My dvd writer GH22NP20 reads cd,dvd writes cd but not dvd

vbimport

#1

hi friends…
i friends am new to this forum… i would like to share my problem with u all…
I am having this dvd writer GH22NP20 which i bought 1 month before… i have hardly burned 2 to 3 dvd’s.But since some days my drive is driving me nuts.I can read cd,dvd & also write a cd…but i cant write a dvd.I am using nero for burning…whenever i start burning it abruptly gives an error in between saying “write error” & eventually the writing fails…i have wasted 5 dvd’s like this…also dvd rw’s wont erase & burn properly …can somebody pls tell me what’s exactly causing this…i have reinstalled the drivers but invain…
pls guys reply me at the earliest…


#2

Welcome to the forum :slight_smile:

Try another DVD burn in Nero, and if it fails, it should ask if you want to save an error log.

Save the log, and post it here so we can see what’s happening :slight_smile:


#3

i also using tis model, so far had burn 6pcs dvdr & 2pcs cdr w/o problem, hope u can solve ur problem asap.


#4

[QUOTE=Arachne;2127554]Welcome to the forum :slight_smile:

Try another DVD burn in Nero, and if it fails, it should ask if you want to save an error log.

Save the log, and post it here so we can see what’s happening :)[/QUOTE]

I am in the SAME BOAT! MY LG GH22NP20 does NOT WRITE DVD.

I am ANNOYED - on where I am wrong. I have about 5 DVDs wasted. Below is the LOG file. Kindly advise remedy. Thanks in advance.

raja
home
4C85-200E-4005-0004-0000-7660-0800-35X3-0000-407M-MX37-**** (*)

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.11.3.0
Internal Version: 7, 11, 3, 0
(Nero Express)
Recorder: <hl-dt-st dvd-ram="" gh22np20="">Version: 1.03 - HA 1 TA 0 - 7.11.3.0
Adapter driver: <ide> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <hl-dt-st dvd-ram="" gh22np20="">Version: 1.03 - HA 1 TA 0 - 7.11.3.0
Adapter driver: <ide> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3160215AS atapi Port 3 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RAM GH22NP20 atapi Port 4 ID 0 DMA: Off
CdRomPeripheral : SAMSUNG CD-R/RW SW-252B atapi Port 4 ID 1 DMA: On
DiskPeripheral : SAMSUNG SV4002H atapi Port 5 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVD-RAM GH22NP20 I: CdRom0
SAMSUNG CD-R/RW SW-252B H: CdRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1470MB (1505772kB)
Free physical memory: 841MB (862128kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.9.2009
ISO compilation
14:15:47 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

14:15:47 #2 Text 0 File Isodoc.cpp, Line 6671
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

14:15:50 #3 ISO9660GEN -11 File Geniso.cpp, Line 3350
First writeable address = 0 (0x00000000)

14:15:52 #4 Text 0 File Burncd.cpp, Line 3500
Turn on Disc-At-Once, using DVD media

14:16:38 #5 ISO9660GEN -11 File Geniso.cpp, Line 3350
First writeable address = 0 (0x00000000)

14:16:40 #6 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD’
ParamMode = ‘automatic’, changing UDF partition type from ‘physical’ to 'physical’
Changing UDF revision from ‘1.02’ to ‘1.02’

14:16:40 #7 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 1774847 (394:24.47, 3466MB)

14:16:40 #8 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

14:16:40 #9 Text 0 File DlgWaitCD.cpp, Line 2988
Recorder: HL-DT-ST DVD-RAM GH22NP20, Media type: DVD-R
Disc Manufacturer ID: <mbi 01=""> <rg40>
Disc Application Code: 64, Disc Physical Code: 193

14:16:40 #10 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD DL, DVD-RAM.)

14:16:40 #11 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1774848 (1774848) = #1774848/394:24.48
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1774848 blocks [I: HL-DT-ST DVD-RAM GH22NP20]
--------------------------------------------------------------

14:16:51 #12 Text 0 File ThreadedTransferInterface.cpp, Line 986
Prepare [I: HL-DT-ST DVD-RAM GH22NP20] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3634888704, ISRC ""
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1774848 | 0 | 0x00
1774848 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

14:16:51 #13 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

14:16:51 #14 Text 0 File Burncd.cpp, Line 4286
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

14:16:51 #15 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

14:16:51 #16 Text 0 File Burncd.cpp, Line 4405
Cache writing successful.

