Multi session dvd problem

vbimport

#1

hi
i have win xp sp2,lg burner and nero 8.
i was having problem that pc wil not boot when burner attached or another hard disk,i found out that it will boot when i connect burner and choose it as first boot device.
now i want to resume my multisession disk.but nero show some disk as track-unknown-mode1 .here http://i38.tinypic.com/2n84l7d.jpg
.some dvd are identified fine,but some show this error.

also imgburn show that dvd as

HL-DT-ST DVDRAM GH22NS50 TN02 (ATA)
Current Profile: DVD-R

Disc Information:
Status: Incomplete
State of Last Session: Empty
Erasable: No
Sessions: 2
Sectors: 1,443,008
Size: 2,955,280,384 bytes
Time: 320:42:08 (MM:SS:FF)
Free Sectors: 807,760
Free Space: 1,654,292,480 bytes
Free Time: 179:32:10 (MM:SS:FF)
Next Writable Address: 0
Supported Write Speeds: 4x, 8x, 16x, 18x

TOC Information:
Session 1… (LBA: 0)
-> Track 01 (Mode 1, LBA: 0 - 1443007)
-> LeadOut (LBA: 1443008)

Pre-recorded Information:
Manufacturer ID: TTH02

Recording Management Area Information:
HL-DT-ST n128 DVDRAM GH22NS50

Physical Format Information (Last Recorded):
Disc ID: 0@P-!-00
Book Type: DVD-R
Part Version: 5
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 1,639,615
Last Physical Sector in Layer 0: 0

Performance (Write Speed):
Descriptor 1…
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 2298495 (0x0023127F)
-> RS: 9,168 KB/s (6.8x) - WS: 5,540 KB/s (4x)
Descriptor 2…
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 2298495 (0x0023127F)
-> RS: 9,168 KB/s (6.8x) - WS: 11,080 KB/s (8x)
Descriptor 3…
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 2298495 (0x0023127F)
-> RS: 9,168 KB/s (6.8x) - WS: 22,160 KB/s (16x)
Descriptor 4…
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 2298495 (0x0023127F)
-> RS: 9,168 KB/s (6.8x) - WS: 24,930 KB/s (18x)


#2

anyone there ,how can i resume it.


#3

You MUST use the app you have started the ms disc with.


#4

[QUOTE=chef;2537252]You MUST use the app you have started the ms disc with.[/QUOTE]

I have used the same nero and same version to create those discs.


#5

Try another burning app and report bug to nero.


#6

If i run my LG writer about some time it is too warm with in 5 minutes please solved my this problem :slight_smile:

http://www.wsetech.com


#7

The first log shows a crapped disc…


#8

ok i have left trying to write on it and closing the thread