My bro's laptop burner burns better than my 112d

vbimport

#1

Lately I’ve been running in to problems when burning dvds. Some dvds work, others just won’t read after a while. The dvd’s don’t have scratches on them. I’ve updated my burner to 1.24 firmware (so its recent). I don’t need the benefits of converting my drive to 112L so 1.24 is sufficient for me. I did improve the bitsetting a little (note that I’m no pro at this as well).

Basically, my brother’s computer can always burn what my burner can’t. I don’t know what’s the problem here… If its b/c of the burner, the firmware, or my computer (hard-drive, etc…) and I need to find out. I did a fair amount of research before deciding on the 112d and I’m not about to settle with all these errors.
When I do a surface scan using Nero’s “Cd-DVD speed” I get this error: DVD Drive L-EC Uncorrectable Error

Also I’ve copied and pasted the log for the error (when I try to burn the disk) below:

.
.

1A20-*edit*
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=0.29.4.10, size=32768 bytes, created 1/13/2008 10:30:00 AM 
ahead WinASPI: File 'C:\Program Files\Ahead
ero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 4:33:44 PM 
Nero version: 6.3.1.26 (Nero Express)
Recorder:             <PIONEER DVD-RW  DVR-112D>Version: 1.24 - HA 2 TA 0 - 6.3.1.26
 Adapter driver:      <atapi>                   HA 2
 Drive buffer  :      2000kB
 Bus Type      :      via Inquiry data (1) -> ATAPI, detected: ATAPI 
 Connected to MMC as unknown drive with class-nr : 1
 Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM:               <PIONEER  DVD-RW  DVR-112D>Version: 1.24 - HA 2 TA 0 - 6.3.1.26
 Adapter driver:      <atapi>                   HA 2

=== Scsi-Device-Map ===
DiskPeripheral       : ST3320620AS                      atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : PIONEER DVD-RW  DVR-112D         atapi Port 2 ID 0  DMA: On 
DiskPeripheral       : Maxtor 2F020J0                   atapi Port 3 ID 0  DMA: On 

=== CDRom-Device-Map ===
PIONEER DVD-RW  DVR-112D   D:   CDRom0
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 1023MB (1047792kB)
Free physical memory: 643MB (658716kB)
Memory in use       : 37 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

18.2.2008
===== Disc-Copy over image - 1st step : Copy to image  ...

12:31:31 AM	#1 Text 0 File Reader.cpp, Line 126
	Reader running
	
12:31:31 AM	#2 Text 0 File Writer.cpp, Line 124
	Writer  Image Recorder      running
	
12:31:31 AM	#3 Text 0 File DVDCopy.cpp, Line 271
	DVD Track-Information from source disc
	 S01 T01 Con 0x14 Start       0 Len 1962048 (gap       0) Blank 0 Res -1 Dmg 0 Mode TRM_DATA_MODE1 (0)
	
12:31:31 AM	#4 Text 0 File DVDCopy.cpp, Line 374
	Max -1 tracks of 1 allowed to copy
	 1:        0 -  1962048 =  1962048, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
	
12:31:31 AM	#5 Text 0 File Burncd.cpp, Line 3152
	Turn on Disc-at-once, using DVD media
	
12:31:32 AM	#6 Text 0 File DlgWaitCD.cpp, Line 247
	Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
	Last address to be written:            1962047 (436:00.47, 3832MB)
	
12:31:32 AM	#7 Text 0 File DlgWaitCD.cpp, Line 259
	Write in overburning mode: NO (enabled: CD)
	
12:31:32 AM	#8 Text 0 File DlgWaitCD.cpp, Line 2162
	Recorder:  Image Recorder;
	   CD type reading failed
	   ATIP Data: ?
	
12:31:32 AM	#9 Text 0 File DlgWaitCD.cpp, Line 420
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
12:31:32 AM	#10 Text 0 File ThreadedTransferInterface.cpp, Line 813
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (1 - Data (mode 1))
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 1962048 (1962048) = #1962048/436:0.48
	    not relocatable, disc pos for caching/writing not required/not required, no patch infos 
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1962048 blocks [ Image Recorder     ]
	--------------------------------------------------------------
	
12:31:32 AM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 984
	Prepare recorder [ Image Recorder     ] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x40; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0        307200    4018581504, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
	    -150 |  lead-in |   0 |   0x00 |  0x41
	    -150 |        1 |   0 |   0x00 |  0x41
	       0 |        1 |   1 |   0x00 |  0x41
	 1962048 | lead-out |   1 |   0x00 |  0x41
	