14:16:51 #17 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

14:16:51 #18 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 8x (11,080 KB/s)

14:16:52 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2733
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

14:16:52 #20 Text 0 File DVDR.cpp, Line 3262
Recording mode: Sequential Recording Mode

14:16:52 #21 Text 0 File DVDR.cpp, Line 3416
Start write address at LBA 0
DVD high compatibility mode: Yes

14:16:52 #22 SPTI -1066 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x08d02880: Len x648

14:16:52 #23 Text 0 File Cdrdrv.cpp, Line 10161
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified=""> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 26127F h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0, Extended part version: 33
Start PSN of the Extra Border Zone: 2FE10 h
Start PSN of Physical format information blocks in Extra Border Zone: 2FFA0 h
Media Specific [16…783]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`…0@P…!..
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
01 40 C1 FD 9E D8 52 00 - 02 85 0D 10 88 9A 80 00 .@…R…
03 4D 42 49 20 30 31 00 - 04 52 47 34 30 00 00 00 .MBI.01…RG40…
05 88 80 00 00 00 02 00 - 06 09 0D 13 87 78 80 00 …x…
07 88 80 00 00 00 00 00 - 08 05 15 0D 10 0B 0A 00 …
09 98 08 0F 0B 78 88 00 - 0A 80 00 00 00 00 10 00 …x…
0B 07 19 15 A7 88 75 00 - 0C 99 BC AA A2 20 22 00 …u…".
0D 00 00 D0 00 00 00 00 - 0E 09 25 33 2F 29 1E 00 …%3/)…
0F 50 21 2D 1F 9A B6 00 - 10 88 84 00 04 00 04 00 .P!-…
11 00 00 00 00 00 00 00 - 12 09 2F 37 2F 29 1E 00 …/7/)…
13 50 1F 2D 1F 9A B6 00 - 14 88 C4 00 04 00 04 00 .P.-…
15 00 00 00 00 00 00 00 - 16 0B 3F 33 2F 29 1E 00 …?3/)…
17 50 21 2D 1F 9A B6 00 - 18 88 84 00 04 00 04 00 .P!-…
19 00 00 00 00 00 00 00 - 1A 0B 51 37 2F 29 1E 00 …Q7/)…
1B 50 1F 2D 1F 9A B6 00 - 1C 88 C4 00 04 00 04 00 .P.-…
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

14:16:52 #24 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800

14:26:51 #25 SPTI -600 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x09de0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

14:26:51 #26 CDR -600 File Writer.cpp, Line 306
Device not available
I: HL-DT-ST DVD-RAM GH22NP20

14:46:51 #27 Text 0 File DVDR.cpp, Line 3818
EndDAO: Last written address was -1 (FFFFFFFFh)

14:46:51 #28 CDR -1114 File WriterStatus.cpp, Line 287
Reset occurred
I: HL-DT-ST DVD-RAM GH22NP20

14:46:51 #29 TRANSFER -24 File WriterStatus.cpp, Line 287
Could not perform end of Disc-at-once

14:46:51 #30 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 8x (11,080 KB/s)

14:46:52 #31 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

14:46:53 #32 Text 0 File Cdrdrv.cpp, Line 11412
DriveLocker: UnLockVolume completed

14:46:53 #33 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)</not></rg40></mbi></ide></hl-dt-st></ide></hl-dt-st>


#5

The used media is known to be problematic.

Most important:

CdRomPeripheral : HL-DT-ST DVD-RAM GH22NP20 atapi Port 4 ID 0 [B]DMA: Off[/B]

Turn it on.

Also disable Multisession Mode!


#6

THANKS.
How do i turn DMA On? Perhaps in settings? I shall try.
The Media is Bad? How does one ensure that the MEDIA one buys from the stationery shops are good and trustworthy? Or simply genuine?