3

Yeah…
If you’re using material found on the internet, we can’t help.
If you have the original disc, you’ll have to re-rip & try again.