12:31:32 AM	#12 Phase 120 File dlgbrnst.cpp, Line 1855
	Creating the image for burning
	
12:31:32 AM	#13 Text 0 File ThreadedTransferInterface.cpp, Line 2344
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
12:35:00 AM	#14 SCSI -1128 File Cdrdrv.cpp, Line 1445
	SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x05E81000
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x05
	CDB Data:   0x28 0x00 0x00 0x0E 0x0C 0xE0 0x00 0x00 0x20 0x00 0x00 0x00 
	Sense Data: 0xF0 0x00 0x03 0x00 0x0E 0x0C 0xE0 0x0E 
	            0x00 0x00 0x00 0x00 0x11 0x05 
	
12:35:08 AM	#15 SCSI -1128 File Cdrdrv.cpp, Line 1445
	SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x05E81000
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x05
	CDB Data:   0x28 0x00 0x00 0x0E 0x0C 0xE0 0x00 0x00 0x20 0x00 0x00 0x00 
	Sense Data: 0xF0 0x00 0x03 0x00 0x0E 0x0C 0xE0 0x0E 
	            0x00 0x00 0x00 0x00 0x11 0x05 
	
12:35:08 AM	#16 TRANSFER -25 File Reader.cpp, Line 379
	Error reading data
	
12:35:08 AM	#17 Text 0 File ThreadedTransfer.cpp, Line 229
	all writers idle, stopping conversion
	
12:35:12 AM	#18 Phase 22 File dlgbrnst.cpp, Line 1855
	Reading disc failed
	


===== Disc-Copy over image - 2nd step : Burn the image ...

12:31:31 AM	#1 Text 0 File Reader.cpp, Line 126
	Reader running
	
12:31:31 AM	#2 Text 0 File Writer.cpp, Line 124
	Writer  Image Recorder      running
	
12:31:31 AM	#3 Text 0 File DVDCopy.cpp, Line 271
	DVD Track-Information from source disc
	 S01 T01 Con 0x14 Start       0 Len 1962048 (gap       0) Blank 0 Res -1 Dmg 0 Mode TRM_DATA_MODE1 (0)
	
12:31:31 AM	#4 Text 0 File DVDCopy.cpp, Line 374
	Max -1 tracks of 1 allowed to copy
	 1:        0 -  1962048 =  1962048, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
	
12:31:31 AM	#5 Text 0 File Burncd.cpp, Line 3152
	Turn on Disc-at-once, using DVD media
	
12:31:32 AM	#6 Text 0 File DlgWaitCD.cpp, Line 247
	Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
	Last address to be written:            1962047 (436:00.47, 3832MB)
	
12:31:32 AM	#7 Text 0 File DlgWaitCD.cpp, Line 259
	Write in overburning mode: NO (enabled: CD)
	
12:31:32 AM	#8 Text 0 File DlgWaitCD.cpp, Line 2162
	Recorder:  Image Recorder;
	   CD type reading failed
	   ATIP Data: ?
	
12:31:32 AM	#9 Text 0 File DlgWaitCD.cpp, Line 420
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
12:31:32 AM	#10 Text 0 File ThreadedTransferInterface.cpp, Line 813
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (1 - Data (mode 1))
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 1962048 (1962048) = #1962048/436:0.48
	    not relocatable, disc pos for caching/writing not required/not required, no patch infos 
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1962048 blocks [ Image Recorder     ]
	--------------------------------------------------------------
	
12:31:32 AM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 984
	Prepare recorder [ Image Recorder     ] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x40; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0        307200    4018581504, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
	    -150 |  lead-in |   0 |   0x00 |  0x41
	    -150 |        1 |   0 |   0x00 |  0x41
	       0 |        1 |   1 |   0x00 |  0x41
	 1962048 | lead-out |   1 |   0x00 |  0x41
	
12:31:32 AM	#12 Phase 120 File dlgbrnst.cpp, Line 1855
	Creating the image for burning
	
12:31:32 AM	#13 Text 0 File ThreadedTransferInterface.cpp, Line 2344
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
12:35:00 AM	#14 SCSI -1128 File Cdrdrv.cpp, Line 1445
	SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x05E81000
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x05
	CDB Data:   0x28 0x00 0x00 0x0E 0x0C 0xE0 0x00 0x00 0x20 0x00 0x00 0x00 
	Sense Data: 0xF0 0x00 0x03 0x00 0x0E 0x0C 0xE0 0x0E 
	            0x00 0x00 0x00 0x00 0x11 0x05 
	
12:35:08 AM	#15 SCSI -1128 File Cdrdrv.cpp, Line 1445
	SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x05E81000
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x11
	Sense Qual: 0x05
	CDB Data:   0x28 0x00 0x00 0x0E 0x0C 0xE0 0x00 0x00 0x20 0x00 0x00 0x00 
	Sense Data: 0xF0 0x00 0x03 0x00 0x0E 0x0C 0xE0 0x0E 
	            0x00 0x00 0x00 0x00 0x11 0x05 
	
12:35:08 AM	#16 TRANSFER -25 File Reader.cpp, Line 379
	Error reading data
	
12:35:08 AM	#17 Text 0 File ThreadedTransfer.cpp, Line 229
	all writers idle, stopping conversion
	
12:35:12 AM	#18 Phase 22 File dlgbrnst.cpp, Line 1855
	Reading disc failed
	

Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 7/9/2007 2:07:48 PM 
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 11:06:00 AM 
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 3/7/2007 6:51:00 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

#2

What exact media were used?


#3

the original dvd:
DVD+R, YUDEN000 T02 (sorry… i looked at the top of the dvd. doesn’t say what media but I know it’s brand name. Cuz we don’t buy those no-brand name ones). It’s like olive green on top, not sure if that helps.

the dvd I want to burn to: Memorex, DVD+R


#4

Memorex dvd media should be avoided due to bad quality mostly.

Genuine Verbatim & TY is your best choice.


#5

I know… but verb’s weren’t on sale and I was desperate for some dvds. but the thing is, the error pops up in the 1st stage…the reading stage. So it’s irrelevant to what media i’m using.


#6

@ deepsplash,

Then you have a problem with the Media Disk you are attempting to “Read”.

Regards,
bjkg


#7

That was deep. you’re my hero bjkg. try to read your disk on another drive and make an iso or some kind’a image then burn it on your 112D. Memorex ----> ritekf1’s aren’t the worse media ever. there was a spike or two, but all in all decent burns (um i think i tripped on the computer). I check my disks some are physically wrong. you can see it :confused: at 11$ for 50 one can afford to chuck the crap or burn some random friend a movie.


#8

[QUOTE=Matthew12222;2002918]That was deep. you’re my hero bjkg. try to read your disk on another drive and make an iso or some kind’a image then burn it on your 112D. Memorex ----> ritekf1’s aren’t the worse media ever. there was a spike or two, but all in all decent burns (um i think i tripped on the computer). I check my disks some are physically wrong. you can see it :confused: at 11$ for 50 one can afford to chuck the crap or burn some random friend a movie.[/QUOTE]

I’m not sure if I understand the purpose behind this. What you’re saying is for me to go to bro’s laptop and make an image of the original disk. Then get that image on my computer and try to burn it?
If I did that, would it tell me what exactly the problem is (my burner is messed up or burner lens needs cleaning, my computer’s hard drive or ram,etc…) ? allowing me the chance to fix it. What i’m trying to do is find out the problem and fix it. We’ve already got a copy of this dvd (using my bro’s laptop).


#9

Well i guess i missed something
but it seems your drive wasn’t able to REad the media and the laptop was. And you learnt that the media should work since mine was able to burn on it :smiley:

i think :

12:35:00 AM #14 SCSI -1128 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x05E81000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)

that is where the problem is at, but saddly it means little more then scsi error and sense key: 0x03 (medium_error) Someone more experienced with this might tell you what it means.


#10

@ deepsplash,

Explain Exactly what you mean in your first quoted statement. Be explicit and detailed in what are you scanning in Nero CD DVD Speed that is giving you this error.

From your second quoted statement it appears that there is some type of Error with the “Source” that you are attempting to Burn to your blank Memorex DVR-R Media. Explain in explicit detail Exactly what you are attempting to Burn to your blank Memorex DVR-R Media.

The more detailed pertinent information you provide the easier it will be for Forum Members to Fully understand Exactly what tasks you are attempting to perform with your DVR-112D and Exactly what problems you are encountering will enable Forum Members to provide meaningful assistance.

Regards,
bjkg